Craftsman D2415, 919.670281 owner manual Assembly, Parts Bag Contents

Page 5

 

 

 

HAZARD

WHAT CAN HAPPEN

HOW TO PREVENT IT

 

 

 

 

 

 

 

• Fuel or oil can leak or spill and could

• If pressure washer is equipped with a fuel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

result in fire or breathing hazard, serious

shut-off valve, turn the valve to the off position

 

 

RISK OF INJURY AND

injury or death can result. Fuel or oil leaks

before transporting to avoid fuel leaks. If pres-

 

 

PROPERTY DAMAGE

will damage carpet, paint or other

sure washer is not equipped with a fuel shut-

 

 

surfaces in vehicles or trailers.

off valve, drain the fuel from tank before trans-

 

WHEN TRANSPORTING OR

 

 

porting. Only transport fuel in an OSHA

 

 

 

 

STORING

 

 

 

 

 

 

approved container. Always place pressure

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

washer on a protective mat when transporting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to protect against damage to vehicle from

 

 

 

 

 

 

 

 

leaks. Remove pressure washer from vehicle

 

 

 

 

 

 

 

 

immediately upon arrival at your destination.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The powerful spray from your pressure washer is capable of causing damage to surfaces such as wood, glass, automobile paint, auto striping and trim, and delicate objects such as flowers and

shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray. Avoid the use of the concentrated spray stream except for very strong surfaces like concrete and steel.

Operating without flow of water will result in equipment damage. Operating the pressure washer with water supply shutoff will void your warranty. You should never run this pressure washer for more than 2 minutes without pulling the trigger to allow cool water to enter the pump and the heated (recirculated) water to exit.

ASSEMBLY

Carton Contents

•Main Unit pressure washer with wheels

•Handle

•High Pressure Hose

Parts Bag Contents

•Chemical Pickup Hose and Filter

•Gun

•Wand

Main Unit Pressure

Handle

High Pressure Hose

Washer with Wheels

 

 

Gun and Wand

Chemical Pickup Hose and Filter

Bag Containing

•Video Cassette

•Owner’s Manual

•Nozzle Cleaning Kit

•2 mm Allen Wrench

•5 mm Allen Wrench Replacement O-Rings

•Engine Oil

•Rubber Isolator and Mounting Hardware

•Handle Mounting Hardware

Video Cassette

Owner’s Manual

Nozzle Cleaning Kit

Replacement O-Rings

2 mm Allen Wrench 5 mm Allen Wrench

Engine Oil

Rubber Isolator and

Mounting Hardware Handle Mounting

Hardware

5 - ENG

D24150

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Sold by Sears Canada, Inc., Toronto, Ont. M5B2B8 Horsepower PSI 2.4 GPM High Pressure WasherTable of Contents Important Safety Instructions Safety Guidelines DefinitionsRisk of Unsafe Operation Parts Bag Contents AssemblyAdjustable wrench Mm Allen wrench supplied Tools Required for AssemblyRemove Pressure Washer from Carton Preparing the Pressure Washer for First UseOperation ChecklistKnow Your High Pressure Washer Recoil STARTER- Used for starting the engineBefore Starting The Engine Stopping Your Pressure WasherEngine Oil GasolineTo Start Your Pressure Washer How To Use Your Pressure Washer Adjusting Chemical Flow Adjusting Fan SprayProduct Specifications MaintenancePressure Washer Specifications Engine SpecificationsEngine Maintenance Check Oil Level Pressure Washer MaintenancePump Maintenance Changing Pump Oil Purge Pump of Air and ContaminantsClean and Replace Spark Plug Clean Pre-Cleaner and Air Cleaner CartridgeChanging Engine Oil Check Engine Finger Guard/MufflerCarburetor Service and AdjustmentsNozzle Cleaning Preparing Pressure Washer for Storage StorageEngine Preparation Pump PreparationNo or low pressure Engine will not startInitial use Will not draw chemicalsPeriod of normal use No or low pressure afterWater leaking at gun/wand ConnectionSold By Sears Canada, Inc., Toronto, Ont. M5B 2B8 If calling locally, please use one of the following numbersVendu par Sears Canada, Inc., Toronto, Ont. M5B 2B8 Guide DE L’UTILISATEUREntretien Table DES MatièresFonctionnement Mesures DE Sécurité Importantes Mesures DE Sécurité DéfinitionsRisque DE Surfaces Contenu du sac AssemblageContenu de l’emballage Outils requis pour l’assemblage Bien connaître votre Génératrice FonctionnementListe de vérification Avant de démarrer le moteur Arrêt de l’appareil de lavage sous pressionHuile moteur Plus froid ----40F 4C---- plus chaud Synthétique 5W-30Démarrage de l’appareil de lavage sous pression Réglage du débit des produits chimiques Utilisation de l’appareil de lavage sous pressionRéglage du jet Utilisation de savons/produits chimiquesEntretien Recommandations généralesAvant Toutes les Chaque Heures ou Vérification du niveau d’huileEntretien du moteur Entretien de l’appareil de lavage sous pressionEntretien de la pompe changement de l’huile de la pompe Vérification du protecteur et du silencieux du moteur Nettoyage et remplacement de la bougie d’allumageChangement de l’huile moteur Nettoyage de la buse Entretien ET RéglagesCarburateur Préparation du moteur EntreposageAspiré Le moteur ne démarre pasAucune pression ou basse Fuite deau au niveau de la Dutilisation normaleConnexion du pistolet/lance PompeVendu par Sears Canada, Inc., Toronto, Ont. M5B 2B8 Guide DE L’UTILISATEUR

D2415, 919.670281 specifications

The Craftsman 919.670281, D2415 is a versatile and robust air compressor that is essential for both home and professional use. This model combines efficiency, reliability, and power, making it a popular choice among DIY enthusiasts and contractors alike.

One of the standout features of the Craftsman 919.670281 is its powerful motor. With a 1.5 horsepower motor, this air compressor can easily handle a variety of tasks, ranging from inflating tires to powering tools like nail guns and paint sprayers. Its high-performance capabilities ensure that it can keep up with the demands of various jobs, providing a steady air supply whenever needed.

The design of the Craftsman 919.670281 is notable for its portability. Equipped with a sturdy handle and compact footprint, this compressor can be easily transported from one location to another, whether you are working in your garage or on a construction site. The lightweight build also contributes to its user-friendliness, allowing operators to move it around without any hassle.

Another essential characteristic of this model is its oil-free pump design. This feature not only reduces maintenance but also enhances longevity, as it eliminates the need for regular oil changes. The oil-free operation leads to cleaner air output, making it a better option for applications that require a non-oiled air supply, such as spray painting or automotive work.

The Craftsman 919.670281 also boasts a 6-gallon tank capacity, enabling it to store ample air pressure for extended use. This tank size strikes a perfect balance, ensuring that sufficient air is available while still remaining portable. The quick recovery time allows users to get back to work without prolonged interruptions, making it efficient for time-sensitive tasks.

Additionally, the compressor is equipped with a user-friendly control panel, featuring easy-to-read gauges and a simple on/off switch. This intuitive setup enables users to monitor pressure levels and operate the unit with minimal effort, even for those who are new to air compressors.

In summary, the Craftsman 919.670281, D2415 is a dependable air compressor that combines powerful performance with user-friendly features. Its portability, oil-free pump design, and 6-gallon tank capacity make it ideal for a wide range of applications, solidifying its position as a crucial tool for both home improvement projects and professional work environments. Whether for inflating, nailing, or painting, this compressor delivers efficiency and reliability, making it a valuable addition to any toolkit.
Top Page Image Contents