ÎSTEP 2:
Insert the spray wand of your choice into the trigger gun. Press in against the spring tension and twist into locked position.
Î STEP 3: |
Connect garden hose to unit’s water inlet.
Î STEP 4: |
Connect garden hose to the cold wa- ter source and turn water on com- pletely.
Î STEP 5: |
Plug the Ground Fault Circuit Inter- rupter (GFCI) into a receptacle. Press RESET button, indicator should be “ON”.
Press TEST button, indicator should be “OFF”.
Press RESET button for use.
WARNING
Do not use if above test fails.
ÎSTEP 6:
Unlock the trigger gun safety lock. Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.
ÎSTEP 7:
Turn on the high pressure washer (I/ ON).
The motor starts only if the trigger of the gun is pulled and shuts off when the trigger is released.
English 7