| Accessories | EN |
|
Metal Cleaner | For cleaning of metal such as |
| |
| garden tools. |
|
|
Car Combi Cleaner | For cars etc. With rinsing wax. |
| |
Alu Cleaner | For surfaces of aluminium. |
| |
| Applied with an atomizer. |
| |
Oil & Grease | For cleaning of grease and |
| |
Cleaner | oil on motors for instance. |
| |
| Applied with an atomizer. |
| |
Wood Cleaner | For cleaning of wooden sur- |
| |
| faces incl. of wooden garden |
| |
| furniture. |
|
|
|
|
| |
4.0 Maintenance | EN |
| |
|
|
|
|
WARNING! Always disconnect the electrical plug from the socket prior to maintenance or cleaning. To ensure a long and problem free working life, please take the following advice:
Wash out water hose, high pressure hose, spray lance and accessories before mounting.
Clean the connectors of dust and sand. Rinse the detergent spraying attachment after use.
Any repair should always be made in an authorized workshop with original spare parts.
4.1 Cleaning of nozzle
A clogging up in the nozzle causes a pump pres- sure which is too high. This is why cleaning is re- quired immediately.
1.Stop the machine and disconnect the nozzle.
2.Clean the nozzle. IMPORTANT: The cleaning tool (4) should only be used when the nozzle is detached!
3.Flush the nozzle backwards with water.
4.2 Cleaning of water inlet filter
Clean the water inlet fi lter regularly once a month or more frequently according to use. Carefully loosen the fi lter with a screwdriver and clean it. Check that it is intact before
Maintenance EN
The inlet fi lter must always be fi tted inside the water inlet pipe to fi lter out sand, limestone and other impurities, as they will damage the pump valves.
CAUTION: Failure to fi t the fi lter will invalidate the guarantee.
4.3 Cleaning of machine vents
The machine should be kept clean so as to let cool- ing air pass freely through the machine vents.
5.0 Storage | EN |
The machine should be stored in a frost-free room!
Pump, hose and accessories should always be emptied of water prior to storing as follows:
1.Stop the machine (press the On/Off switch “O” (1) and detach water hose and accessory.
2.Restart the machine and activate the trigger (9b). Let the machine run until no more water runs through the spray gun (9).
3.Stop the machine, unplug and wind up hose and cable (5).
4.Place spray handle, nozzles and other accesso- ries in the holders of the machine.
Should the machine by mistake be frozen, it will be necessary to check it for damage.
NEVER
Frost damages are not covered by the guarantee!
6.0Environmental protection
Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling center and
disposed of in an environmentally safe way.
7