Cub Cadet EX2900, EX3200 manual Working with Your Tractor, Considerations for Safety of Children

Page 13

1. SAFETY PRECAUTIONS

8.Avoid accidental contact with control pedals while the engine is running, as this can cause unexpected movement of the tractor.

9.Never leave a running machine unattended.

2. Working with Your Tractor

1.Tow an implement only with the drawbar. Do not hitch via the axle housing. The tractor can upset, leading to serious injury or death. Make certain the drawbar pin is locked in place.

2.Any towed vehicle with a total weight exceeding that of the tractor should be equipped with its own braking system that is operational from the tractor seat.

3.Make sure that all the covers and guards are in position. Replace any missing or damaged cover immediately.

4.Before turning or when traveling on a rough terrain, or before stopping, decrease the tractor speed in order to prevent upsetting.

5.Use extra caution when operating over rough ground, when crossing ditches or slopes, and when turning corners.

6.Do not attempt to turn with the differential lock engaged. Attempting to turn the tractor while the differential lock is engaged can lead to a roll-over.

7.Stay clear of ditches, holes, embankments or ponds. A hazard of tractor upset can occur more easily if the ground is soft or wet. Before entering an area covered with tall grass, walk the area to detect any obstacles.

8.Always watch where you are going, especially at blind corners, trees, or other objects that can obscure your vision. Remain alert when you are approaching the end of a row, trees or any obstacle.

9.When two or more people are working in one area, always keep in good communication with each other.

10.Do not get on or off a moving tractor.

11.Make certain all tractor lights are illuminated when operating at night.

3. Considerations for Safety of Children

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine. They do not understand the dangers. Never assume they will remain where you last saw them.

1.Keep children out of the operating area and in the watchful care of an adult other than the operator.

2.Be alert if a child enters the work area, stop your tractor immediately.

3.Never allow a child to ride on the tractor. They may fall off and be seriously injured or interfere with safe machine operation.

4.Never allow children under 16 years old to operate the machine. Children 16 years and over should only operate machine under close parental supervision and proper instruction.

5.Be extremely careful when backing the tractor. Before and during backing, look back and downward. A child may be in your path.

6.Use extra care when approaching blind corners, shrubs, trees or other objects that may obscure your vision of a child or other hazard.

7.Never allow a child to play on the tractor or implement.

8.Keep children away from hot or running engines. They may suffer burns.

9.Park your tractor on a solid, flat and level place. Engage the parking brake securely, remove the starter key switch to prevent unauthorized operation. If parking on a slope is unavoidable, park the tractor across the slope and chock the wheels.

1-5

Ex2900 / 3200 Operator's Manual

Image 13
Contents Page Page Welcome to the World of Cub Cadet Yanmar Tractor IntroductionEx2900 / 3200 Operator’s Manual Table of Contents Point Hitch and Drawbar 11-1 14-16 18-1 About This Manual Safety PrecautionsSafety Alert Symbol Precautions Before Operating Your Tractor Starting Your Tractor Safe Practices for Operating Your TractorWorking with Your Tractor Considerations for Safety of ChildrenDo not Operating Your Tractor on SlopesSafe Practices for Parking Your Tractor Traveling on a RoadUsing the 3-Point Hitch Operating the Power Take Off PTOSafe Practices for Servicing Your Tractor Safety Precautions Safety-Alert Symbol Understanding the Tractor Safety DecalsCare of DANGER, Warning and Caution Decals CY1A8160-85180 CY1A8160-85170CY1A8160-65321 CY1A8160-65350 CY1A8160-65310CY1A8160-65370 CY1A8160-65360CY1A8160-51520 CY1A8160-65300BCY1A7880-65620 CY124764-44810 CY198220-65621CY119629-77091 Servicing the Tractor Specifications Table SpecificationsTraveling Speeds Implement Capacities Implement Capacities Appearance Names and Functions of ComponentsOperator Station Controls Instrument Panel, Switches and Hand Controls Hazard Lights Button Switch Headlight / Turn Signal SwitchPRE-OPERATION Check Precautions Before the OperationPre-Operation Check Routine CheckStarting the Engine Operating the EngineSet the range shift lever to the Neutral position Depress the clutch pedal Pull the throttle control lever by 1/3 to 1/2 StrokeOFF position Turn the starter key switch to the Start positionOn position Start positionChecking the Lights on the Instrument Panel Important Avoid starter damage Starting the Engine in Cold WeatherShutting Down the Engine Turn the range shift lever to the Neutral position Restarting a stalled EngineImportant Avoid engine damage Accident Hazard Operating the TractorChanging the lubricating oil for the new tractor Operating a New TractorRaising and Lowering the Roll-Over Protective Structure Rops Raising Unfolding the Roll-Over Protective Structure Rops Operation of the Tractor Adjust the operators position. Adjusting the Operators SeatFastening the Retractable Seat Belt Turn signals switchHazard Lights HeadlightsStart the engine Select travel speed. Range Shift LeverWheel Drive Lever Disengage the parking brake Raise the implementDrive Pedals Disengaging the Cruise Control Engaging the Cruise ControlStopping Travel of the Tractor Emergency Stop ProcedureAvoid injury Slow down before making a turn Engaging the Parking Brake Parking the TractorDisengaging the parking brake Differential Lock Safe Practices for OperationEngaging the Differential Lock Disengaging the Differential LockSafely Driving the Tractor on Roads Pushing or Towing the Tractor Operating on Slopes Transporting the Tractor on a Trailer3013748 Uphill / Downhill About the Power SteeringSteep Downhill Be careful to avoid injury Power Take OFF PTONeutral position Installing an Implement to the Power Take Off PTO Drivelines Power Take OFF PTO Switch plunger Seat safety switch Point Hitch Point Hitch and DrawbarPrepare the Implement Being Mounted 10-1Top Link Using the 3-Point Hitch Adjusting the Right Lift LinkSway Links 10-2Drawbar Adjusting the DrawbarMaximum Allowable Load on the Drawbar 10-310-4 Using the Safety ChainPoint Hitch Control System Hydraulic System11-1 11-2 Hydraulic Flow Control / Stop KnobImplement Control Lever Controlling the Implement Control Valve11-3 11-4 Using the Hydraulic Lock Lever11-5 Connecting the Implement Hydraulic HosesTires TIRES, Wheels and Ballast12-1 Service Intervals Wheel AdjustmentChecking the Wheel Bolt Tightening Torque Specified TorqueTread Centerline Width Adjusting the Rear Tread12-3 Rear Wheels Front WheelsBallast Front End Weights optionFront Ballast 12-4Using Liquid Weight for the Tires Maximum Weight12-5 Avoid injuryMaintenance Check List Maintenance13-1 13-2 LubricantsTechnical Document Replacement PartsParts 13-3Warranty and Repair of the Engine Periodic ServiceExplosion Hazard 14-1Opening / Closing the Hood Opening / Closing the Hood and Side PanelsOpening the Hood 14-2Opening / Closing the Side Panels Closing the Hood14-3 Checking the Engine Oil Level Daily Checks14-4 14-5 Inspecting the Transmission Oil Level14-6 Checking and Adjusting the BrakeChecking the Radiator Hoses and Clamps Checking and Adjusting the Clutch14-7 14-8 Checking the Tire Air PressureTire pressures Cleaning the Radiator Cooling Fins Cleaning the Radiator Cooling Screen14-9 Checking the Power Steering line Cleaning the Grille and Side ScreensChecking the Fuel line Checking the Headlights, Hazard Lights, etc14-11 Checking the Cooling System14-12 Refilling the Fuel TankBio-diesel Fuels 14-13 Inspection Procedure for Safety Interlock SystemMid-Power Take Off PTO Engagement Lever Switch option Range Shift Lever Neutral Switch14-14 Seat Safety Switch Rear Power Take Off PTO Engagement Lever Switch14-15 First 50 Hours Every 50 Hours Grease SpecificationsChecking the Front Axle Oil Level 14-1714-18 Lubricating Grease Fittings on the TractorExtremely wet or muddy conditions All other conditionsLubricating the Seat Slide Rails Lubricating the Hydraulic Implement Control Valve LinkageLubricating the 3-Point Hitch 14-19Servicing the Fan and Alternator Belt Adjusting the Belt TensionChecking the Belt Tension Replacing the BeltChecking the Fuel / Water Separator Checking the Battery Condition14-21 Servicing the Air Filter Element Every 100 HoursServicing the Primary Air Filter Element 14-2214-23 Servicing the Secondary Air Filter Element14-24 Engine Oil Every 200 HoursChanging the Engine Oil and Filter 14-25Checking the Air Intake Hoses and Clamps Inspecting and Adjusting the Toe-in14-26 Every 300 Hours Illustration shows a Mid-Power Take Off PTO-typeTransmission Oil 14-2714-28 Front Axle Case Oil Every 500 HoursChanging the Front Axle Case Oil 14-2914-30 Replacing the Fuel FilterServicing the Cooling System Every 1000 HoursDraining the Cooling System 14-31Filling the Cooling System Flushing the Cooling System14-32 Recommended Engine Coolant Adjusting the Engine Valve ClearanceChecking the Fuel Injection Nozzle Checking the Fuel Injection PumpSelecting the Rotational Direction of Front Tires General MaintenanceChanging Wheel Spacing and Tread Width 14-34Special Note for the Battery Battery15-1 15-2 Servicing the Battery SafelyRemoving and Installing the Battery Inspecting the BatteryRemoving the Battery 15-3Cleaning the Battery and Terminals Installing the Battery15-4 15-5 Using a Booster BatteryFuses Replacing the Accessory FusesChecking the Alternator Fuse and the Main Fuse 15-6Replacing the Headlight Bulb Bulb15-7 Avoid personal injuryReplacing the Tail Light Bulb Replacing the Turn Signal / Hazard Lights Bulb15-8 Headlights Adjusting the HeadlightsReplacing the Instrument Panel Light Bulb 15-9Safe Practices for Storage StoragePreparing the Machine for Storage 16-1Engine Preparing the Fuel and Engine for Storage16-2 Important Be very careful to avoid damage16-3 Preparing the Stored Tractor for OperationHow to Use the Troubleshooting Table Troubleshooting17-1 17-2 MachineSteering Brake17-3 18-1 Index
Related manuals
Manual 3 pages 8.69 Kb

EX2900, EX3200 specifications

The Cub Cadet EX2900 and EX3200 models represent a top tier of sub-compact tractors, designed to meet the diverse needs of homeowners and landscape professionals. Renowned for their reliability and performance, these tractors are equipped with robust features and advanced technologies.

At the heart of the EX2900 and EX3200 is a powerful, fuel-efficient engine. The EX2900 boasts a 29 horsepower engine, while the EX3200 takes it up a notch with a 32 horsepower variant. Both engines feature a liquid cooling system, ensuring optimal performance even under heavy loads. This added power allows for efficient operation of various implements such as loaders, mowers, and tillers, making them ideal for a range of tasks from mowing lawns to landscaping and agricultural duties.

One of the standout characteristics of these models is their hydrostatic transmission. This allows for smooth, effortless speed control and direction changes without the need for manual gear shifting. Operators appreciate the ease of use, especially when navigating tight spaces or performing multiple tasks in quick succession.

Comfort and convenience are also prominent in the design of the EX2900 and EX3200. The spacious operator station features an ergonomic seat with ample legroom, providing comfort during long hours of operation. Easy-to-reach controls and a dashboard with clear indicators enhance usability, making tasks simpler and more efficient.

In addition to power and comfort, these tractors emphasize versatility. A quick-attach loader system allows users to switch out attachments swiftly, adapting to a variety of chores. The three-point hitch increases compatibility with various implements, giving owners the flexibility to tackle different jobs with ease.

Cub Cadet has integrated advanced technology into the EX2900 and EX3200 models to enhance performance further. A 12-volt electrical system provides reliable starting power, while the LED headlights improve visibility during early morning or evening operations. Safety features such as an ROPS (Roll-Over Protective Structure) add an additional layer of protection for operators.

Overall, the Cub Cadet EX2900 and EX3200 tractors combine power, comfort, and versatility, making them ideal choices for homeowners and professionals alike. With their dependable performance and user-friendly features, these models are built to tackle everything from simple yard maintenance to more demanding agricultural tasks, delivering quality and reliability in every job.