Cub Cadet 18M warranty Maintaining Your, Maintenance Schedule

Page 20

10

Maintaining

Your

WARNING: Shut off the engine before performing any maintenance. To prevent accidental start-up, disconnect the spark plug boot.

IMPORTANT: If engine must be tipped to transport equipment or to inspect or remove grass, keep spark plug side of engine up. Transporting or tipping engine spark plug down may cause smoking, hard starting, spark plug fouling, or oil saturation of air cleaner.

Periodic inspection and adjustment of the engine is essential if high level performance is to be maintained. Regular maintenance will also ensure a long service life. The required service intervals and the kind of mainte- nance to be performed are described in the table below. Follow the hourly or calendar intervals, whichever occur first. More frequent service is required when operating in adverse conditions.

Engine

WARNING

Shut off the engine

before performing any type of maintenance. To prevent accidental start-up, disconnect the spark plug boot.

Before tipping engine

or equipment to

Maintenance Schedule

Tasks

First 5 hours

Each use or

Every season

Every season

Every season

Service Dates

 

every 5 hours

or 25 hours

or 50 hours

or 100 hours

 

 

 

 

 

 

 

 

 

 

 

Check Engine

 

 

 

 

 

 

Oil

 

 

 

 

 

 

Change Engine

 

 

 

 

 

 

Oil

 

 

 

 

 

 

 

 

 

 

 

 

 

Check Air

 

 

 

 

 

 

Cleaner

 

 

 

 

 

 

 

 

 

 

 

 

 

Service Air

 

 

 

 

 

 

Cleaner

 

 

 

 

 

 

 

 

 

 

 

 

 

Check Spark

 

 

 

 

 

 

Plug

 

 

 

 

 

 

 

 

 

 

 

 

 

Service Spark

 

 

 

 

 

 

Plug

 

 

 

 

 

 

 

 

 

 

 

 

 

Clean Finger

 

 

 

 

 

 

Guard

 

 

 

 

 

 

 

 

 

 

 

 

 

Clean Around

 

 

 

 

 

 

Muffler

 

 

 

 

 

 

 

 

 

 

 

 

 

† Service more frequently when used in dusty areas.

†† If operating under heavy load or high ambient temperature.

drain oil, drain fuel

from tank by running engine until fuel tank is empty.

IMPORTANT: Be sure to check engine on a level surface with the engine stopped. Drain the oil while the engine is still warm to assure rapid and complete draining.

Oil Fill Cap

Drain

Level

Plug

 

Figure 10-1: Changing the oil.

Oil Service

•Check oil level regularly.

•Be sure correct oil level is maintained. Check every five hours or daily before starting engine. See oil checking procedure in the Operation section.

Oil Change

IMPORTANT: Be sure to check engine on a level surface with the engine stopped. Drain the oil while the engine is still warm to assure rapid and complete draining.

1.Remove oil fill cap and drain oil by either removing drain plug or turning mower on its side (air cleaner side up) and allowing oil to drain into a suitable container. See Figure 10-1.

WARNING: Before tipping engine or equipment to drain oil, drain fuel from tank by running engine until fuel tank is empty.

2.Reinstall the drain plug (if removed), and tighten it securely.

3.Refill with the recommended oil (see Operation section) and check the oil level. See Figure 10-1.

4.Reinstall the oil fill cap securely.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Inch Self Propelled Rotary Lawn Mower Model 18M 2007Customer Support Table of ContentsFinding and Recording Model Number Slope Gauge Your Responsibility ChildrenGeneral Operation Service Slope OperationUpper and lower handles Crimp cable while lifting the handle upBrackets Carriage bolt is seated properly in the handleSetup Adjustment AdjustmentsAttach center top of bag from inside of bag Never operate mowerOperating Your Lawn Mower Know Your Lawn MowerUsing Your Lawn Mower Using as a MulcherUsing the Grass Catcher Starting EngineMaintaining Your Lawn Mower Sonal injury Blade CareBelt Care Off-Season Storage Remove belt from transmission and engine pulleyPage Trouble Shooting Problem Cause RemedySafety Labels Do not remove safety or any labels from mower for any reasonCm below lowest portion of neck to allow for fuel expansion Do not choke carburetor to stop engineSafety Label Location International Symbols and MeaningsRunning engine produces Grass, brush, etc., can Catch fireAmbient Temperature Operating Your EngineKnow Your Engine Pre-Operation CheckCheck Oil Level Check Fuel LevelStarting The Engine Stopping The EngineMaintenance Schedule Maintaining YourAir Cleaner Service Spark Plug ServiceMaintaining Your Engine Never use gasolineClean Engine AccumulationStorage Removing From StoragePage Model 18M Parts List To order replacementOr visit DescriptionEngine 1P70FUA Illustrated Parts List Page Page MANUFACTURER’S Warranty Coverage EPA-1 MANUFACTURER’S Limited Warranty for

18M specifications

The Cub Cadet 18M is a dynamic and efficient lawn mower designed for homeowners seeking both performance and durability. As part of the Cub Cadet family, this model combines advanced technology with user-friendly features to create an exceptional mowing experience.

One of the standout characteristics of the Cub Cadet 18M is its powerful engine. Equipped with a robust and reliable engine, it provides consistent performance while tackling various grass types. This engine is designed to deliver high torque and efficiency, ensuring optimal cutting power even in thick or uneven lawns.

The cutting deck of the Cub Cadet 18M is another vital feature. Its wide cutting width allows for a faster mowing experience, reducing the time spent on the lawn without compromising on quality. The deck is also designed for easy height adjustment, enabling users to select their preferred grass length. This adaptability is especially useful for homeowners maintaining diverse landscaping with different grass heights.

For convenience, the Cub Cadet 18M boasts a user-friendly control panel. This panel allows for smooth operation with easily accessible controls that enhance the overall mowing experience. The ergonomic design ensures comfort during extended use, reducing fatigue and improving efficiency.

In terms of technology, the Cub Cadet 18M incorporates advanced cutting technologies that enhance its performance. The signature Triple-blade cutting system provides a precise and clean cut, promoting healthy lawn growth. The blades are designed for durability and easy maintenance, ensuring that users can keep their mower in peak condition with minimal effort.

The maneuverability of the Cub Cadet 18M is exemplary. Its compact design allows it to navigate through tight spaces and around obstacles with ease, making it ideal for residential lawns with landscaping features such as flower beds or trees.

Safety is a paramount concern with the Cub Cadet 18M, which includes features such as an automatic shut-off mechanism that activates when the operator releases the control handles. This built-in safety feature reduces the risk of accidents, providing peace of mind to users.

In summary, the Cub Cadet 18M is a well-rounded lawn mower that combines a powerful engine, versatile cutting capabilities, user-friendly features, and advanced technologies. Its emphasis on performance and safety makes it an excellent choice for homeowners seeking to maintain their lawns with efficiency and precision.
Top Page Image Contents