Cub Cadet EX2900, EX3200 manual Inspection Procedure for Safety Interlock System, 14-13

Page 95

14. PERIODIC SERVICE

1.Park the tractor safely.

2.Allow the engine to cool off for several minutes before refueling.

3.Remove the fuel tank cap.

4.Fill the tank with fresh fuel to the bottom of filler neck.

IMPORTANT:

●NEVER overfill the fuel tank.

5. Reinstall the fuel tank cap.

(A) Fuel tank cap

(B) EPA regulation label CY114110-07760

EPA REGULATION

USE LOW SULFER FUEL OR ULTRA LOW SULFER FUEL ONLY

 

(A)

(B)

 

2010682

 

(B)

EPA REGULATION

 

USE LOW SULFER

FUEL OR ULTRA LOW

SULFER FUEL ONLY

■Inspection Procedure for Safety Interlock System

CAUTION

To avoid personal injury, do as follows:

●Read the “Safety Precautions” at the head of this manual.

●Read the danger, warning and caution statements on the safety alert decals on the tractor.

●To avoid possible poisoning from exhaust fumes,

NEVER operate the engine in an enclosed place that lacks adequate ventilation.

●NEVER start the engine while standing on the ground. ALWAYS start the engine from the operator’s seat.

●Before starting the engine, ALWAYS set all the levers to the “NEUTRAL” positions and the Power Take Off (PTO) engagement lever to the “OFF” position.

Check the following points to be sure that the machine is in the normal state and ready to start.

If a fault is detected on the machine, do not operate the machine and contact your local Cub Cadet Yanmar dealer for technical assistance.

Before actuating the Power Take Off (PTO) engagement lever, fully depress the clutch pedal and disengage the clutch.

14-13

Ex2900 / 3200 Operator's Manual

Page 94 Page 96
Image 95
Page 94 Page 96
Contents Page Page Ex2900 / 3200 Operator’s Manual IntroductionWelcome to the World of Cub Cadet Yanmar Tractor Table of Contents Point Hitch and Drawbar 11-1 14-16 18-1 About This Manual Safety PrecautionsSafety Alert Symbol Precautions Before Operating Your Tractor Starting Your Tractor Safe Practices for Operating Your TractorWorking with Your Tractor Considerations for Safety of ChildrenDo not Operating Your Tractor on SlopesSafe Practices for Parking Your Tractor Traveling on a RoadUsing the 3-Point Hitch Operating the Power Take Off PTOSafe Practices for Servicing Your Tractor Safety Precautions Care of DANGER, Warning and Caution Decals Understanding the Tractor Safety DecalsSafety-Alert Symbol CY1A8160-65321 CY1A8160-85170CY1A8160-85180 CY1A8160-65360 CY1A8160-65310CY1A8160-65350 CY1A8160-65370BCY1A7880-65620 CY1A8160-65300CY1A8160-51520 CY119629-77091 CY198220-65621CY124764-44810 Servicing the Tractor Specifications Table SpecificationsTraveling Speeds Implement Capacities Implement Capacities Appearance Names and Functions of ComponentsOperator Station Controls Instrument Panel, Switches and Hand Controls Hazard Lights Button Switch Headlight / Turn Signal SwitchRoutine Check Precautions Before the OperationPRE-OPERATION Check Pre-Operation CheckStarting the Engine Operating the EngineSet the range shift lever to the Neutral position Depress the clutch pedal Pull the throttle control lever by 1/3 to 1/2 StrokeStart position Turn the starter key switch to the Start positionOFF position On positionChecking the Lights on the Instrument Panel Important Avoid starter damage Starting the Engine in Cold WeatherShutting Down the Engine Important Avoid engine damage Restarting a stalled EngineTurn the range shift lever to the Neutral position Accident Hazard Operating the TractorChanging the lubricating oil for the new tractor Operating a New TractorRaising and Lowering the Roll-Over Protective Structure Rops Raising Unfolding the Roll-Over Protective Structure Rops Operation of the Tractor Adjust the operators position. Adjusting the Operators SeatFastening the Retractable Seat Belt Turn signals switchSelect travel speed. Range Shift Lever HeadlightsHazard Lights Start the engineWheel Drive Lever Disengage the parking brake Raise the implementDrive Pedals Disengaging the Cruise Control Engaging the Cruise ControlAvoid injury Slow down before making a turn Emergency Stop ProcedureStopping Travel of the Tractor Disengaging the parking brake Parking the TractorEngaging the Parking Brake Disengaging the Differential Lock Safe Practices for OperationDifferential Lock Engaging the Differential LockSafely Driving the Tractor on Roads Pushing or Towing the Tractor Operating on Slopes Transporting the Tractor on a Trailer3013748 Steep Downhill About the Power SteeringUphill / Downhill Be careful to avoid injury Power Take OFF PTONeutral position Installing an Implement to the Power Take Off PTO Drivelines Power Take OFF PTO Switch plunger Seat safety switch 10-1 Point Hitch and DrawbarPoint Hitch Prepare the Implement Being Mounted10-2 Using the 3-Point Hitch Adjusting the Right Lift LinkTop Link Sway Links10-3 Adjusting the DrawbarDrawbar Maximum Allowable Load on the Drawbar10-4 Using the Safety Chain11-1 Hydraulic SystemPoint Hitch Control System 11-2 Hydraulic Flow Control / Stop Knob11-3 Controlling the Implement Control ValveImplement Control Lever 11-4 Using the Hydraulic Lock Lever11-5 Connecting the Implement Hydraulic Hoses12-1 TIRES, Wheels and BallastTires Specified Torque Wheel AdjustmentService Intervals Checking the Wheel Bolt Tightening TorqueRear Wheels Front Wheels Adjusting the Rear TreadTread Centerline Width 12-312-4 Front End Weights optionBallast Front BallastAvoid injury Maximum WeightUsing Liquid Weight for the Tires 12-513-1 MaintenanceMaintenance Check List 13-2 Lubricants13-3 Replacement PartsTechnical Document Parts14-1 Periodic ServiceWarranty and Repair of the Engine Explosion Hazard14-2 Opening / Closing the Hood and Side PanelsOpening / Closing the Hood Opening the Hood14-3 Closing the HoodOpening / Closing the Side Panels 14-4 Daily ChecksChecking the Engine Oil Level 14-5 Inspecting the Transmission Oil Level14-6 Checking and Adjusting the Brake14-7 Checking and Adjusting the ClutchChecking the Radiator Hoses and Clamps Tire pressures Checking the Tire Air Pressure14-8 14-9 Cleaning the Radiator Cooling ScreenCleaning the Radiator Cooling Fins Checking the Headlights, Hazard Lights, etc Cleaning the Grille and Side ScreensChecking the Power Steering line Checking the Fuel line14-11 Checking the Cooling SystemBio-diesel Fuels Refilling the Fuel Tank14-12 14-13 Inspection Procedure for Safety Interlock System14-14 Range Shift Lever Neutral SwitchMid-Power Take Off PTO Engagement Lever Switch option 14-15 Rear Power Take Off PTO Engagement Lever SwitchSeat Safety Switch First 50 Hours 14-17 Grease SpecificationsEvery 50 Hours Checking the Front Axle Oil LevelAll other conditions Lubricating Grease Fittings on the Tractor14-18 Extremely wet or muddy conditions14-19 Lubricating the Hydraulic Implement Control Valve LinkageLubricating the Seat Slide Rails Lubricating the 3-Point HitchReplacing the Belt Adjusting the Belt TensionServicing the Fan and Alternator Belt Checking the Belt Tension14-21 Checking the Battery ConditionChecking the Fuel / Water Separator 14-22 Every 100 HoursServicing the Air Filter Element Servicing the Primary Air Filter Element14-23 Servicing the Secondary Air Filter Element14-24 14-25 Every 200 HoursEngine Oil Changing the Engine Oil and Filter14-26 Inspecting and Adjusting the Toe-inChecking the Air Intake Hoses and Clamps 14-27 Illustration shows a Mid-Power Take Off PTO-typeEvery 300 Hours Transmission Oil14-28 14-29 Every 500 HoursFront Axle Case Oil Changing the Front Axle Case Oil14-30 Replacing the Fuel Filter14-31 Every 1000 HoursServicing the Cooling System Draining the Cooling System14-32 Flushing the Cooling SystemFilling the Cooling System Checking the Fuel Injection Pump Adjusting the Engine Valve ClearanceRecommended Engine Coolant Checking the Fuel Injection Nozzle14-34 General MaintenanceSelecting the Rotational Direction of Front Tires Changing Wheel Spacing and Tread Width15-1 BatterySpecial Note for the Battery 15-2 Servicing the Battery Safely15-3 Inspecting the BatteryRemoving and Installing the Battery Removing the Battery15-4 Installing the BatteryCleaning the Battery and Terminals 15-5 Using a Booster Battery15-6 Replacing the Accessory FusesFuses Checking the Alternator Fuse and the Main FuseAvoid personal injury BulbReplacing the Headlight Bulb 15-715-8 Replacing the Turn Signal / Hazard Lights BulbReplacing the Tail Light Bulb 15-9 Adjusting the HeadlightsHeadlights Replacing the Instrument Panel Light Bulb16-1 StorageSafe Practices for Storage Preparing the Machine for StorageImportant Be very careful to avoid damage Preparing the Fuel and Engine for StorageEngine 16-216-3 Preparing the Stored Tractor for Operation17-1 TroubleshootingHow to Use the Troubleshooting Table 17-2 Machine17-3 BrakeSteering 18-1 Index
Related manuals
Manual 3 pages 8.69 Kb

EX2900, EX3200 specifications

The Cub Cadet EX2900 and EX3200 models represent a top tier of sub-compact tractors, designed to meet the diverse needs of homeowners and landscape professionals. Renowned for their reliability and performance, these tractors are equipped with robust features and advanced technologies.

At the heart of the EX2900 and EX3200 is a powerful, fuel-efficient engine. The EX2900 boasts a 29 horsepower engine, while the EX3200 takes it up a notch with a 32 horsepower variant. Both engines feature a liquid cooling system, ensuring optimal performance even under heavy loads. This added power allows for efficient operation of various implements such as loaders, mowers, and tillers, making them ideal for a range of tasks from mowing lawns to landscaping and agricultural duties.

One of the standout characteristics of these models is their hydrostatic transmission. This allows for smooth, effortless speed control and direction changes without the need for manual gear shifting. Operators appreciate the ease of use, especially when navigating tight spaces or performing multiple tasks in quick succession.

Comfort and convenience are also prominent in the design of the EX2900 and EX3200. The spacious operator station features an ergonomic seat with ample legroom, providing comfort during long hours of operation. Easy-to-reach controls and a dashboard with clear indicators enhance usability, making tasks simpler and more efficient.

In addition to power and comfort, these tractors emphasize versatility. A quick-attach loader system allows users to switch out attachments swiftly, adapting to a variety of chores. The three-point hitch increases compatibility with various implements, giving owners the flexibility to tackle different jobs with ease.

Cub Cadet has integrated advanced technology into the EX2900 and EX3200 models to enhance performance further. A 12-volt electrical system provides reliable starting power, while the LED headlights improve visibility during early morning or evening operations. Safety features such as an ROPS (Roll-Over Protective Structure) add an additional layer of protection for operators.

Overall, the Cub Cadet EX2900 and EX3200 tractors combine power, comfort, and versatility, making them ideal choices for homeowners and professionals alike. With their dependable performance and user-friendly features, these models are built to tackle everything from simple yard maintenance to more demanding agricultural tasks, delivering quality and reliability in every job.
Top Page Image Contents