OPERATING INSTRUCTIONS
This pressure washer has been tested by Kärcher's quality assurance team. A small amount of water may be present in the water inlet or outlet. This is nor- mal and will not affect the performance of the pressure washer.
STEP 1:
Insert the spray wand of your choice into the trigger gun. Press in against the spring tension and twist into locked position.
STEP 2: |
Insert the high pressure hose tightly into the quick coupling on the appli- ance, it will lock in audibly.
Note: Make sure the connection nipple is aligned correctly. Check the secure connection by pulling on the high pressure hose.
STEP 3:
Install the supplied connector to the unit’s water inlet.
Note: Never attach the garden hose connector to the unit’s water inlet!
STEP 4: |
Screw the supplied garden hose connector on to the end of your gar- den hose. Push the garden hose connector on to the water inlet con- nector and make sure you hear it click into place before proceeding.
Disconnect:
Push the casing of the quick cou- pling for the high pressure hose to- ward the rear and disconnect the high pressure hose from the appli- ance.
English 9