Pentair 100 installation manual Warranty Information, Safety Rules, Operation contd

Page 4

Operation (contd.)

4

 

 

This instruction manual provides operating instructions, installation and service information for the MiniMax Plus high performance heater. The information in this manual applies to the MiniMax Plus 150, 195, 200, 250, 300, 350, and 400 natural gas and propane (LP) models.

It is very important that the owner/installer read and understand the section covering installation instructions, and recognize the local and state codes before installing the MiniMax Plus. History and experience has shown that most heater damage is caused by improper installation practices.

WARRANTY INFORMATION

The MiniMax Plus pool heater is sold with a limited factory warranty. Specific details are described on the back cover of this manual and a copy of the warranty and warranty registration card are included with the product. Return the warranty registration card after filling in the serial number from the rating plate inside the heater.

Pentair Pool Products’ high standards of excellence include a policy of continuous product improvement resulting in your state-of-the-art heater. We reserve the right to make improvements which change the specifications of the heater without incurring an obligation to update the current heater equipment.

Operation

SAFETY RULES

1.Spa or hot tub water temperatures should never exceed 104° F (40° C). A temperature of 100° F (38° C) is considered safe for a healthy adult. Special caution is suggested for young children.

2.Drinking of alcoholic beverages before or during spa or hot tub use can cause drowsiness which could lead to unconsciousness and subsequently result in drowning.

3.Pregnant women beware! Soaking in water above 102° F (39° C) can cause fetal damage during the first three months of pregnancy (resulting in the birth of a brain-damaged or deformed child). Pregnant women should stick to the 100° F (38° C) maximum rule.

4.Before entering the spa or hot tub, the user should check the water temperature with an accurate thermometer. Spa or hot tub thermostats may err in regulating water temperatures by as much as 4° F (2.2° C).

5.Persons with a medical history of heart disease, circulatory problems, diabetes or blood pressure problems should obtain their physician's advice before using spas or hot tubs.

6.Persons taking medication which induce drowsiness, such as tranquilizers, antihistamines or anticoagulants should not use spas or hot tubs.

WARNING

Should overheating occur or the gas supply fail to shut off, turn off the manual gas control valve to the appliance. Do not use this heater if any part has been under water. Immediately call a qualified service technician to inspect the heater and to replace any part of control system and gas control which has been under water.

P/N 471048

Rev. G 1-22-04

Page 3 Page 5
Image 4
Page 3 Page 5
Contents What to do if YOU Smell GAS For Your Safety Read Before OperatingFor additional free copies of this manual call 800 Table of Contents Code Requirements Important NoticesSafety Rules Warranty InformationOperation contd Operating Instructions For Your Safety Read Before LightingTo Turn OFF GAS to Appliance Safety Lockout Minimax Plus Electronic Ignition LIGHTING/OPERATION PropaneLighting Instructions What to do if YOU Smell GASIndicator Light Description Operating ControlsTroubleshooting Controls Heat HeatTroubleshooting Controls Maintenance Instructions Energy Saving TipsSpring and Fall Operation Winter OperationChemical Balance Pool and SPA WaterIf pH becomes too high over alkaline, it has these effects Alkalinity High LowInstallation Instructions SpecificationsPlumbing Water ConnectionsPlumbing Connections QUICK-FLANGE Installation Instructions For 1½ & 2 in. Copper PipeGAS Line Installations GAS ConnectionsOutdoor Vent CAP Installation Outdoor Installation onlyVentilation Front MiniMax heaters, including PowerMax versions Stack Type Indoor Draft Hood KITIndoor Draft Hood Installation Transformer Wiring InstructionMiniMax Plus Electronic Installation contd Ignition Wiring DiagramMiniMax Plus Millivolt Wiring Diagram Wire RemoteHeater exchanger scaled Heater Short Cycling Rapid On and Off OperationMinimax Plus Heater ALL Models MiniMax Plus Only Parts List Description QTYMiniMax Plus Only Parts List, contd Description QTYPowerMax Pool & Spa Heater Introduction General SpecificationCode Requirements Mounting Assembly Venting Indoor Installations Powermax Venting Guidelines Outdoor Installation Powermax Venting Guidelines 22-04 Rev. G Wiring Diagram for Powermax KIT Powermax Heater ALL Models PowerMax Heater Only Parts List Description QTYPowerMax Heater Only Parts List, contd Description QTYPowerMax Assembly Parts List PowerMax AssemblyPentair Pool Products, Inc
Related manuals
Manual 36 pages 41.25 Kb

100 specifications

Pentair 100 is an advanced water filtration system designed to address a variety of water purification needs for residential and commercial applications. Renowned for its efficiency and reliability, the Pentair 100 incorporates cutting-edge technologies that enhance the quality of water while ensuring ease of use.

One of the standout features of the Pentair 100 is its multi-stage filtration process. This system utilizes a combination of sediment filters, activated carbon filters, and advanced membrane technology to remove impurities including bacteria, viruses, heavy metals, and chlorine. The sediment filter captures larger particles, while the activated carbon filter removes organic compounds and improves taste and odor. The membrane technology employed in the system further refines the water by filtering out microscopic contaminants, ensuring purity.

The Pentair 100 is equipped with an innovative monitoring system that allows users to track filter performance and maintenance needs in real time. This feature is designed to optimize the lifespan of the filters and ensure that the system operates at maximum efficiency. Additionally, the intuitive LED indicators provide clear notifications regarding filter replacements and system status, simplifying the upkeep of the filtration unit.

Sustainability is another core aspect of the Pentair 100. The system is designed to reduce water wastage, making it an environmentally friendly option for consumers. Its efficient filtration process minimizes the need for bottled water, contributing to reduced plastic waste. Furthermore, the materials used in the construction of the unit are durable and recyclable, aligning with contemporary green initiatives.

The compact design of the Pentair 100 makes it suitable for various setups, whether it is for a small apartment or a larger commercial space. Installation is straightforward, with flexible options for under-sink or point-of-use configurations. This versatility extends to its compatibility with existing plumbing systems, allowing for seamless integration.

In summary, the Pentair 100 embodies advanced filtration technologies, sustainable operations, and user-friendly features, making it an excellent choice for anyone looking to improve their water quality. Its robust performance, combined with smart monitoring capabilities, ensures that users have access to safe and delicious water while promoting environmental responsibility. Whether for everyday use or special needs, the Pentair 100 stands out as a premier solution in the water filtration market.
Top Page Image Contents