Briggs & Stratton 2550 PSI Assembly, Unpack Pressure Washer, Attach Handle and Accessory Tray

Page 8

Assembly

Read entire operator’s manual before you attempt to assemble or operate your new pressure washer.

Your pressure washer requires some assembly and is ready for use after it has been properly serviced with the recommended oil and fuel.

If you have any problems with the assembly of your pressure washer, please call the pressure washer helpline at

(800)743-4115. If calling for assistance, please have the model, revision, and serial number from the data tag available.

Unpack Pressure Washer

1.Remove the parts bag, accessories, and inserts included with pressure washer.

2.Open carton completely by cutting each corner from top to bottom.

3.Ensure you have all included items prior to assembly.

Items in the carton include:

• Main Unit

• Handle

• High Pressure Hose

• Spray Gun

• Nozzle Extension with Quick Connect Fitting

• Plastic Accessory Tray

• Oil Bottle

• Parts Bag (which includes the following):

•Safety Goggles

•Operator’s Manual

•Owner’s Registration Card

•Bag containing 4 Multi–Colored Project Pro® Nozzles

•Handle Fastening Hardware Kit (which includes):

•Carriage Bolts (2)

•Plastic Knobs (2)

•Tree Clips (4)

To prepare your pressure washer for operation, you will need to perform these tasks:

1.Fill out and send in registration card.

2.Attach handle and accessory tray to main unit.

3.Add oil to engine crankcase.

4.Add fuel to fuel tank.

5.Connect high pressure hose to spray gun and pump.

6.Connect water supply to pump.

7.Attach nozzle extension to spray gun.

8.Select/attach quick connect Project Pro® nozzle to nozzle extension.

Attach Handle and Accessory Tray

1.Place handle (A) onto handle supports (B) connected to main unit. Make sure holes (C) in handle align with holes (C) on handle supports.

A

C

B

NOTE: It may be necessary to move the handle supports from side to side in order to align the handle so it will slide over the handle supports.

2.Insert carriage bolts (D) through holes from back of unit and attach a plastic knob (E) from front of unit. Tighten by hand.

E

D

3.Place accessory tray (F) over holes (H) on handle (viewing from front of unit). Push the tree clips (G) into the holes until they sit flat against the accessory tray.

H

G

F

4.Insert multi–colored Project Pro® nozzles and other supplied accessories in spaces provided in accessory tray. See How to Use Accessory Tray.

8

BRIGGSandSTRATTON.COM

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Operator’s Manual Where to Find Us Pressure WasherEngine Date PurchasedTable of Contents Operator Safety Safety RulesHazard Symbols and Meanings Equipment DescriptionWhen Adding or Draining Fuel Unintentional sparking can result in fire or electric shock Broken bones, fractures, bruises, or sprains could resultContact with muffler area can result in serious burns Risk of eye injury Spray can splash back or propel objects High pressure spray may damage fragile items including glassAssembly Attach Handle and Accessory TrayUnpack Pressure Washer Items in the carton includeAdd Engine Oil Add FuelFuel must meet these requirements High AltitudeChecklist Before Starting Engine Connect Hose and Water Supply to PumpFeatures and Controls Clearances and Air Movement OperationPressure Washer Location How to Start Your Pressure Washer How to Stop Your Pressure Washer Follow these instructions to change Project Pro nozzles How to Use Accessory TrayHow to Use Project Pro Nozzles To apply detergent, follow these steps Cleaning and Applying DetergentUsage Tips Cleaning Detergent Siphoning Tube Pressure Washer RinsingAutomatic Cool Down System Thermal Relief For RinsingPressure Washer Maintenance MaintenanceMaintenance Schedule Nozzle Maintenance Ring MaintenanceCheck High Pressure Hose Check Detergent Siphoning TubeEngine Maintenance Oil Oil RecommendationsChecking Oil Level Adding Engine OilService Air Cleaner To service the air cleaner, follow these stepsService Spark Plug Install spark plug and tighten firmlyKeep areas within heavy line clear of debris After Each UseAir Cooling System Winter Storage Long Term StorageTroubleshooting Problem Cause CorrectionWarranties Emissions Control System WarrantyOwner’s Warranty Responsibilities Claims and Coverage Exclusions MaintenanceEmission Information Limited Warranty 800 Product SpecificationsCommon Service Parts Manual del Operario Dónde encontrarnos Limpiadora a PresiónMotor Fecha de compraResolución de problemas Garantías Seguridad de OperarioMontaje Características y mandos OperandoReglas de seguridad Seguridad de OperarioDerscripción del equipo Riesgo de electrocución Opere el limpiadora a presión Solamente al aire libreCuando Pruebe LA Bujía DEL Motor Aviso Montaje Desembale la limpiadora a presiónConecte el manubrio y bandeja accesoria Los artículos que se encuentran en la caja sonAgregar aceite al motor Agregue combustibleEl combustible debe reunir los siguientes requisitos Gran altitudProporcione el suministro de agua adecuado Conecte la manguera y el suministro de agua a la bombaLista de revision previa al arranque del motor Características y mandos Bomba Desarrolla alta presión de aguaOperando Ubicación del limpiadora a presiónCómo darle arranque a su máquina limpiadora a presión Espacio libre alrededor del limpiadora a presiónAdvertencia Utilización de la bandeja de accesorios Cómo detener su máquina limpiadora a presiónCómo usar las boquillas Project Pro La Presión BajaLa Presión Alta Para cambiar las boquillas de Project ProLimpieza y aplicación del detergente Enjuage de la máquina limpiadora a presiónUso inclina Para aplicar el detergente, siga los siguientes pasosLimpieza del tubo de inyección de detergente Sistema de enfriamiento automático alivio térmicoMantenimiento de la limpiadora a presión MantenimientoPlan de mantenimiento Revise y limpie el colador de entrada Revise la manguera de alta presiónChequee el tubo de sifón del detergente Revise la pistolaMantenimiento del motor Mantenimiento de los anillos oComprobación del nivel de aceite Aceite Recomendaciones sobre el aceiteCambio de aceite del motor Afloje el tornillo a y quite la cubierta BServicio del depurador de aire Servicio del bujíaDespues de cada uso Servicio del apagachispasSistema de refrigeración de aire BRIGGSandSTRATTON.COMAlmacenamiento para invierno Almacenamiento prolongadoResolución de problemas Problema Causa SoluciónGarantías Garantía del sistema de control de emisionesResponsabilidades de la garantía del propietario Operaciones de mantenimiento que se enumeran en lasInformación sobre emisiones Garantía Limitada Temperatura del suministro Especificaciones del productoServicio común despide

2550 PSI specifications

The Briggs & Stratton 2550 PSI pressure washer is a powerful cleaning tool designed to tackle a variety of outdoor tasks with ease. With a maximum cleaning power of 2550 PSI, this machine is well-equipped for efficiently removing dirt, grime, and stubborn stains from surfaces such as driveways, patios, decks, and vehicles.

One of the standout features of the Briggs & Stratton 2550 PSI pressure washer is its durable and reliable engine. Powered by a Briggs & Stratton 550 Series engine, it delivers consistent performance and dependable starts, allowing users to get to work without the frustration of engine failure. This engine is designed with an overhead valve (OHV) configuration, which increases efficiency while reducing emissions.

The pressure washer is also user-friendly, featuring a convenient push-button start system. This eliminates the need for pull cords, making it easier for anyone to get started quickly. The unit boasts an ergonomic design that includes a comfortable handle and the option for folding handles, making storage and transport simple.

In terms of functionality, the Briggs & Stratton 2550 PSI model is equipped with a 2.0-gallon per minute (GPM) water flow rate, allowing for effective cleaning without excessive water usage. The unit comes with a variety of nozzle options, providing different spray patterns to suit various tasks. The quick-connect nozzle system makes switching between nozzles easy and efficient.

Another key characteristic of this pressure washer is its rugged frame and all-terrain wheels, which ensure stability and maneuverability during operation. The wheels are designed to withstand various surfaces, allowing users to roll the machine over grass, gravel, or smooth pavement with ease.

Furthermore, the Briggs & Stratton 2550 PSI pressure washer features a built-in detergent tank that simplifies the process of applying soap while cleaning. This tank is easy to fill and ensures that users can tackle tougher cleaning jobs without the hassle of additional equipment.

With its combination of power, efficiency, and user-friendly design, the Briggs & Stratton 2550 PSI pressure washer stands out in the market as a reliable tool for homeowners and outdoor cleaning enthusiasts alike. Its blend of innovative features and practicality makes it an excellent choice for achieving professional-quality cleaning results.
Top Page Image Contents