Cub Cadet 18M Operating Your Engine, Know Your Engine, Pre-Operation Check, Oil Recommendations

Page 18

9

Operating

Your

Engine

Know Your Engine

Fuel Cap

Air Cleaner

Starter

Grip

Oil Fill Cap

Oil Drain

 

Muffler

Spark Plug

 

Figure 9-1: The major components of the engine.

IMPORTANT: This engine is shipped

Read this section before starting your lawn mower engine. Compare the illustration in Figure 9-1 with your lawn mower engine to familiarize yourself with the location of various controls and adjustments.

without gasoline or oil in the engine. Running the engine with insuf- ficient oil can cause serious engine damage and void the engine warranty.

IMPORTANT: Using non- detergent oil or 2- stroke engine oil could shorten the engine’s service life.

Be sure to check the engine on a level surface with the engine stopped.

Pre-Operation Check

Oil Recommendations

IMPORTANT: This engine is shipped without gaso- line or oil in the engine. Running the engine with insufficient oil can cause serious engine damage and void the engine warranty.

•Before starting engine, fill with oil. Do not over-fill. Oil capacity is about 20 oz.

Use a 4-stroke, or an equivalent high detergent, premium quality motor oil certified to meet or exceed U.S. automobile manufacturer’s requirements for service classification SG, SF. Motor oils classified SG, SF will show this designation on the container.

SAE 10W-30 is recommended for general, all tem- perature use. If single viscosity oil is used, select the appropriate viscosity for the average temperature in your area from the chart to the right.

10w

20w

1

20

30

40

20w40, 20w50

15w40, 15w50

210w40

10w30

(ºC) -30º

-20º

-10º 0º

10º

20º

30º 40º

(ºF) -20º

0º

20º

40º 60º

80º

100º

 

Ambient Temperature

 

1.Single Viscosity

2.Multi Viscosity

IMPORTANT: Using non detergent oil or 2-stroke engine oil could shorten the engine’s service life.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Inch Self Propelled Rotary Lawn Mower Model 18M 2007Table of Contents Finding and Recording Model NumberCustomer Support Slope Gauge Children General OperationYour Responsibility Service Slope OperationBrackets Upper and lower handlesCrimp cable while lifting the handle up Carriage bolt is seated properly in the handleAttach center top of bag from inside of bag Setup AdjustmentAdjustments Never operate mowerOperating Your Lawn Mower Know Your Lawn MowerUsing the Grass Catcher Using Your Lawn MowerUsing as a Mulcher Starting EngineMaintaining Your Lawn Mower Blade Care Belt CareSonal injury Off-Season Storage Remove belt from transmission and engine pulleyPage Trouble Shooting Problem Cause RemedySafety Labels Do not remove safety or any labels from mower for any reasonCm below lowest portion of neck to allow for fuel expansion Do not choke carburetor to stop engineRunning engine produces Safety Label LocationInternational Symbols and Meanings Grass, brush, etc., can Catch fireKnow Your Engine Ambient TemperatureOperating Your Engine Pre-Operation CheckStarting The Engine Check Oil LevelCheck Fuel Level Stopping The EngineMaintenance Schedule Maintaining YourMaintaining Your Engine Air Cleaner ServiceSpark Plug Service Never use gasolineStorage Clean EngineAccumulation Removing From StoragePage Model 18M Or visit Parts ListTo order replacement DescriptionEngine 1P70FUA Illustrated Parts List Page Page MANUFACTURER’S Warranty Coverage EPA-1 MANUFACTURER’S Limited Warranty for

18M specifications

The Cub Cadet 18M is a dynamic and efficient lawn mower designed for homeowners seeking both performance and durability. As part of the Cub Cadet family, this model combines advanced technology with user-friendly features to create an exceptional mowing experience.

One of the standout characteristics of the Cub Cadet 18M is its powerful engine. Equipped with a robust and reliable engine, it provides consistent performance while tackling various grass types. This engine is designed to deliver high torque and efficiency, ensuring optimal cutting power even in thick or uneven lawns.

The cutting deck of the Cub Cadet 18M is another vital feature. Its wide cutting width allows for a faster mowing experience, reducing the time spent on the lawn without compromising on quality. The deck is also designed for easy height adjustment, enabling users to select their preferred grass length. This adaptability is especially useful for homeowners maintaining diverse landscaping with different grass heights.

For convenience, the Cub Cadet 18M boasts a user-friendly control panel. This panel allows for smooth operation with easily accessible controls that enhance the overall mowing experience. The ergonomic design ensures comfort during extended use, reducing fatigue and improving efficiency.

In terms of technology, the Cub Cadet 18M incorporates advanced cutting technologies that enhance its performance. The signature Triple-blade cutting system provides a precise and clean cut, promoting healthy lawn growth. The blades are designed for durability and easy maintenance, ensuring that users can keep their mower in peak condition with minimal effort.

The maneuverability of the Cub Cadet 18M is exemplary. Its compact design allows it to navigate through tight spaces and around obstacles with ease, making it ideal for residential lawns with landscaping features such as flower beds or trees.

Safety is a paramount concern with the Cub Cadet 18M, which includes features such as an automatic shut-off mechanism that activates when the operator releases the control handles. This built-in safety feature reduces the risk of accidents, providing peace of mind to users.

In summary, the Cub Cadet 18M is a well-rounded lawn mower that combines a powerful engine, versatile cutting capabilities, user-friendly features, and advanced technologies. Its emphasis on performance and safety makes it an excellent choice for homeowners seeking to maintain their lawns with efficiency and precision.
Top Page Image Contents