Cub Cadet SLTX1054 warranty Children, Towing, Safe Handling of Gasoline, General Service

Page 5

Children

1.Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. They do not understand the dangers. Never assume that children will remain where you last saw them.

a.Keep children out of the mowing area and in watchful care of a responsible adult other than the operator.

b.Be alert and turn machine off if a child enters the area.

c.Before and while backing, look behind and down for small children.

d.Never carry children, even with the blade(s) shut off. They may fall off and be seriously injured or interfere with safe machine operation.

e.Use extreme care when approaching blind corners, doorways, shrubs, trees or other objects that may block your vision of a child who may run into the path of the machine.

f.To avoid back-over accidents, always disengage the cutting blade(s) before shifting into Reverse. If equipped, the “Reverse Caution Mode” should not be used when children or others are around.

g.Keep children away from hot or running engines. They can suffer burns from a hot muffler.

h.Remove key when machine is unattended to prevent unauthorized operation.

2.Never allow children under 14 years of age to operate this machine. Children 14 and over should read and understand the instructions and safe operation practices in this manual and on the machine and should be trained and supervised by an adult.

Towing

1.Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point.

2.Follow the manufacturers recommendation for weight limits for towed equipment and towing on slopes.

3.Never allow children or others in or on towed equipment.

4.On slopes, the weight of the towed equipment may cause loss of traction and loss of control.

5.Always use extra caution when towing with a machine capable of making tight turns (e.g. “zero-turn” ride-on mower). Make wide turns to avoid jack-knifing.

6.Travel slowly and allow extra distance to stop.

7.Do not shift to neutral and coast downhill.

Service

Safe Handling of Gasoline:

1.To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes which can ignite. Wash your skin and change clothes immediately.

a.Use only an approved gasoline container.

b.Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling.

c.When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.

d.Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

e.Extinguish all cigarettes, cigars, pipes and other sources of ignition.

f.Never fuel machine indoors.

g.Never remove gas cap or add fuel while the engine is hot or running. Allow engine to cool at least two minutes before refueling.

h.Never over fill fuel tank. Fill tank to no more than ½ inch below bottom of filler neck to allow space for fuel expansion.

i.Replace gasoline cap and tighten securely.

j.If gasoline is spilled, wipe it off the engine and equipment. Move machine to another area. Wait 5 minutes before starting the engine.

k.To reduce fire hazards, keep machine free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage and remove any fuel soaked debris.

l.Never store the machine or fuel container inside where there is an open flame, spark or pilot light as on a water heater, space heater, furnace, clothes dryer or other gas appliances.

m.Allow a machine to cool at least five minutes before storing.

General Service

1.Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless, and deadly gas.

2.Before cleaning, repairing, or inspecting, make certain the blade(s) and all moving parts have stopped. Disconnect the spark plug wire and ground against the engine to prevent unintended starting.

Section 2 — Important Safe Operation Practices

5

Image 5 Contents
Operator’s Manual To The Owner Table of ContentsThank You Record Product InformationCalifornia Proposition General Operation Important Safe Operation PracticesDo Not Slope OperationGeneral Service ServiceChildren TowingSpark Arrestor Do not modify engineSymbol Safety SymbolsImportant Safe Operation Practices Tractor Set-Up Assembly & Set-UpContents of Crate Checking Tire Pressure Connecting the Battery CablesSetting the Deck Gauge Wheels Gas and Oil Adjusting the SeatSeat Adjustment Lever Controls and FeaturesBrake Pedal Throttle/Choke Control LeverSystems Indicator Monitor/Hour Meter LCD Ignition Switch ModuleDeck Lift Lever Drive PedalParking Brake/Cruise Control Lever Fuel Level IndicatorPTO / Blade Engage Knob Operation Safety Interlock SwitchesStarting the Engine Stopping the EngineDriving The Tractor Reverse Caution ModeUsing the Deck Lift Lever Engaging the Parking Brake Setting the Cruise ControlDriving On Slopes Operating the HeadlightsMowing OnoffMaintenance Schedule Maintenance & AdjustmentsMaintenance Changing the Engine OilSmart Jet Cleaning the TractorAir Cleaner Spark Plug Hydrostatic Transmission Front Wheels LubricationPivot Points & Linkage Deck WheelsLeveling the Deck Front To Rear AdjustmentsDeck Spindle Parking Brake Adjustment Steering AdjustmentBall Joint Adjustment Gear Hex Bolt Leveling the Deck Side to SideInsert Ratchet Here Deck Idler Bracket ServiceCutting Deck Removal Flange Lock Nut Block of Wood Cutting BladesDeck Lift Arm Deck Support Pin Charging BatteryJump Starting Tires Changing the Deck Belt FuseChanging the Transmission Drive Belt Hex Screws Belt Keeper RodPTO Belt PulleyOuter Spindle Pulleys Problem Cause Remedy TroubleshootingComponent Part Number and Description Replacement PartsPart Number and Description ComponentModel Number Description Attachments & AccessoriesPage Your Warranty Rights and Obligations Vapor lines U.S.A Manual del Operador Gracias Al propietarioÍndice Registro de información de productoFuncionamiento general Medidas importantes de seguridadProposición 65 de California No haga lo siguiente Funcionamiento en pendientesHaga lo siguiente Niños ServicioRemolque Manejo seguro de la gasolinaGuardachispas No modifique el motorAviso referido a emisiones Advertencia Superficie Caliente El poste de una empalizada Configuración del tractor Montaje y ConfiguraciónContenido del cajón Mover Manualmente el TractorAjuste de las ruedas de calibración de la plataforma Instalación del cable de la bateríasControl de la presión de los neumáticos Gasolina y aceite Ajuste del asientoControl del regulador/cebador Controles y CaracterísticasPedal de freno Palanca de ajuste del asientoPedal de la marcha atrás Módulo del interruptor de encendidoPedal de la transmisión Batería Si el motor equipados Cargo NetoIndicador de nivel de combustible Detención del motor FuncionamientoEncendido del motor Botón de Conducción del tractorOperación en pendientes Funcionamiento de los faros delanteros Corte de céspedUtilización de la palanca de elevación de la plataforma Activación del control de crucero Colocación del freno de manoCalendario de mantenimiento Mantenimiento y AjustesMantenimiento MotorDepurador de aire Limpieza del tractorBujía de encendido Palanca de cambioRuedas delanteras LubricaciónPuntos de pivote y varillaje Ruedas de plataformaNivelación de la plataforma adelante atrás AjustesHusillo de plataforma Ajuste del freno de mano Nivelación de la plataforma lado a ladoAjuste del volante Engranaje De ajuste Perno HexagonalInserte aquí Trinquete Soporte de la Cubierta Polea ServicioExtracción de la plataforma de corte Para retirar las cuchillas, haga lo siguiente Cuchillas de corteCarga de la batería BateríaArranque por medio de conexión en puente Neumáticos FusibleCambio de la correa de transmisión Cambio de la correa de la plataformaPTO Cebador no activado Solución de ProblemasEl motor vacila a altas Componente Piezas de reemplazoComponente Número de pieza y Descripción Descripción Aditamentos y AccesoriosSUS Derechos Y Obligaciones EN Cuanto a LA Garantía Líneas de vapor GDOC-100014 REV. B