Craftsman 580.75201 Check and Cean Jnet Screen, Check High Pressure Hose, NozzRe Maintenance

Page 14

Pressurewasherpartsshouldbekeptcleantoreducethe riskofoverheatingandignitionofaccumulateddebris.

CAUTION

• DO NOT insert any objects through cooling slots.

°Use a damp cloth to wipe exterior surfaces clean.

•Use a soft bristle brush to loosen caked on dirt, oil, etc.

•Use a vacuum cleaner to pick up loose dirt and debris.

•Use low pressure air (not to exceed 25 psi) to blow away dirt. inspect cooling air slots and openings on

the pressure washer. These openings must be kept clean and unobstructed.

Check and C_ean Jn_et Screen

Examine garden hose inlet screen. Clean if it is clogged or replace if it is torn.

Check High Pressure Hose

High pressure hoses can develop leaks from wear, kinking, or abuse, inspect hose before each use. Check for cuts, leaks, abrasions, bulging of cover, or damage or movement of couplings, if any of these conditions exist, replace hose immediately.

2.Place in-line filter screen into threaded end of nozzle extension. Direction does not matter. Push screen in with eraser end of pencil until it rests flat at bottom of opening. Take care not to bend screen.

3.Place o-ring into recess. Push o-ring snugly against in-line filter screen.

4.Assemble nozzle extension to spray gun, as described earlier in manual.

NozzRe Maintenance

A pulsing sensation felt while squeezing the spray gun trigger may be caused by excessive pump pressure. The principal cause of excessive pump pressure is a spray tip clogged or restricted with foreign materials, such as dirt, etc. To correct the problem, immediately clean the spray tip following these instructions:

1.Shut off engine and turn off water supply.

2.Remove spray tip from end of nozzle extension.

3.Remove in-line filter from other end of nozzle extension.

. Use a small paper clip to free any foreign material clogging or restricting spray tip.

1

•NEVER repair high pressure hose, Replace it,

•Replacement hose rating MUST exceed maximum pressure rating of unit.

Check Gun and Nozzle Extension

Examine hose connection to gun and make sure it is secure. Test trigger by pressing it and making sure it springs back into place when you release it. Engage trigger lock and test trigger. You should not be able to

press trigger. Replace gun immediately if it fails any of these tests.

Check in-Line Fi_ter

Refer to the illustration and service the in-line filter if it becomes clogged, as follows:

5.Using a garden hose, remove additional debris by

back flushing water through nozzle extension. Back flush between 30 to 60 seconds.

6.Reinstall spray tip and in-line filter into nozzle extension.

7.Reconnect nozzle extension to spray gun.

8.Reconnect water supply, turn on water, and start engine.

9.Test pressure washer by operating with each quick connect spray tips.

O-Ring Maintenance

Purchase an O-Ring Repair Kit at your local Sears or by caJJing1-800-366-PART or online at www.sears.com. Jtis not included with the pressure washer. This kit includes replacement o-rings, rubber washer and water inlet filter. Refer to the instruction sheet provided in the kit to service your unit'so-rings.

Nozzle extension

O-ring

Detach nozzle extension from gun and remove

o-dng and screen from nozzle extension. Flush screen, gun, and nozzle extension with clean water to clear debris.

WARNING

NEVER repair leaking connections with sealant of any

kind. Replace o-ring or sea!,

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Horsepower 2150 PSi GPM Model No PRECAUCtON Safety Assembly o Operation Maintenance o Parts EspaSoNSears, Roebuck and Co Hazard Symbols and MeaningsSears, Roebuck and Co., Dept WA, Hoffman Estates, IL Cancer, birth defects, or other reproductive harm WARNtNGWarn NG When Testing for Engine Spark Pressure WasherKnow Your Pressure Washer Assembling Your Pressure Washer Carton ContentsRemove Pressure Washer from Carton Checklist Before Starting Engine Connect Hose and Water Supply to PumpTo Start Your Pressure Washer HOW to USE Your Pressure WasherPressure Washer Location Pressure Washer ClearanceHow to Stop Your Pressure Washer How to Use Spray TipsHigh Pressure Cleaning and Applying ChemicalLow Pressure Black Use to apply chemicalTherma Relief Pressure Washer RinsingCeaning Detergent Siphoning Tube Pressure Washer Specifications Product SPECiFiCATiONSPower Ratings Engine SpecificationsEmission Control Owners RESPONSiBiLiTiESGeneral Recommendations Before Each USECheck and Cean Jnet Screen NozzRe MaintenanceRing Maintenance Check High Pressure HoseService Air Cleaner Engine MaintenancePump Maintenance Checking OH LeveAir Cooling System Service Spark PmugSpark Arrester Service Cean Combustion ChamberDo not light a cigarette or smoke After Each USEWinter Storage Change Oil Long Term StorageProtect Fuel System Oil Cylinder BoreProbem Correction192525GS KIT, Pump/Engine Mounting Hardware 196006GS Description196519GS 193482GSSeat Plate, Plastic 190630GS 29 190575GS O=RING, 4 X 30 190576GS Screw 190578GS190629GS 190632GS459 Engine 4.0 HP, Briggs and Stratton, 10D902 Exploded View51A 1211 456 597ENGINE, 4.0 HP, Briggs and Stratton 305 10D902 Exploded ViewENGINE, 4.0 HP, Briggs and Stratton, 10D902 Parts List Page Owners Warranty Responsibilities Purchased and Used Elsewhere in the UnitedEmissions Durability Period and Air index Information On Your Engine Emissions LabeSimboos de Peigro y Significados Sears, Roebuck and Co., Dept WA, Hoffman Estates, mL60179Cuando Transporte O Repare EL Equipo AdvertenciaUando Opere EL Equipo ADVERTENCiA PrecaucionConozca SU MAQUtNA Lavadora DE PRE$1ON Montaje DE LA Maquna Lavadora a Preson Retire LA Maquna Lavadora a Preson DE LA CajaContenido DE LA Caja Agregue Aceite de MotorCuando Anada Combustible Conecte la Manguera y el Suministro de Agua a la BombaLista de Revision Previa al Arranque del Motor Ubicaci6n del Lavadora a Presi6n C6MO Usar SU Maquina Lavadora a PresionPRECAUCI0N C6mo Dare Arranque a su M&quina Lavadora a Presi6nC6mo Usar las Puntas de Rocio PRECAUCtON1C6mo Detener su Mquina Lavadora a Presi6n Limpieza y Aplicaci6n de Quimico La Presi6n gajaLa Presi6n Ata ImportanteSistema de Enfriamiento Automtico Aivio Trmico Enjuage de a Mquina Lavadora a PresionLimpiando e Tubo ESPECIFtCACtONES INFORMAClON Tccnica Sobre ELMotor DEL ProductoControl DE Enisiones RESPONSABtLIDADES DEL PROPtETARIORECONENDACtONES Generales Antes DE Cada USORevise La Manguera De Alta Presi6n Revise Limpie Colador EntradaLa Boquilla Revise La Pistola La Extensi6n ParaMantenjmjento DEL Motor Sistema de Refrigeraci6n de Aire AdvertencjaProporcione Servicio a la Bujia Servicio de ApagachispasDespues DE Cada USO PrecaucionAlmacenamiento Prolongado OtrosFast Rapido ProbemaSouci6n Emisiones Page DomiciRio, y pars ordenar piezas U oHOGAR sM 18005336937Call anytime, day or night U.S.A. only

580.75201 specifications

The Craftsman 580.75201 is a versatile and powerful leaf blower designed to make yard work more efficient and effective. With its robust performance and user-friendly features, this model appeals to both homeowners and professional landscapers.

One of the standout characteristics of the Craftsman 580.75201 is its powerful engine. Equipped with a 27cc 2-cycle gas engine, this leaf blower offers excellent airflow and velocity, allowing you to tackle even the heaviest leaf piles and debris with ease. The impressive airspeed, reaching up to 200 miles per hour, ensures that leaves and debris are not just disturbed but blown away quickly and efficiently.

The design of the Craftsman 580.75201 emphasizes user comfort and control. It features an ergonomic handle, which reduces fatigue during prolonged use. The machine also includes a throttle control, giving users the ability to adjust speeds according to their specific needs. This adaptability makes it perfect for various tasks, from clearing grass clippings to moving heavier leaves.

In terms of technology, the Craftsman 580.75201 incorporates advanced start features that reduce starting effort. The easy-start system ensures a hassle-free ignition process, allowing users to get to work without the frustration of a stubborn engine. Additionally, its lightweight construction helps enhance maneuverability while reducing strain during operation.

Maintenance is simplified with this leaf blower, thanks to its accessible design. Easy access to the air filter and spark plug allows users to perform routine checks and replacements, extending the lifespan of the machine and ensuring optimal performance. Additionally, its fuel-efficient engine helps users save on fuel costs while minimizing environmental impact.

Noise reduction technology is another notable feature. The Craftsman 580.75201 operates at a lower decibel level compared to many traditional gas leaf blowers, allowing users to work without causing significant disturbance to neighbors or local wildlife.

Overall, the Craftsman 580.75201 stands out as a reliable and efficient leaf blower. Its powerful engine, user-friendly design, and innovative features make it an excellent tool for seasonal yard maintenance, ensuring that cleaning up leaves and debris can be done quickly and effectively. Whether for residential tasks or professional landscaping duties, this leaf blower proves to be a valuable addition to any outdoor toolkit.
Top Page Image Contents