Cub Cadet 18M Upper and lower handles, Crimp cable while lifting the handle up, Brackets, Control

Page 6

3

Setup and

A

B

Adjustment

 

 

B

IMPORTANT: This unit is shipped without gasoline or oil in the engine. Fill up gasoline and oil as instructed in the accompanying engine manual BEFORE operat- ing your mower.

1. Remove any packing material which may be between

upper and lower handles.

a. Pull up and back on upper handle as shown in

Figure 3-1. Make certain the lower handle is seated

securely into the handle mounting brackets. Do not

crimp cable while lifting the handle up.

b. Tighten star knobs securing upper handle to lower

handle. See Figure 3-1. Make certain the lower

handle is seated securely into the handle mounting

brackets.

2. Tighten star knobs securing lower handle to handle

NOTE: Stand behind the mower as if you were going to operate it. Your right hand corresponds to the right side of the mower; your left hand corresponds to the left side of the mower.

NOTE: Your mower is shipped with the handle in the higher height position.

NOTE: Each end of the lower handle must be placed in the same relative position.

IMPORTANT This unit is shipped without gasoline or oil in the engine. Fill up gasoline and oil as instructed in the accompanying engine manual BEFORE

Figure 3-1: Unfold handle and tighten hardware.

Figure 3-2: Secure lower handle to mounting brackets.

A

B

brackets. See Figure 3-2. Make sure that each

carriage bolt is seated properly in the handle.

3. The rope guide is attached to the right side of the

upper handle. Loosen the wing nut which secures the

rope guide. See Figure 3-3.

a.

Hold blade control against upper handle.

b. Pull starter rope out of the engine. Release blade

 

control.

c.

Slip starter rope into rope guide.

d.

Tighten wing nut.

4. Insert post on cable ties into holes provided on the

lower handle. Pull cable tie tight and trim excess.

5. Follow steps below to assemble the grass catcher

(if needed). Make certain bag is turned right side

out before assembling (warning label will be on the

outside).

a.

Place bag over frame so that its black plastic side

 

is at the bottom.

b. Slip plastic channel of grass bag over hooks on the

 

frame. See Figure 3-4. All plastic channels except

 

center top of bag attach from outside of bag.

A

operating your mower.

C

D

C

B

Figure 3-3: Pull recoil starter through rope guide and tighten.

Figure 3-4: Assemble the grass catcher (if needed).

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Inch Self Propelled Rotary Lawn Mower Model 18M 2007Table of Contents Finding and Recording Model NumberCustomer Support Slope Gauge Children General OperationYour Responsibility Service Slope OperationBrackets Upper and lower handlesCrimp cable while lifting the handle up Carriage bolt is seated properly in the handleAttach center top of bag from inside of bag Setup AdjustmentAdjustments Never operate mowerOperating Your Lawn Mower Know Your Lawn MowerUsing the Grass Catcher Using Your Lawn MowerUsing as a Mulcher Starting EngineMaintaining Your Lawn Mower Blade Care Belt CareSonal injury Off-Season Storage Remove belt from transmission and engine pulleyPage Trouble Shooting Problem Cause RemedySafety Labels Do not remove safety or any labels from mower for any reasonCm below lowest portion of neck to allow for fuel expansion Do not choke carburetor to stop engineRunning engine produces Safety Label LocationInternational Symbols and Meanings Grass, brush, etc., can Catch fireKnow Your Engine Ambient TemperatureOperating Your Engine Pre-Operation CheckStarting The Engine Check Oil LevelCheck Fuel Level Stopping The EngineMaintenance Schedule Maintaining YourMaintaining Your Engine Air Cleaner ServiceSpark Plug Service Never use gasolineStorage Clean EngineAccumulation Removing From StoragePage Model 18M Or visit Parts ListTo order replacement DescriptionEngine 1P70FUA Illustrated Parts List Page Page MANUFACTURER’S Warranty Coverage EPA-1 MANUFACTURER’S Limited Warranty for

18M specifications

The Cub Cadet 18M is a dynamic and efficient lawn mower designed for homeowners seeking both performance and durability. As part of the Cub Cadet family, this model combines advanced technology with user-friendly features to create an exceptional mowing experience.

One of the standout characteristics of the Cub Cadet 18M is its powerful engine. Equipped with a robust and reliable engine, it provides consistent performance while tackling various grass types. This engine is designed to deliver high torque and efficiency, ensuring optimal cutting power even in thick or uneven lawns.

The cutting deck of the Cub Cadet 18M is another vital feature. Its wide cutting width allows for a faster mowing experience, reducing the time spent on the lawn without compromising on quality. The deck is also designed for easy height adjustment, enabling users to select their preferred grass length. This adaptability is especially useful for homeowners maintaining diverse landscaping with different grass heights.

For convenience, the Cub Cadet 18M boasts a user-friendly control panel. This panel allows for smooth operation with easily accessible controls that enhance the overall mowing experience. The ergonomic design ensures comfort during extended use, reducing fatigue and improving efficiency.

In terms of technology, the Cub Cadet 18M incorporates advanced cutting technologies that enhance its performance. The signature Triple-blade cutting system provides a precise and clean cut, promoting healthy lawn growth. The blades are designed for durability and easy maintenance, ensuring that users can keep their mower in peak condition with minimal effort.

The maneuverability of the Cub Cadet 18M is exemplary. Its compact design allows it to navigate through tight spaces and around obstacles with ease, making it ideal for residential lawns with landscaping features such as flower beds or trees.

Safety is a paramount concern with the Cub Cadet 18M, which includes features such as an automatic shut-off mechanism that activates when the operator releases the control handles. This built-in safety feature reduces the risk of accidents, providing peace of mind to users.

In summary, the Cub Cadet 18M is a well-rounded lawn mower that combines a powerful engine, versatile cutting capabilities, user-friendly features, and advanced technologies. Its emphasis on performance and safety makes it an excellent choice for homeowners seeking to maintain their lawns with efficiency and precision.
Top Page Image Contents