Cub Cadet 18M warranty Check Oil Level, Check Fuel Level, Starting The Engine, Stopping The Engine

Page 19

Check Oil Level

IMPORTANT: Be sure to check the engine on a level surface with the engine stopped.

1.Remove the oil filler cap and wipe the dipstick clean. See Figure 9-2.

2.Insert the dipstick into the oil filler neck, but do not screw it in.

3.If the level is low, slowly add oil to the upper limit on the dipstick. See Figure 9-2 inset.

4.Tighten dipstick firmly before starting engine.

IMPORTANT: Do not overfill. Overfilling with oil may cause smoking, hard starting, spark plug fouling, or oil saturation of air cleaner.

Fuel Recommendations

Use automotive gasoline (Unleaded or low leaded to minimize combustion chamber deposits). Never use an oil/gasoline mixture or dirty gasoline. Avoid getting dirt, dust, or water in the fuel tank.

WARNING: Gasoline is extremely flam- mable and is explosive under certain conditions.

Refuel in a well-ventilated area with the engine stopped. Do not smoke or allow flames or sparks in the area where the engine is refueled or where gasoline is stored.

Do not overfill the fuel tank (there should be no fuel in the filler neck). After refueling, make sure the tank cap is closed properly and securely.

Be careful not to spill fuel when refueling. Spilled fuel or fuel vapor may ignite. If any fuel is spilled, make sure the area is dry before starting the engine.

Avoid repeated or prolonged contact with skin or breathing of vapor.

Check Fuel Level

1.Clean around fuel fill before removing cap to fuel.

2.Fill tank to approximately 1-inch below lowest portion of neck to allow for fuel expansion. Be careful not to overfill.

IMPORTANT: Before refueling, allow engine to cool 2 minutes.

Starting The Engine

WARNING: Always keep hands and feet clear of equipment moving parts. Do not use a pressurized starting fluid. Vapors are flammable.

Oil Fill Cap/

Dipstick

Upper Level

Figure 9-2: Checking the oil level.

2

3

4

1

 

Figure 9-3: Starting the mower. (Your mower may differ from that shown)

2.Standing behind the mower, depress the blade control handle and hold it against the upper handle.

3.Pull the starter grip lightly until resistance is felt, then pull rapidly to overcome compression, prevent kickback, and start engine. Repeat if necessary. See Figure 9-3.

IMPORTANT: Do not allow the starter grip to snap back against the rope guide. Return it gently to prevent damage to the starter.

4.When engine warms up, push in the choke knob. See Figure 9-3.

9

Operating

Your

Engine

WARNING

Always keep hands and feet clear of equipment moving parts. Do not use a pressurized starting fluid. Vapors are flam- mable.

IMPORTANT: Do not allow the starter grip to snap back against the engine. Return it gently to prevent damage to the starter.

1. Pull out the choke knob located on the left side of

Stopping The Engine

1. Release the blade control.

the upper handle. See Figure 9-3. Use of the choke

 

may not be necessary if the engine is warm or the air

 

temperature is high.

 

 

 

 

 

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 2007 Inch Self Propelled Rotary Lawn Mower Model 18MFinding and Recording Model Number Table of ContentsCustomer Support Slope Gauge General Operation ChildrenYour Responsibility Slope Operation ServiceCarriage bolt is seated properly in the handle Upper and lower handlesCrimp cable while lifting the handle up BracketsNever operate mower Setup AdjustmentAdjustments Attach center top of bag from inside of bagKnow Your Lawn Mower Operating Your Lawn MowerStarting Engine Using Your Lawn MowerUsing as a Mulcher Using the Grass CatcherMaintaining Your Lawn Mower Belt Care Blade CareSonal injury Remove belt from transmission and engine pulley Off-Season StoragePage Problem Cause Remedy Trouble ShootingDo not remove safety or any labels from mower for any reason Safety LabelsDo not choke carburetor to stop engine Cm below lowest portion of neck to allow for fuel expansionGrass, brush, etc., can Catch fire Safety Label LocationInternational Symbols and Meanings Running engine producesPre-Operation Check Ambient TemperatureOperating Your Engine Know Your EngineStopping The Engine Check Oil LevelCheck Fuel Level Starting The EngineMaintaining Your Maintenance ScheduleNever use gasoline Air Cleaner ServiceSpark Plug Service Maintaining Your EngineRemoving From Storage Clean EngineAccumulation StoragePage Model 18M Description Parts ListTo order replacement Or visitEngine 1P70FUA Illustrated Parts List Page Page MANUFACTURER’S Warranty Coverage EPA-1 MANUFACTURER’S Limited Warranty for

18M specifications

The Cub Cadet 18M is a dynamic and efficient lawn mower designed for homeowners seeking both performance and durability. As part of the Cub Cadet family, this model combines advanced technology with user-friendly features to create an exceptional mowing experience.

One of the standout characteristics of the Cub Cadet 18M is its powerful engine. Equipped with a robust and reliable engine, it provides consistent performance while tackling various grass types. This engine is designed to deliver high torque and efficiency, ensuring optimal cutting power even in thick or uneven lawns.

The cutting deck of the Cub Cadet 18M is another vital feature. Its wide cutting width allows for a faster mowing experience, reducing the time spent on the lawn without compromising on quality. The deck is also designed for easy height adjustment, enabling users to select their preferred grass length. This adaptability is especially useful for homeowners maintaining diverse landscaping with different grass heights.

For convenience, the Cub Cadet 18M boasts a user-friendly control panel. This panel allows for smooth operation with easily accessible controls that enhance the overall mowing experience. The ergonomic design ensures comfort during extended use, reducing fatigue and improving efficiency.

In terms of technology, the Cub Cadet 18M incorporates advanced cutting technologies that enhance its performance. The signature Triple-blade cutting system provides a precise and clean cut, promoting healthy lawn growth. The blades are designed for durability and easy maintenance, ensuring that users can keep their mower in peak condition with minimal effort.

The maneuverability of the Cub Cadet 18M is exemplary. Its compact design allows it to navigate through tight spaces and around obstacles with ease, making it ideal for residential lawns with landscaping features such as flower beds or trees.

Safety is a paramount concern with the Cub Cadet 18M, which includes features such as an automatic shut-off mechanism that activates when the operator releases the control handles. This built-in safety feature reduces the risk of accidents, providing peace of mind to users.

In summary, the Cub Cadet 18M is a well-rounded lawn mower that combines a powerful engine, versatile cutting capabilities, user-friendly features, and advanced technologies. Its emphasis on performance and safety makes it an excellent choice for homeowners seeking to maintain their lawns with efficiency and precision.
Top Page Image Contents