Cub Cadet 60 warranty Practices, Your Responsibility Restrict the use

Page 4

2

Safe

Operation

WARNING: Engine Exhaust, some of its constituents, and certain vehicle compo- nents contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm.

DANGER: This machine was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

TrainingPreparation

Practices

WARNING

This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before at- tempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol.

HEED ITS WARNING!

Your Responsibility Restrict the use

of this power machine to persons who read, understand

and follow the warnings and instructions

in this manual

and on the machine.

1.Read, understand, and follow all instructions on the ma- chine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

2.Be familiar with all controls and their proper operation. Know how to stop the machine and disengage them quickly.

3.Never allow children under 16 years old to operate this machine. Children 16 years old and over should read and understand the operation instructions and safety rules in this manual and should be trained and supervised by a parent.

4.Never allow adults to operate this machine without proper instruction.

5.Keep bystanders, helpers, pets, and children at least

75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

6.Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

7.Do not put hands and feet near rotating parts or in the feeding chambers and discharge opening. Contact with the rotating impeller can amputate fingers, hands, and feet.

8.Never attempt to unclog either the feed intake or dis- charge opening, remove or empty vacuum bag, or inspect and repair the machine while the engine is running. Shut the engine off and wait until all moving parts have come to a complete stop. Disconnect the spark plug wire and ground it against the engine.

1.Thoroughly inspect the area where the equipment is to be used. Remove all rocks, bottles, cans, or other foreign objects which could be picked up or thrown and cause personal injury or damage to the machine.

2.Always wear safety glasses or safety goggles during opera- tion or while performing an adjustment or repair, to protect eyes. Thrown objects which ricochet can cause serious injury to the eyes.

3.Wear sturdy, rough-soled work shoes and close-fitting slacks and shirts. Loose fitting clothes or jewelry can be caught in movable parts. Never operate this machine in bare feet or sandals. Wear leather work gloves when feeding material in the chipper chute.

4.Before starting, check all bolts and screws for proper tight- ness to be sure the machine is in safe working condition. Also, visually inspect machine for any damage at frequent intervals.

5.Maintain or replace safety and instructions labels, as necessary.

6.To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes which can ignite. Wash your skin and change clothes immediately.

a.Use only an approved gasoline container.

b.Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

c.Never fuel machine indoors.

d.Never remove gas cap or add fuel while the engine is hot or running.

e.Allow engine to cool at least two minutes before refuel- ing.

f.Never over fill fuel tank. Fill tank to no more than 1/2 inch below bottom of filler neck to provide space for fuel expansion.

g.Replace gasoline cap and tighten securely.

h.If gasoline is spilled, wipe it off the engine and equip- ment. Move machine to another area. Wait 5 minutes before starting the engine.

i.Never store the machine or fuel container inside where there is an open flame, spark, or pilot light (e.g. furnace, water heater, space heater, clothes dryer, etc.).

j.To reduce a fire hazard, keep machine free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage and remove any fuel soaked debris.

k.Allow machine to cool at least 5 minutes before storing.

Image 4
Contents Yard Vacuum/Chipper/Shredder with Vacuum/Hose Model Series 12/2007Finding and Recording Model Number Table of ContentsCustomer Support Safety Labels Found On Your Chipper Shredder Vacuum To Avoid Serious InjuryPractices Your Responsibility Restrict the useDo not modify engine Your ResponsibilityLoose Parts In Carton Setting Up Your Chipper Shredder VacuumAttaching The Handle Attaching The Hose Assembly Attaching The BagHose Assembly Any adjustments or repairsNozzle Height Adjustment Lever Nozzle/ Hose Vac LeverOperating Your Chipper Shredder Vacuum Gas and Oil Fill-UpStarting Engine Stopping EngineWire Using The Nozzle VacuumTo Empty Bag Nozzle Height Adjustment Using The Hose AssemblyRelease lever towards deck Maintaining Your Chipper Shredder Vacuum General RecommendationsLubrication Equipment CareRemoving the Flail Screen Disconnect and ground the spark plug wire to retaining post Sharpening or Replacing Chipper BladeOff Season Storage Problem Cause Remedy Page Model Series To order replacement Or visitDescription 736-031413 B 22 a Safety Glasses Not Shown 40 -0962 Compression Spring 41 -0778A Mounting BracketCUB Cadet LLC MANUFACTURER’S Limited Warranty for Chipper-shredders & Chipper-shredder VACUUMsManual DEL Operador Aspiradora Para Patios Modelo SerieÍndice Búsqueda y registro del número de modeloAsistencia al Cliente BOXEtiquetas Seguridad Prácticas de ResponsabilidadAviso referido a emisiones No modifique el motorSu responsabilidad Configuración De la Aspiradora Para Patios Piezas Sueltas Dentro de la CajaMontaje de la Manija Vea la figuraMontaje de la Bolsa Instalación Del Montaje de la MangueraSuelte el perno para ajustar la manguera en su lugar Funciona Miento De la Aspiradora Para Patios Llenado de Gasolina y Aceite Para Encender El MotorPara Detener El Motor Mandos de MotorUso Del Pico De La Aspiradora Descarga de la BolsaDaños a la máquina Uso Del Montaje De La Manguera Ajuste De La Altura Del PicoRecomendaciones Generales LubricaciònCare de Equipo Care de MotorExtracciòn de la Pantalla de Desgranado Afilado o Reemplazo de Las Hojas de la Cortadora Retire el montaje de la bolsaAlmacenamiento Fuera de Tempo- rada Causa Remedio Problema Causa Remedio Garantía Limitada DE CUB Cadet LLC
Related manuals
Manual 4 pages 33.25 Kb

60 specifications

Cub Cadet has long been a name synonymous with quality and reliability in outdoor power equipment. Among its impressive lineup are the M48, M72, M54, 48, and 60 models, each designed to provide efficient and effective lawn maintenance solutions for both residential and commercial users. These zero-turn mowers embody advanced technology and engineering excellence that cater to the diverse needs of landscapers and homeowners alike.

The M48 model is compact yet powerful, featuring a 48-inch cutting deck that allows for agile maneuvering in tight spaces. It is powered by a robust engine designed for durability and longevity, ensuring that users can tackle their mowing tasks with ease. The M72, on the other hand, elevates performance with a 72-inch cutting deck, making it ideal for larger properties and commercial applications. Both models are equipped with a hydrostatic transmission, delivering smooth acceleration and precise control while reducing the fatigue often associated with extended mowing sessions.

Cub Cadet's 48 and 60 models focus on providing versatility and performance. The 48-inch deck allows for a perfect balance between speed and accuracy, making it suitable for various terrains. Meanwhile, the M60 model enhances productivity with its 60-inch cutting deck, optimized for efficiency without compromising on quality. These mowers are engineered with cutting-edge technology, including Cub Cadet's signature SmartJet technology, which ensures superior grass cutting and a cleaner, healthier lawn.

All models in this series are equipped with a comfortable operator platform, ensuring ease of operation over long periods. Ergonomically designed seats provide excellent support and minimize user fatigue, contributing to a more enjoyable mowing experience. In addition, the user-friendly control panel and intuitive steering levers allow for quick adjustments and enhanced maneuverability.

Durability is a hallmark of Cub Cadet mowers. Constructed with heavy-duty materials, these machines are engineered to withstand the rigors of regular use while providing outstanding performance. Moreover, select models come with advanced features such as LED headlights for improved visibility during early morning or late evening mowing sessions.

Additionally, the models benefit from a robust warranty program, reflecting Cub Cadet's commitment to customer satisfaction and product reliability. Whether you're a weekend warrior caring for your lawn or a professional landscaper managing extensive properties, Cub Cadet's M48, M72, M54, 48, and 60 mowers deliver the power, performance, and comfort that users expect from a leading brand in outdoor equipment. With these innovative machines, maintaining a pristine lawn has never been easier or more efficient.