Craftsman 580.75201 Long Term Storage, Protect Fuel System, Change Oil, Oil Cylinder Bore

Page 18

LONG TERM STORAGE

if you do not plan to use the pressure washer for more than 30 days, you must prepare the engine and pump for long term storage.

it is important to prevent gum deposits from forming in essential fuel system parts such as the carburetor, fuel filter, fuel hose or tank during storage. Also, experience indicates that alcohol-blended fuels (called gasohol, ethanol or methanol) can attract moisture, which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

Protect Fuel System

Fuel Additive:

if adding a fuel additive, fill the fuel tank with fresh fuel. If only partially filled, air in the tank will promote fuel deterioration during storage. Engine and fue[ can be stored up to 24 months with additive.

•Add fue[ additive following manufacturer's instructions.

•Make sure you have water supply to pump inlet connected and turned ON.

•Run the engine outdoors for 10 minutes to be sure that treated fuel has replaced the untreated fuel in the carburetor.

If fuel additive is not used, remove all fuel from tank and run engine until it stops from lack of fuel.

Change Oil

While engine is still warm, drain oil from crankcase. Refill with recommended grade. See "Changing Oil" on page 15.

Oil Cylinder Bore

•Remove spark plug. Squirt about 1/2 oz. of clean engine oil into the cylinder. Cover spark plug hole with rag. Pui[ recoil handle slowly to distribute oil. Avoid spray from spark plug hole.

•Instal[ spark plug. DO NOT connect spark plug wire.

Protect Pump

To protect the pump use Sears pump saver to prevent freeze damage and lubricate pistons and seals.

CAUTION

•Failure to do so will permanently damage your pump and render your unit inoperable,

•Freeze damage is not covered under warranty.

NOTE: Sears pump saver, item number 71-74403, is available as an optional accessory. It is not included with the pressure washer.

,_ CAUTION

Always wear eye protection when using PumpSaver.

To use the pump saver:

1.Attach hose on pump saver can to pump inlet.

2.Push in can top to dispense pump saver.

3.When pump saver fluid begins to exit pump outlet, the pump is protected.

4.Remove pump saver from pump inlet.

OTHER

•DO NOT store fuel from one season to another.

•if possible, store your unit indoors and cover it to give protection from dust and dirt. BE SURE TO EMPTY THE FUEL TANK.

WARNING

DO NOT place a storage cover over a hot pressure washer,

Let equipment coo! for a sufficient time before placing the cover on the equipment.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Horsepower 2150 PSi GPM Model No PRECAUCtON Safety Assembly o Operation Maintenance o Parts EspaSoNHazard Symbols and Meanings Sears, Roebuck and Co., Dept WA, Hoffman Estates, ILSears, Roebuck and Co WARNtNG Warn NGCancer, birth defects, or other reproductive harm When Testing for Engine Spark Pressure WasherKnow Your Pressure Washer Carton Contents Remove Pressure Washer from CartonAssembling Your Pressure Washer Checklist Before Starting Engine Connect Hose and Water Supply to PumpTo Start Your Pressure Washer HOW to USE Your Pressure WasherPressure Washer Location Pressure Washer ClearanceHow to Stop Your Pressure Washer How to Use Spray TipsHigh Pressure Cleaning and Applying ChemicalLow Pressure Black Use to apply chemicalPressure Washer Rinsing Ceaning Detergent Siphoning TubeTherma Relief Pressure Washer Specifications Product SPECiFiCATiONSPower Ratings Engine SpecificationsEmission Control Owners RESPONSiBiLiTiESGeneral Recommendations Before Each USECheck and Cean Jnet Screen NozzRe MaintenanceRing Maintenance Check High Pressure HoseService Air Cleaner Engine MaintenancePump Maintenance Checking OH LeveAir Cooling System Service Spark PmugSpark Arrester Service Cean Combustion ChamberAfter Each USE Winter StorageDo not light a cigarette or smoke Change Oil Long Term StorageProtect Fuel System Oil Cylinder BoreProbem Correction192525GS KIT, Pump/Engine Mounting Hardware 196006GS Description196519GS 193482GSSeat Plate, Plastic 190630GS 29 190575GS O=RING, 4 X 30 190576GS Screw 190578GS190629GS 190632GS459 Engine 4.0 HP, Briggs and Stratton, 10D902 Exploded View51A 1211 456 597ENGINE, 4.0 HP, Briggs and Stratton 305 10D902 Exploded ViewENGINE, 4.0 HP, Briggs and Stratton, 10D902 Parts List Page Owners Warranty Responsibilities Purchased and Used Elsewhere in the UnitedEmissions Durability Period and Air index Information On Your Engine Emissions LabeSimboos de Peigro y Significados Sears, Roebuck and Co., Dept WA, Hoffman Estates, mL60179Advertencia Uando Opere EL EquipoCuando Transporte O Repare EL Equipo ADVERTENCiA PrecaucionConozca SU MAQUtNA Lavadora DE PRE$1ON Montaje DE LA Maquna Lavadora a Preson Retire LA Maquna Lavadora a Preson DE LA CajaContenido DE LA Caja Agregue Aceite de MotorConecte la Manguera y el Suministro de Agua a la Bomba Lista de Revision Previa al Arranque del MotorCuando Anada Combustible Ubicaci6n del Lavadora a Presi6n C6MO Usar SU Maquina Lavadora a PresionPRECAUCI0N C6mo Dare Arranque a su M&quina Lavadora a Presi6nPRECAUCtON1 C6mo Detener su Mquina Lavadora a Presi6nC6mo Usar las Puntas de Rocio Limpieza y Aplicaci6n de Quimico La Presi6n gajaLa Presi6n Ata ImportanteEnjuage de a Mquina Lavadora a Presion Limpiando e TuboSistema de Enfriamiento Automtico Aivio Trmico ESPECIFtCACtONES INFORMAClON Tccnica Sobre ELMotor DEL ProductoControl DE Enisiones RESPONSABtLIDADES DEL PROPtETARIORECONENDACtONES Generales Antes DE Cada USORevise La Manguera De Alta Presi6n Revise Limpie Colador EntradaLa Boquilla Revise La Pistola La Extensi6n ParaMantenjmjento DEL Motor Sistema de Refrigeraci6n de Aire AdvertencjaProporcione Servicio a la Bujia Servicio de ApagachispasDespues DE Cada USO PrecaucionAlmacenamiento Prolongado OtrosProbema Souci6nFast Rapido Emisiones Page U oHOGAR sM 18005336937 Call anytime, day or night U.S.A. onlyDomiciRio, y pars ordenar piezas

580.75201 specifications

The Craftsman 580.75201 is a versatile and powerful leaf blower designed to make yard work more efficient and effective. With its robust performance and user-friendly features, this model appeals to both homeowners and professional landscapers.

One of the standout characteristics of the Craftsman 580.75201 is its powerful engine. Equipped with a 27cc 2-cycle gas engine, this leaf blower offers excellent airflow and velocity, allowing you to tackle even the heaviest leaf piles and debris with ease. The impressive airspeed, reaching up to 200 miles per hour, ensures that leaves and debris are not just disturbed but blown away quickly and efficiently.

The design of the Craftsman 580.75201 emphasizes user comfort and control. It features an ergonomic handle, which reduces fatigue during prolonged use. The machine also includes a throttle control, giving users the ability to adjust speeds according to their specific needs. This adaptability makes it perfect for various tasks, from clearing grass clippings to moving heavier leaves.

In terms of technology, the Craftsman 580.75201 incorporates advanced start features that reduce starting effort. The easy-start system ensures a hassle-free ignition process, allowing users to get to work without the frustration of a stubborn engine. Additionally, its lightweight construction helps enhance maneuverability while reducing strain during operation.

Maintenance is simplified with this leaf blower, thanks to its accessible design. Easy access to the air filter and spark plug allows users to perform routine checks and replacements, extending the lifespan of the machine and ensuring optimal performance. Additionally, its fuel-efficient engine helps users save on fuel costs while minimizing environmental impact.

Noise reduction technology is another notable feature. The Craftsman 580.75201 operates at a lower decibel level compared to many traditional gas leaf blowers, allowing users to work without causing significant disturbance to neighbors or local wildlife.

Overall, the Craftsman 580.75201 stands out as a reliable and efficient leaf blower. Its powerful engine, user-friendly design, and innovative features make it an excellent tool for seasonal yard maintenance, ensuring that cleaning up leaves and debris can be done quickly and effectively. Whether for residential tasks or professional landscaping duties, this leaf blower proves to be a valuable addition to any outdoor toolkit.
Top Page Image Contents