Cub Cadet 18M warranty Maintaining Your Engine, Air Cleaner Service, Spark Plug Service

Page 21

IMPORTANT: Used motor oil may cause skin cancer if repeatedly left in contact with the skin for prolonged periods. Although this is unlikely unless you handle used oil on a daily basis, it is still advisable to thoroughly wash your hands with soap and water as soon as possible after handling used oil.

NOTE: Please dispose of used motor oil in a manner that is compatible with the environment. We suggest you take it in a sealed container to your local service station for reclamation. Do not throw it in the trash or pour it on the ground.

Air Cleaner Service

A dirty air cleaner will restrict air flow to the carburetor. To prevent carburetor malfunction, service the air cleaner regularly. Service more frequently when operating the engine in extremely dusty areas.

WARNING: Never use gasoline or low flash point solvents for cleaning the air cleaner element. A fire or explosion could result.

IMPORTANT: Never run the engine without the air cleaner. Rapid engine wear will result.

1.Remove the wing bolt and the air cleaner cover. Remove the elements and separate them. See Figure 10-2. Carefully check both elements for holes or tears and replace if damaged.

2.Foam element: Wash the element in a solution of household detergent and warm water, then rinse thoroughly, or wash in nonflammable or high flash point solvent. Allow the element to dry thoroughly. Soak the element in clean engine oil and squeeze out the excess oil. The engine will smoke during initial start-up if too much oil is left in the foam.

3.Paper element: Tap the element lightly several times on a hard surface to remove excess dirt, or blow compressed air through the filter from the inside out. Never try to brush the dirt off; brushing will force dirt into the fibers. Replace the paper element if it is excessively dirty.

Paper Element

Foam Element

Figure 10-2: Servicing the air cleaner.

Spark Plug

Spark Plug Boot

Figure 10-3: The spark plug and boot.

Spark Plug Service

WARNING: DO NOT check for spark with spark plug removed. DO NOT crank engine with spark plug removed.

To ensure proper engine operation, the spark plug must be properly gapped and free of deposits.

1.Remove the spark plug boot and use a spark plug wrench to remove the plug. See Figure 10-3.

WARNING: If the engine has been running, the muffler will be very hot. Be careful not to touch the muffler.

2.Visually inspect the spark plug. Discard the spark plug if there is apparent wear, or if the insulator is cracked or chipped. Clean the spark plug with a wire brush if it is to be reused.

10

Maintaining

Your

Engine

WARNING

Never use gasoline

or low flash point sol- vents for cleaning the air cleaner element.

A fire or explosion

could result.

DO NOT check for

spark with spark plug

removed. DO NOT crank engine with spark plug removed.

If the engine has been running, the muffler will be very hot. Be careful not to touch the muffler.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 2007 Inch Self Propelled Rotary Lawn Mower Model 18MTable of Contents Finding and Recording Model NumberCustomer Support Slope Gauge Children General OperationYour Responsibility Slope Operation ServiceCrimp cable while lifting the handle up Upper and lower handlesBrackets Carriage bolt is seated properly in the handleAdjustments Setup AdjustmentAttach center top of bag from inside of bag Never operate mowerKnow Your Lawn Mower Operating Your Lawn MowerUsing as a Mulcher Using Your Lawn MowerUsing the Grass Catcher Starting EngineMaintaining Your Lawn Mower Blade Care Belt CareSonal injury Remove belt from transmission and engine pulley Off-Season StoragePage Problem Cause Remedy Trouble ShootingDo not remove safety or any labels from mower for any reason Safety LabelsDo not choke carburetor to stop engine Cm below lowest portion of neck to allow for fuel expansionInternational Symbols and Meanings Safety Label LocationRunning engine produces Grass, brush, etc., can Catch fireOperating Your Engine Ambient TemperatureKnow Your Engine Pre-Operation CheckCheck Fuel Level Check Oil LevelStarting The Engine Stopping The EngineMaintaining Your Maintenance ScheduleSpark Plug Service Air Cleaner ServiceMaintaining Your Engine Never use gasolineAccumulation Clean EngineStorage Removing From StoragePage Model 18M To order replacement Parts ListOr visit DescriptionEngine 1P70FUA Illustrated Parts List Page Page MANUFACTURER’S Warranty Coverage EPA-1 MANUFACTURER’S Limited Warranty for

18M specifications

The Cub Cadet 18M is a dynamic and efficient lawn mower designed for homeowners seeking both performance and durability. As part of the Cub Cadet family, this model combines advanced technology with user-friendly features to create an exceptional mowing experience.

One of the standout characteristics of the Cub Cadet 18M is its powerful engine. Equipped with a robust and reliable engine, it provides consistent performance while tackling various grass types. This engine is designed to deliver high torque and efficiency, ensuring optimal cutting power even in thick or uneven lawns.

The cutting deck of the Cub Cadet 18M is another vital feature. Its wide cutting width allows for a faster mowing experience, reducing the time spent on the lawn without compromising on quality. The deck is also designed for easy height adjustment, enabling users to select their preferred grass length. This adaptability is especially useful for homeowners maintaining diverse landscaping with different grass heights.

For convenience, the Cub Cadet 18M boasts a user-friendly control panel. This panel allows for smooth operation with easily accessible controls that enhance the overall mowing experience. The ergonomic design ensures comfort during extended use, reducing fatigue and improving efficiency.

In terms of technology, the Cub Cadet 18M incorporates advanced cutting technologies that enhance its performance. The signature Triple-blade cutting system provides a precise and clean cut, promoting healthy lawn growth. The blades are designed for durability and easy maintenance, ensuring that users can keep their mower in peak condition with minimal effort.

The maneuverability of the Cub Cadet 18M is exemplary. Its compact design allows it to navigate through tight spaces and around obstacles with ease, making it ideal for residential lawns with landscaping features such as flower beds or trees.

Safety is a paramount concern with the Cub Cadet 18M, which includes features such as an automatic shut-off mechanism that activates when the operator releases the control handles. This built-in safety feature reduces the risk of accidents, providing peace of mind to users.

In summary, the Cub Cadet 18M is a well-rounded lawn mower that combines a powerful engine, versatile cutting capabilities, user-friendly features, and advanced technologies. Its emphasis on performance and safety makes it an excellent choice for homeowners seeking to maintain their lawns with efficiency and precision.
Top Page Image Contents