Cub Cadet 18M warranty Maintaining Your Lawn Mower

Page 10

5

Maintaining

Your Lawn

Mower

WARNING

Always stop engine,

disconnect spark plug, and ground against engine before performing any type of maintenance on your machine.

IMPORTANT: Do not use a pressure washer or garden hose to clean your unit. These may cause damage to electric components, spindles, pulleys, bear- ings, or the engine. The use of water will result in shortened life and reduce serviceability.

Figure 5-1: Areas to lubricate on mower.

A

B

Figure 5-2: Remove rear flap.

General Recommendations

•Always observe safety rules when performing any maintenance.

•The warranty on this lawn mower does not cover items that have been subjected to operator abuse or negligence. To receive full value from warranty, operator must maintain the lawn mower as instructed here.

•Changing of engine-governed speed will void engine warranty.

•All adjustments should be checked at least once each season.

•Periodically check all fasteners and make sure these are tight.

WARNING: Always stop engine, discon- nect spark plug, and ground against engine before performing any type of

maintenance on your machine.

Lubrication

1.Lubricate pivot points on the blade control at least once a season with light oil. The blade control must operate freely in both directions. See Figure 5-1.

2.Lubricate the wheels at least once a season with light oil (or motor oil). If wheels are removed for any reason, lubricate surface of the pivot arm and inner surface of the wheel with light oil. See Figure 5-1.

3.Lubricate the torsion spring and pivot point on the rear discharge door and side mulch plug periodically with light oil to prevent rust. See Figure 5-1.

Deck Care

Clean underside of the mower deck after each use to prevent build-up of grass clippings or other debris. Follow steps below for this job.

1.Disconnect spark plug wire. Drain gasoline from lawn mower or place a piece of plastic under the gas cap.

2.Tip mower so that it rests on the housing. Keep the side with the air cleaner facing up. Hold mower firmly.

WARNING: Never tip the mower more than 90º in any direction and do not leave the mower tipped for any length of

time. Oil can drain into the upper part of the engine causing a starting problem.

3.Scrape and clean the underside of the deck with a suitable tool. Do not spray with water.

4.Put the mower back on its wheels on the ground. If you had put plastic under the gas cap earlier, make sure to remove it now.

Engine Care

NOTE: Refer to the engine operation and maintenance sections in this manual for detailed instructions.

•Maintain oil level.

•Service air cleaner every 25 hours under normal conditions. Clean every few hours under extremely dusty conditions.

•Clean spark plug and reset the gap once a season.

•Clean engine regularly with a cloth or brush. Keep the cooling system (blower housing area) clean to permit proper air circulation. Remove all grass, dirt, and combustible debris from muffler area.

Replacing Rear Flap

1.To remove rear flap, lift rear door, and press flap in on either side to remove from hole. See Figure 5-2.

2.Remove flap from opposite hole and replace with new flap in the opposite order and manner of removal.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Inch Self Propelled Rotary Lawn Mower Model 18M 2007Finding and Recording Model Number Table of ContentsCustomer Support Slope Gauge General Operation ChildrenYour Responsibility Service Slope OperationBrackets Upper and lower handlesCrimp cable while lifting the handle up Carriage bolt is seated properly in the handleAttach center top of bag from inside of bag Setup AdjustmentAdjustments Never operate mowerOperating Your Lawn Mower Know Your Lawn MowerUsing the Grass Catcher Using Your Lawn MowerUsing as a Mulcher Starting EngineMaintaining Your Lawn Mower Belt Care Blade CareSonal injury Off-Season Storage Remove belt from transmission and engine pulleyPage Trouble Shooting Problem Cause RemedySafety Labels Do not remove safety or any labels from mower for any reasonCm below lowest portion of neck to allow for fuel expansion Do not choke carburetor to stop engineRunning engine produces Safety Label LocationInternational Symbols and Meanings Grass, brush, etc., can Catch fireKnow Your Engine Ambient TemperatureOperating Your Engine Pre-Operation CheckStarting The Engine Check Oil LevelCheck Fuel Level Stopping The EngineMaintenance Schedule Maintaining YourMaintaining Your Engine Air Cleaner ServiceSpark Plug Service Never use gasolineStorage Clean EngineAccumulation Removing From StoragePage Model 18M Or visit Parts ListTo order replacement DescriptionEngine 1P70FUA Illustrated Parts List Page Page MANUFACTURER’S Warranty Coverage EPA-1 MANUFACTURER’S Limited Warranty for

18M specifications

The Cub Cadet 18M is a dynamic and efficient lawn mower designed for homeowners seeking both performance and durability. As part of the Cub Cadet family, this model combines advanced technology with user-friendly features to create an exceptional mowing experience.

One of the standout characteristics of the Cub Cadet 18M is its powerful engine. Equipped with a robust and reliable engine, it provides consistent performance while tackling various grass types. This engine is designed to deliver high torque and efficiency, ensuring optimal cutting power even in thick or uneven lawns.

The cutting deck of the Cub Cadet 18M is another vital feature. Its wide cutting width allows for a faster mowing experience, reducing the time spent on the lawn without compromising on quality. The deck is also designed for easy height adjustment, enabling users to select their preferred grass length. This adaptability is especially useful for homeowners maintaining diverse landscaping with different grass heights.

For convenience, the Cub Cadet 18M boasts a user-friendly control panel. This panel allows for smooth operation with easily accessible controls that enhance the overall mowing experience. The ergonomic design ensures comfort during extended use, reducing fatigue and improving efficiency.

In terms of technology, the Cub Cadet 18M incorporates advanced cutting technologies that enhance its performance. The signature Triple-blade cutting system provides a precise and clean cut, promoting healthy lawn growth. The blades are designed for durability and easy maintenance, ensuring that users can keep their mower in peak condition with minimal effort.

The maneuverability of the Cub Cadet 18M is exemplary. Its compact design allows it to navigate through tight spaces and around obstacles with ease, making it ideal for residential lawns with landscaping features such as flower beds or trees.

Safety is a paramount concern with the Cub Cadet 18M, which includes features such as an automatic shut-off mechanism that activates when the operator releases the control handles. This built-in safety feature reduces the risk of accidents, providing peace of mind to users.

In summary, the Cub Cadet 18M is a well-rounded lawn mower that combines a powerful engine, versatile cutting capabilities, user-friendly features, and advanced technologies. Its emphasis on performance and safety makes it an excellent choice for homeowners seeking to maintain their lawns with efficiency and precision.
Top Page Image Contents