DeVillbiss Air Power Company D21684 warranty Multi-Reg Hi-Low/Quick Connect Dual Lance

Page 8

ASSEMBLY

2. Connect wand to gun. Tighten securely.

Multi-Reg

Hi-Low/Quick Connect

Dual Lance

3.Attach high pressure hose to gun. The point of attachment for the high pressure hose will differ depending on the model purchased. Tighten securely.

OR

OR

4.Connect chemical hose to the pump by one of the following methods:

a.Press the chemical hose onto the barb fitting located near the high pressure hose connection- see illustration A.

OR

b.Place chemical hose with fitting into chemical injector (black elbow)-see illustration B.

Illustration A

Illustration B

8 — ENG

Image 8

Contents Pressure Washer Service Policy Index Frequently Asked Questions Important Safety Instructions Safety Manual for Safety, Operation, and Maintenance Instructions Cleaning Units GPM x PSIOwners Responsibilities GlossaryBOX Contents AssemblyMulti-Reg Hi-Low/Quick Connect Dual Lance Illustration a Illustration BIllustration C Operating ProceduresStart-Up Operating Procedures contd Connect Water Turn on WaterOperating Procedures contd High Pressure Operation Multi-Reg High Pressure Setting Hi-Low Dual LanceQuick Connect with Nozzles Quick Connect Coupler Illustration a Operating Procedures contd Low Pressure OperationMulti-Reg Low Pressure Setting Operating Procedures contd Pressure adjustment Annovi ReverberiOperating Procedures contd Chemical Flow Adjustment Shut Down ProcedureThermal Relief Valve Turn off WaterMaintenance HoursMaintenance contd Following pump 2200 psi Following pump 2400 psiWas shipped from the factory With 10W30 synthetic oilMaintenance contd Nozzle cleaning Dual Lance Soap NozzleMaintenance contd Water Inlet Screen Cleaning Storage & Winter Storage Preparation for StorageTroubleshooting Guide Problem Cause CorrectionAssembly Idle down assembly ifEngine will not idle down If equipped with Idle downLimited Warranty General Manual for