Cub Cadet EX3200, EX2900 manual Daily Checks, Checking the Engine Oil Level, 14-4

Page 86

14. PERIODIC SERVICE

2.Daily Checks

Checking the Engine Oil Level

IMPORTANT: Avoid damage.

●ALWAYS check the oil level daily. If the oil level is low, a serious engine problem can occur.

●ALWAYS check the oil level before operation.

●ALWAYS check the oil level when the engine is cold and not running.

●ALWAYS maintain the oil level between the lower and the upper marks.

●ALWAYS shut the engine down and allow to cool before adding the engine oil.

NOTE:

●Check the oil level twice a day if the engine is run longer than 4 hours a day.

●Ensure that the engine is cold when checking the engine oil level.

1.Park the tractor on a level surface.

2.Raise the hood.

IMPORTANT: Avoid damage.

●When the oil level is checked, dirt and dust can enter the engine. Clean the area around the dipstick before removing it.

3.Remove the side panel on the right side of the engine.

4.Remove the dipstick. Clean the dipstick blade with a clean rag.

5.Reinstall the dipstick.

6.Remove the dipstick again.

7.Read the oil level on the dipstick. The oil level should be between the lower and the upper marks on the dipstick.

8.If the oil level is low:

(1)Remove the oil fill cap.

(2)Add the specified oil until the oil level is in the operating range on the dipstick.

NOTICE

●NEVER overfill the engine with oil.

9.If the oil exceeds the upper mark level on the dipstick, drain to a proper level.

10.Reinstall the dipstick.

11.Reinstall the side panel.

12.Lower the hood.

upper

lower

A3013711

(A)

(B)

3013704

upper

lower

A3013711

(A)Dipstick

(B)Oil fill cap

Ex2900 / 3200 Operator's Manual

14-4

Image 86
Contents Page Page Ex2900 / 3200 Operator’s Manual IntroductionWelcome to the World of Cub Cadet Yanmar Tractor Table of Contents Point Hitch and Drawbar 11-1 14-16 18-1 Safety Precautions About This ManualSafety Alert Symbol Precautions Before Operating Your Tractor Safe Practices for Operating Your Tractor Starting Your TractorConsiderations for Safety of Children Working with Your TractorOperating Your Tractor on Slopes Do notTraveling on a Road Safe Practices for Parking Your TractorOperating the Power Take Off PTO Using the 3-Point HitchSafe Practices for Servicing Your Tractor Safety Precautions Care of DANGER, Warning and Caution Decals Understanding the Tractor Safety DecalsSafety-Alert Symbol CY1A8160-65321 CY1A8160-85170CY1A8160-85180 CY1A8160-65370 CY1A8160-65310CY1A8160-65350 CY1A8160-65360BCY1A7880-65620 CY1A8160-65300CY1A8160-51520 CY119629-77091 CY198220-65621CY124764-44810 Servicing the Tractor Specifications Specifications TableTraveling Speeds Implement Capacities Implement Capacities Names and Functions of Components AppearanceOperator Station Controls Instrument Panel, Switches and Hand Controls Headlight / Turn Signal Switch Hazard Lights Button SwitchPre-Operation Check Precautions Before the OperationPRE-OPERATION Check Routine CheckOperating the Engine Starting the EngineSet the range shift lever to the Neutral position Pull the throttle control lever by 1/3 to 1/2 Stroke Depress the clutch pedalOn position Turn the starter key switch to the Start positionOFF position Start positionChecking the Lights on the Instrument Panel Starting the Engine in Cold Weather Important Avoid starter damageShutting Down the Engine Important Avoid engine damage Restarting a stalled EngineTurn the range shift lever to the Neutral position Operating the Tractor Accident HazardOperating a New Tractor Changing the lubricating oil for the new tractorRaising and Lowering the Roll-Over Protective Structure Rops Raising Unfolding the Roll-Over Protective Structure Rops Adjust the operators position. Adjusting the Operators Seat Operation of the TractorTurn signals switch Fastening the Retractable Seat BeltStart the engine HeadlightsHazard Lights Select travel speed. Range Shift LeverWheel Drive Lever Raise the implement Disengage the parking brakeDrive Pedals Engaging the Cruise Control Disengaging the Cruise ControlAvoid injury Slow down before making a turn Emergency Stop ProcedureStopping Travel of the Tractor Disengaging the parking brake Parking the TractorEngaging the Parking Brake Engaging the Differential Lock Safe Practices for OperationDifferential Lock Disengaging the Differential LockSafely Driving the Tractor on Roads Pushing or Towing the Tractor Transporting the Tractor on a Trailer Operating on Slopes3013748 Steep Downhill About the Power SteeringUphill / Downhill Power Take OFF PTO Be careful to avoid injuryNeutral position Installing an Implement to the Power Take Off PTO Drivelines Power Take OFF PTO Switch plunger Seat safety switch Prepare the Implement Being Mounted Point Hitch and DrawbarPoint Hitch 10-1Sway Links Using the 3-Point Hitch Adjusting the Right Lift LinkTop Link 10-2Maximum Allowable Load on the Drawbar Adjusting the DrawbarDrawbar 10-3Using the Safety Chain 10-411-1 Hydraulic SystemPoint Hitch Control System Hydraulic Flow Control / Stop Knob 11-211-3 Controlling the Implement Control ValveImplement Control Lever Using the Hydraulic Lock Lever 11-4Connecting the Implement Hydraulic Hoses 11-512-1 TIRES, Wheels and BallastTires Checking the Wheel Bolt Tightening Torque Wheel AdjustmentService Intervals Specified Torque12-3 Adjusting the Rear TreadTread Centerline Width Rear Wheels Front WheelsFront Ballast Front End Weights optionBallast 12-412-5 Maximum WeightUsing Liquid Weight for the Tires Avoid injury13-1 MaintenanceMaintenance Check List Lubricants 13-2Parts Replacement PartsTechnical Document 13-3Explosion Hazard Periodic ServiceWarranty and Repair of the Engine 14-1Opening the Hood Opening / Closing the Hood and Side PanelsOpening / Closing the Hood 14-214-3 Closing the HoodOpening / Closing the Side Panels 14-4 Daily ChecksChecking the Engine Oil Level Inspecting the Transmission Oil Level 14-5Checking and Adjusting the Brake 14-614-7 Checking and Adjusting the ClutchChecking the Radiator Hoses and Clamps Tire pressures Checking the Tire Air Pressure14-8 14-9 Cleaning the Radiator Cooling ScreenCleaning the Radiator Cooling Fins Checking the Fuel line Cleaning the Grille and Side ScreensChecking the Power Steering line Checking the Headlights, Hazard Lights, etcChecking the Cooling System 14-11Bio-diesel Fuels Refilling the Fuel Tank14-12 Inspection Procedure for Safety Interlock System 14-1314-14 Range Shift Lever Neutral SwitchMid-Power Take Off PTO Engagement Lever Switch option 14-15 Rear Power Take Off PTO Engagement Lever SwitchSeat Safety Switch First 50 Hours Checking the Front Axle Oil Level Grease SpecificationsEvery 50 Hours 14-17Extremely wet or muddy conditions Lubricating Grease Fittings on the Tractor14-18 All other conditionsLubricating the 3-Point Hitch Lubricating the Hydraulic Implement Control Valve LinkageLubricating the Seat Slide Rails 14-19Checking the Belt Tension Adjusting the Belt TensionServicing the Fan and Alternator Belt Replacing the Belt14-21 Checking the Battery ConditionChecking the Fuel / Water Separator Servicing the Primary Air Filter Element Every 100 HoursServicing the Air Filter Element 14-22Servicing the Secondary Air Filter Element 14-2314-24 Changing the Engine Oil and Filter Every 200 HoursEngine Oil 14-2514-26 Inspecting and Adjusting the Toe-inChecking the Air Intake Hoses and Clamps Transmission Oil Illustration shows a Mid-Power Take Off PTO-typeEvery 300 Hours 14-2714-28 Changing the Front Axle Case Oil Every 500 HoursFront Axle Case Oil 14-29Replacing the Fuel Filter 14-30Draining the Cooling System Every 1000 HoursServicing the Cooling System 14-3114-32 Flushing the Cooling SystemFilling the Cooling System Checking the Fuel Injection Nozzle Adjusting the Engine Valve ClearanceRecommended Engine Coolant Checking the Fuel Injection PumpChanging Wheel Spacing and Tread Width General MaintenanceSelecting the Rotational Direction of Front Tires 14-3415-1 BatterySpecial Note for the Battery Servicing the Battery Safely 15-2Removing the Battery Inspecting the BatteryRemoving and Installing the Battery 15-315-4 Installing the BatteryCleaning the Battery and Terminals Using a Booster Battery 15-5Checking the Alternator Fuse and the Main Fuse Replacing the Accessory FusesFuses 15-615-7 BulbReplacing the Headlight Bulb Avoid personal injury15-8 Replacing the Turn Signal / Hazard Lights BulbReplacing the Tail Light Bulb Replacing the Instrument Panel Light Bulb Adjusting the HeadlightsHeadlights 15-9Preparing the Machine for Storage StorageSafe Practices for Storage 16-116-2 Preparing the Fuel and Engine for StorageEngine Important Be very careful to avoid damagePreparing the Stored Tractor for Operation 16-317-1 TroubleshootingHow to Use the Troubleshooting Table Machine 17-217-3 BrakeSteering Index 18-1
Related manuals
Manual 3 pages 8.69 Kb

EX2900, EX3200 specifications

The Cub Cadet EX2900 and EX3200 models represent a top tier of sub-compact tractors, designed to meet the diverse needs of homeowners and landscape professionals. Renowned for their reliability and performance, these tractors are equipped with robust features and advanced technologies.

At the heart of the EX2900 and EX3200 is a powerful, fuel-efficient engine. The EX2900 boasts a 29 horsepower engine, while the EX3200 takes it up a notch with a 32 horsepower variant. Both engines feature a liquid cooling system, ensuring optimal performance even under heavy loads. This added power allows for efficient operation of various implements such as loaders, mowers, and tillers, making them ideal for a range of tasks from mowing lawns to landscaping and agricultural duties.

One of the standout characteristics of these models is their hydrostatic transmission. This allows for smooth, effortless speed control and direction changes without the need for manual gear shifting. Operators appreciate the ease of use, especially when navigating tight spaces or performing multiple tasks in quick succession.

Comfort and convenience are also prominent in the design of the EX2900 and EX3200. The spacious operator station features an ergonomic seat with ample legroom, providing comfort during long hours of operation. Easy-to-reach controls and a dashboard with clear indicators enhance usability, making tasks simpler and more efficient.

In addition to power and comfort, these tractors emphasize versatility. A quick-attach loader system allows users to switch out attachments swiftly, adapting to a variety of chores. The three-point hitch increases compatibility with various implements, giving owners the flexibility to tackle different jobs with ease.

Cub Cadet has integrated advanced technology into the EX2900 and EX3200 models to enhance performance further. A 12-volt electrical system provides reliable starting power, while the LED headlights improve visibility during early morning or evening operations. Safety features such as an ROPS (Roll-Over Protective Structure) add an additional layer of protection for operators.

Overall, the Cub Cadet EX2900 and EX3200 tractors combine power, comfort, and versatility, making them ideal choices for homeowners and professionals alike. With their dependable performance and user-friendly features, these models are built to tackle everything from simple yard maintenance to more demanding agricultural tasks, delivering quality and reliability in every job.