Mounting Assembly

Follow these instructions if the PowerMax venting system was purchased as an assembly kit.

1.Remove the vent kit assembly (indoor).

2.Mount the plenum assembly on the flue collector top using the screw provided.

3.Connect the wire harness to the heater control box. Follow the instructions on page 5.

4.Mount the new top on the top of the heater. Using a #28 drill bit to drill the four holes on the right side of the heater for the mounting screws. The front and back side of the top will snap into the heater with no screws.

Figure 1.

DESCRIPTION OF SYSTEM OPERATION

SYSTEM OPERATION:

1.Set the thermostat to the lowest setting.

2.Push the power switch off. The electric power supply requirement is:

•115 volts 60 Hz, 1 Ph, 1.5 Amp

3.Remove the door.

4.Push in the gas control knob slightly and turn clockwise to “OFF”.

5.Wait (5) minutes to clear out any gas. If you then smell gas STOP. Follow the safety information. If you don’t smell gas, go to the next step.

6.Turn the knob on the gas control counterclockwise to “ON”.

7.Replace the door.

8.Make sure the pump is running and is primed.

9.Push the power switch on.

10.Set the thermostat to the desired setting.

•a. Fan motor starts, draft proving switch closes.

•b. Ignition module energized.

•c. Check for spark at the gas pilot.

11.The pilot should spark and then ignite, then the main burners will ignite.

12.Heater will operate until the desired temperature is reached.

PRESSURE SWITCH

OPERATION

The air pressure switch is a safety device to insure that the blower is operating and has been designed to monitor the vacuum (negative) pressure within the fan housing. The air pressure switch is in the ignition module circuit and the ignition module does not operate unless the switch is closed.

Rev. G 1-22-04

	AIR PRESSURE SWITCH
	Figure 2.
A-3	P/N 471048
	P/N 471048

100 specifications

Pentair 100 is an advanced water filtration system designed to address a variety of water purification needs for residential and commercial applications. Renowned for its efficiency and reliability, the Pentair 100 incorporates cutting-edge technologies that enhance the quality of water while ensuring ease of use.

One of the standout features of the Pentair 100 is its multi-stage filtration process. This system utilizes a combination of sediment filters, activated carbon filters, and advanced membrane technology to remove impurities including bacteria, viruses, heavy metals, and chlorine. The sediment filter captures larger particles, while the activated carbon filter removes organic compounds and improves taste and odor. The membrane technology employed in the system further refines the water by filtering out microscopic contaminants, ensuring purity.

The Pentair 100 is equipped with an innovative monitoring system that allows users to track filter performance and maintenance needs in real time. This feature is designed to optimize the lifespan of the filters and ensure that the system operates at maximum efficiency. Additionally, the intuitive LED indicators provide clear notifications regarding filter replacements and system status, simplifying the upkeep of the filtration unit.

Sustainability is another core aspect of the Pentair 100. The system is designed to reduce water wastage, making it an environmentally friendly option for consumers. Its efficient filtration process minimizes the need for bottled water, contributing to reduced plastic waste. Furthermore, the materials used in the construction of the unit are durable and recyclable, aligning with contemporary green initiatives.

The compact design of the Pentair 100 makes it suitable for various setups, whether it is for a small apartment or a larger commercial space. Installation is straightforward, with flexible options for under-sink or point-of-use configurations. This versatility extends to its compatibility with existing plumbing systems, allowing for seamless integration.

In summary, the Pentair 100 embodies advanced filtration technologies, sustainable operations, and user-friendly features, making it an excellent choice for anyone looking to improve their water quality. Its robust performance, combined with smart monitoring capabilities, ensures that users have access to safe and delicious water while promoting environmental responsibility. Whether for everyday use or special needs, the Pentair 100 stands out as a premier solution in the water filtration market.