Graco 249065, 2525LD, 2626LD, 246601 important safety instructions Fuel Hazard

Page 3

FUEL HAZARD:

Fuel is combustible. When spilled on a hot surface it can ignite and cause a fire. Do not fill fuel tank while engine is running or hot.

EXHAUST HAZARD:

Exhaust contains poisonous carbon monoxide, which is colorless and odorless. Do not operate this equipment in a closed building.

EQUIPMENT MISUSE HAZARD:

Misuse of pressure washer or accessories can cause the equipment to rupture or malfunction and result in serious injury.

DDo not alter or modify any part or factory–setting

DCheck equipment daily. Repair or replace worn or damaged parts immediately.

DDo not exceed maximum working pressure (MWPR) of the lowest–rated system component

DUse fluids and solvents that are compatible with the equipment wetted parts. See Specifications page for this information.

DWear hearing protection when operating this equipment.

DDo not “blow back” fluid; this is not an air spray system

DFollow Pressure Relief, page 7 before cleaning, checking or servicing equipment.

TOXIC FLUID HAZARD:

Hazardous fluid or toxi fumes can cause serious injury or death if splashed in eyes or on skin, inhaled, or swallowed.

DKnow specific hazards of fluids you are using and take protective measures as recommended by the fluid and solvent manufacturer.

SKIN INJECTION HAZARD:

Spray from gun, leaks or ruptured components can inject fluid into your body and cause serious injury. Fluid splashed in eyes or on skin can also cause serious injury.

DFluid injected into skin might look like just a cut, but it is a serious injury. Get immediate surgical treatment.

DDo not point gun at anyone or any part of the body.

DDo not stop or deflect leaks with hand, body, glove, or rag.

DDo not put your hand or fingers over the spray tip.

DTIghten fluid connections before you start this equipment.

DEngage the gun safety whenever you stop spraying.

DFollow Pressure Relief Procedure, page 7 if the spray tip clogs and before you clean, check or service this equipment.

DRepair or replace worn or damaged parts immediately.

DCheck hoses, tubes, and couplings daily. Do not repair high–pressure couplings. Replace entire hose. Fluid hoses must have spring guards on both ends to prevent kinks and rupture.

309828 3

Image 3
Contents 2626LD 2525LDTable of Contents Fuel Hazard Component Identification Fuel Initial SetupShipping Damage OilConnect to Water Supply InstallationInstall Spray Tip Connect High-Pressure Hose and GunPressure Relief Operation For Model 2525LD only , move Safety on Safety OFF Chemical Injector Operation Follow Pressure Relief Procedure,Perform Pressure Relief Procedure, Installing and Changing Spray TipsShutdown, Flushing, and Storage Ti3231a Long Term more than 30 days/Winter Storage PumpStorage Location Perform Pressure Relief Procedure Interval What to do Maintenance ChartPerform Pressure Relief Procedure Problem Cause Solution TroubleshootingProblem Cause Solution PrematurelyChanging Spray Tips Servicing Valves Pump ServicePackings Model 2525LD PartsPart Description Qty Model 2525LD Part Description QtyRepair Kits SJV2.5G25D-F7SJV2.5G25D-F7 Repair Kits Model 2626LD Model 2626LD Part Description Qty SJV2.5G27-D2105 Repair Kits SJV2.5G27-D105Technical Data Model 2525LDModel 2626LD Toll Free Graco Standard Warranty