| Symptom | Cause | Solution | 
| 
 | 
 | 
 | 
| No detergent. | Detergent suction tube not | Check connection. | 
| 
 | properly connected to the | 
 | 
| 
 | machine. | 
 | 
| 
 | Detergent is too thick. | Dilute detergent, for best re- | 
| 
 | 
 | sults use Kärcher® detergent. | 
| 
 | Filter on detergent suction | Run warm water through filter | 
| 
 | tube is clogged. | to remove debris. | 
| 
 | Damaged or clogged deter- | Remove obstruction or replace | 
| 
 | gent suction tube. | detergent suction tube. | 
| 
 | Spray wand is in high pres- | Turn spray wand tip to low | 
| 
 | sure position. | pressure position. | 
| 
 | Discharge nozzle is obstruct- | Blow out or remove debris with | 
| 
 | ed. | fine needle. | 
| Garden hose con- | Loose fittings. | Tighten fittings. | 
| nection leaks. | 
 | 
 | 
| Missing/worn rubber washer. | Insert new washer. | |
| Spray wand leaks. | Spray wand not properly at- | Insert the spray wand into the | 
| 
 | tached. | trigger gun. Carefully press in | 
| 
 | 
 | against the spring tension and | 
| 
 | 
 | twist into the locked position. | 
| 
 | Broken  | Call Customer Support | 
| 
 | sert. | 
 | 
| Pump is noisy. | Pump is sucking air. | Check that hoses and fittings | 
| 
 | 
 | are air tight. Turn off machine | 
| 
 | 
 | and purge pump by squeezing | 
| 
 | 
 | trigger gun until a steady flow of | 
| 
 | 
 | water emerges through the | 
| 
 | 
 | nozzle. | 
| Water leaks from | Loose fittings. | Check that all fittings are tight. | 
| pump (up to 10 | 
 | 
 | 
| Water seals are damaged or | Call Customer Support | |
| drops per minute is | worn. | 
 | 
| permissible). | 
 | 
 | 
| Oil Drip. | Oil seals are damaged or | Call Customer Support | 
| 
 | worn. | 
 | 
| Customer Support | 
 | Customer Support | 
| USA and Canada | 
 | Mexico | 
| Call:  | 
 | Call:  | 
| our website: | 
 | our website: www.karcher.com.mx | 
| www.karcherresidential.com | 
 | 
 | 
English 17