Cub Cadet 18M warranty Blade Care, Belt Care, Sonal injury

Page 11

Blade Care

WARNING: When removing the cutting blade for sharpening or replacement, protect your hands with a pair of heavy

gloves or use a heavy rag to hold the blade.

Periodically inspect the blade adapter for cracks, especially if you strike a foreign object. Replace when necessary. Follow the steps below for blade service.

1.

Disconnect spark plug wire from spark plug. Turn

 

mower on its side making sure that the air filter and

 

the carburetor are facing up.

2.

Remove the bolt and the blade bell support which

 

hold the blade and the blade adapter to the engine

 

crankshaft. See Figure 5-3.

Blade Adapter

Blade Bell Support

Blade

Bolt

5

Maintaining

Your Lawn

Mower

3.

Remove blade and adapter from the crankshaft. See

 

Figure 5-3.

4.

Remove blade from the adapter for testing balance.

 

Balance the blade on a round shaft screwdriver to

 

check. Remove metal from the heavy side until it

 

balances evenly.

 

When sharpening the blade, follow the original angle

 

of grind. Grind each cutting edge equally to keep the

 

blade balanced.

WARNING: An unbalanced blade will cause excessive vibration when rotating at high speeds. It may cause damage to

mower and could break causing personal injury.

5.Lubricate the engine crankshaft and the inner surface of the blade adapter with light oil. Slide the blade adapter onto the engine crankshaft. Place the blade on the adapter such that the side of the blade marked “Bottom” (or with part number) faces the ground when the mower is in the operating position. Make sure that the blade is aligned and seated on the blade adapter flanges.

Figure 5-3: Remove the bolt and blade bell support to access the blade.

6.Place blade bell support on the blade. Align notches on the blade bell support with small holes in blade.

7.Replace hex bolt and tighten hex bolt to torque: 450 in. lbs. min., 600 in. lbs. max.

To ensure safe operation of your mower, periodically check the blade bolt for correct torque.

Belt Care

1.Disconnect the spark plug wire and ground it against the engine.

2.Drain the fuel tank or place a piece of plastic beneath the cap to prevent gasoline leakage.

3.Tip mower on its side (air cleaner side of engine up).

4.Remove blade, adapter, and related hardware as instructed under “Blade Care” above. See Figure 5-3.

WARNING

When removing the cutting blade for sharpening or replacement, protect your hands with a pair of heavy gloves or use a heavy rag to hold the blade.

An unbalanced blade will cause excessive vibration when rotat- ing at high speeds. It may cause damage to mower and could break causing per-

sonal injury.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 2007 Inch Self Propelled Rotary Lawn Mower Model 18MCustomer Support Table of ContentsFinding and Recording Model Number Slope Gauge Your Responsibility ChildrenGeneral Operation Slope Operation ServiceCarriage bolt is seated properly in the handle Upper and lower handlesCrimp cable while lifting the handle up BracketsNever operate mower Setup AdjustmentAdjustments Attach center top of bag from inside of bagKnow Your Lawn Mower Operating Your Lawn MowerStarting Engine Using Your Lawn MowerUsing as a Mulcher Using the Grass CatcherMaintaining Your Lawn Mower Sonal injury Blade CareBelt Care Remove belt from transmission and engine pulley Off-Season StoragePage Problem Cause Remedy Trouble ShootingDo not remove safety or any labels from mower for any reason Safety LabelsDo not choke carburetor to stop engine Cm below lowest portion of neck to allow for fuel expansionGrass, brush, etc., can Catch fire Safety Label LocationInternational Symbols and Meanings Running engine producesPre-Operation Check Ambient TemperatureOperating Your Engine Know Your EngineStopping The Engine Check Oil LevelCheck Fuel Level Starting The EngineMaintaining Your Maintenance ScheduleNever use gasoline Air Cleaner ServiceSpark Plug Service Maintaining Your EngineRemoving From Storage Clean EngineAccumulation StoragePage Model 18M Description Parts ListTo order replacement Or visitEngine 1P70FUA Illustrated Parts List Page Page MANUFACTURER’S Warranty Coverage EPA-1 MANUFACTURER’S Limited Warranty for

18M specifications

The Cub Cadet 18M is a dynamic and efficient lawn mower designed for homeowners seeking both performance and durability. As part of the Cub Cadet family, this model combines advanced technology with user-friendly features to create an exceptional mowing experience.

One of the standout characteristics of the Cub Cadet 18M is its powerful engine. Equipped with a robust and reliable engine, it provides consistent performance while tackling various grass types. This engine is designed to deliver high torque and efficiency, ensuring optimal cutting power even in thick or uneven lawns.

The cutting deck of the Cub Cadet 18M is another vital feature. Its wide cutting width allows for a faster mowing experience, reducing the time spent on the lawn without compromising on quality. The deck is also designed for easy height adjustment, enabling users to select their preferred grass length. This adaptability is especially useful for homeowners maintaining diverse landscaping with different grass heights.

For convenience, the Cub Cadet 18M boasts a user-friendly control panel. This panel allows for smooth operation with easily accessible controls that enhance the overall mowing experience. The ergonomic design ensures comfort during extended use, reducing fatigue and improving efficiency.

In terms of technology, the Cub Cadet 18M incorporates advanced cutting technologies that enhance its performance. The signature Triple-blade cutting system provides a precise and clean cut, promoting healthy lawn growth. The blades are designed for durability and easy maintenance, ensuring that users can keep their mower in peak condition with minimal effort.

The maneuverability of the Cub Cadet 18M is exemplary. Its compact design allows it to navigate through tight spaces and around obstacles with ease, making it ideal for residential lawns with landscaping features such as flower beds or trees.

Safety is a paramount concern with the Cub Cadet 18M, which includes features such as an automatic shut-off mechanism that activates when the operator releases the control handles. This built-in safety feature reduces the risk of accidents, providing peace of mind to users.

In summary, the Cub Cadet 18M is a well-rounded lawn mower that combines a powerful engine, versatile cutting capabilities, user-friendly features, and advanced technologies. Its emphasis on performance and safety makes it an excellent choice for homeowners seeking to maintain their lawns with efficiency and precision.
Top Page Image Contents