PW2725, PW3230, PW4035
Pre-Operation
Keep hose away from sharp
objects Bursting hoses may cause injury. Examine hoses regularly and replace if damaged. Do not attempt to mend a damaged hose.
Unpacking
Remove the equipment and all parts from the carton.. The carton should contain the following:
2. Slide clear plastic detergent hose | 5. Connect the high pressure hose to |
onto brass hose barb (See Figure 2).. | the pump outlet (See Figures 4 and |
| 5).. |
|
•One pressure washer (pump, engine, cart base)
•One cart handle assembly
•One spray gun and quick connect lance
•Five spray tips
•One high pressure hose
•One pack of nuts, bolts, and manuals
If any parts are missing, DO NOT
RETURN THE UNIT TO THE RETAILER. Know the unit’s model number (located on the serial number tag on the pressure washer frame) and call
After unpacking the product, inspect it carefully for any damage that may have occurred during transit.. Make sure to tighten fittings and bolts before using the pressure washer..
do not operate the unit if
it’s damaged during shipping,
Figure 2 – Attach suction tube to barb fitting
3.Insert quick connect spray tips into rubber holders on front of the placard.. (See Figure 3)..
Figure 3 - Insert spray tips into the holder
Figure 5 – Connect high pressure hose to pump
6.Attach the lance with nozzle to the gun (see Figure 6)..
Figure 6 – Attach lance to gun
handling, or use. Damage could result in bursting and cause injury or property damage.
Assembly
1.Slide the handle assembly over the lower legs of the cart base. Use the star knob and bolt to secure the legs.. See Figure 1..
Star
Knob
Figure 1 – Assemble Handle
4.Secure garden hose (not included) to the inlet connection on pump (See Figure 4)..
Chemical Injector
Hose Barb
High Pressure
Hose
Pump
Outlet
Pump
ThermalInlet
Relief
Garden Hose
Figure 4 - Pump hook up
5 | www.chpower.com |
|