Zenoah SRTZ2401 manual Limited Warranty

Page 53

RedMax

LIMITED WARRANTY

EMISSION-RELATED PARTS, FOR TWO (2) YEARS FROM THE DATE OF ORIGINAL DELIVERY OF THE UNIT,

RedMax / KOMATSU ZENOAH AMERICA, INC., THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL AND EACH SUBSEQUENT PURCHASER, ANY PART OR PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP.

EMISSION-RELATED PARTS ARE:

THE CARBURETOR ASSEMBLY, COIL ASSEMBLY, ROTOR, SPARKPLUG,

AIR FILTER, FUEL FILTER, INTAKE MANIFOLD, AND THE GASKETS

ALL OTHER PARTS EXCEPT ABOVE PARTS, FOR TWO (2) YEARS OF USE, 90 DAYS FOR RENTAL USE, FROM THE DATE OF ORIGINAL PURCHASE, THE COMPANY, THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL PURCHASER, ANY PART OF PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP. THIS IS THE EXCLUSIVE REMEDY.

THE PURCHASER SHALL BEAR COSTS OF TRANSPORTING THE UNIT TO AND FROM THE RedMax DEALER.

THE PURCHASER SHALL NOT BE CHARGED FOR DIAGNOSTIC LABOR WHICH LEADS TO THE DETERMINATION THAT A WARRANTED PART IS DEFECTIVE, IF THE DIAGNOSTIC WORK IS PERFORMED AT THE RedMax DEALER.

THE PURCHASER OR OWNER IS RESPONSIBLE FOR THE PERFORMANCE OF THE REQUIRED MAINTENANCE AS DEFINED BY THE MANUFACTURER IN THE OWNER/OPERATOR MANUAL.

ANY WARRANTED PART WHICH IS NOT SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE, OR WHICH IS SCHEDULED ONLY FOR REGULAR INSPECTION TO THE EFFECT OF "REPAIR OR REPLACE AS NECESSARY" SHALL BE WARRANTED FOR THE WARRANTY PERIOD. ANY WARRANTED PART WHICH IS SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE SHALL BE WARRANTED FOR THE PERIOD OF TIME UP TO THE FIRST SCHEDULED REPLACEMENT POINT FOR THE PART.

ANY REPLACEMENT PART THAT IS EQUIVALENT IN PERFORMANCE AND DURABILITY MAY BE USED IN NON- WARRANTY MAINTENANCE OR REPAIRS, AND SHALL NOT REDUCE THE WARRANTY OBLIGATION OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO OTHER ENGINE COMPONENTS CAUSED BY THE FAILURE OF A WARRANTED PART STILL UNDER WARRANTY.

THE WARRANTY DOES NOT APPLY TO THOSE UNITS WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF INSTRUCTION LISTED IN THE OWNER/OPERATOR MANUAL FOR PROPER USE AND MAINTENANCE OF THE UNITS, ACCIDENTAL MISHANDLING, ALTERATION, ABUSE, IMPROPER LUBRICATION, USE OF ANY PARTS OR ACCESSORIES OTHER THAN THOSE SPECIFIED BY THE COMPANY, OR OTHER CAUSES BEYOND THE COMPANY'S CONTROL.

THIS WARRANTY DOES NOT COVER THOSE PARTS REPLACED BY NORMAL WEAR OR HARMLESS CHANGES IN THEIR APPEARANCE.

THERE ARE NO OTHER EXPRESS WARRANTIES.

IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO TWO (2) YEARS OF USE FROM THE ORIGINAL DELIVERY DATE.

LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE UNDER ANY AND ALL WARRANTIES ARE EXCLUDED.

SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

IF YOU NEED TO OBTAIN INFORMATION ABOUT THE NEAREST SERVICE CENTER, PLEASE CALL RedMax / KOMATSU ZENOAH AMERICA, INC. AT (770)-381-5147.

IMPORTANT: YOU WILL RECEIVE A WARRANTY REGISTRATION CARD AT TIME OF PURCHASE.PLEASE FILL

OUT THE CARD AND SEND IT TO RedMax / KOMATSU ZENOAH AMERICA WITHIN SEVEN (7) DAYS. BE SURE TO KEEP A COPY FOR YOUR RECORDS.

KOMATSU ZENOAH AMERICA INC.

4344 Shackleford Road Suite 500

Norcross, Georgia 30093

Page 52 Page 54
Image 53
Page 52 Page 54
Contents SRTZ2401 Information Informationinformación Contents Advertencias Contenidas EN EL Manual Differents Types D’AVERTISSEMENT DE CE Mode D’EMPLOITables des matieres Contenido Parts location SpecificationsEspecificaciohes Emplacement des pieces Situación de las piezasFiche technique Emission Control Symbols on the machinePosition Posición EmplacementControl DE Emisiones Information Importante Concernant LE MoteurWorking Circumstance For safe operationWorking Condition Conditions DE Travail Consignes de securite Instrucciones de seguridadCondiciones DE Trabajo PrecaucionesBefore Starting the Engine Working PlanPlan DE Trabajo Plan DE TravailAvant DE Mettre LE Moteur EN Marche Antes DE Arrancar EL MotorStarting the Engine Using the ProductUtilisation DE LA Machine Demarrage DU MoteurArranque DEL Motor USO DEL ProductoIf Someone Comes MaintenanceEntretien SI QUELQU’UN S’APPROCHESI Alguien SE Aproxima MantenimientoTransportation Handling FuelRefill after cooling the engine Manipulación DEL Combustible Manipulation DU CarburantLlenar una vez que el motor se haya enfriado TransportSE1 SE2 Installing Handle Set upAttaching the Trimming Mechanism SE2 Balance UnitMise EN Place DE LA Poignee Assemblage MontajeInstalación DEL Mango Equilibrage DE LA MachineRecommended Mixing Ratio Gasoline 50OIL When using Zenoah genuine oilFuel Carburant Combustible Rapport DE Melange Recommande Essence 50 HuileLors de l’utilisation de la véritable huile Zenoah Proporción DE LA Mezcla Recomendada Gasolina 50 AceiteFor Your Engine LIFE, Avoid HOW to MIX FuelFueling the Unit Remplissage DU Reservoir Comment Obtenir UN BON Melange Como Mezclar EL CombustibleEviter Pour Prolonger LA Duree DE VIE DU Moteur Abastecimiento DE LA UnidadFuel Aceite Para USO EN Motores DE 4-TIEMPOS Cutting head will start rotating upon the engine starts OperationOP1 OP2 OP3 OP4 Starting Engine Palanca del estrangulador 2 cerrar Fonctionnement UsoAdjusting Idling Speed OP6 Adjusting Throttle CableOP5 OP6 Stopping Engine OP3Ajuste Cable DEL Acelerador Reglage Câble D’ACCÉLÉRATEURReglage DU Ralenti OP6 Ajuste DE LA Velocidad DE Marcha EN Vacío OP6Clamp bolt Trimming mechanism Tighten Loosen OP7 Adjusting the Angle of the Cutting Blades OP7Boulon de serrage Mécanisme de coupe Serrer Desserrer Réglage DE Langle DES Lames Tranchantes OP7Ajuste DEL Ángulo DE LAS Cuchillas DE CORTE. OP7 Perno de sujeción Mecanismo de poda Ajustar AflojarMaintenance Chart MaintenanceMantenimiento EntretienTableau D’ENTRETIEN Tabla DE MantenimientoBlades MA1 MA1Quick TIP MA2Entretien Mantenimiento MA3 MA4 MA5 Replacement Plug is a NGK CMR7HAIR Filter Fuel FilterFiltro DE Aire Filtre a AIRFiltre a Carburant Filtro DE Combustible Bougie D’ALLUMAGE BujíaSpark Arrester Muffler MA6Spark arrester Intake AIR Cooling VentOuïe DU Refroidissement PAR AIR PARE-ETINCELLESParachispas Toma DE Aire DE RefrigeraciónStorage Procedures to be Performed After Every 100 Hours of USEMA7 MA8 Cylinder Intake air cooling vent backRangement Almacenamiento Procedure a Effectuer Toutes LES 100 Heures D’UTILISATIONCylindre Ouïe d’entrée d’air de refroidissement arrière Cilindro Toma de aire de refrigeración posteriorGuide de localisation des pannes Troubleshooting guide11. Guía de localización y solución de problemas Nota SRTZ2401Parts list Cutting Unit SRTZ2401 S/N Z000001 and up Engine Unit SRTZ2401 S/N 60100101 and up Qty Key# Part Number Description Owner’s warranty responsibilities Manufacturer’s warranty coverageObligations du propriétaire liées à la garantie Couverture de la garantie constructeurResponsabilidades del propietario Cobertura de la garantía dada por el fabricanteLimited Warranty RedMax Garantie limitée Garantía Limitada Komatsu Zenoah America INC

SRTZ2401 specifications

The Zenoah SRTZ2401 is a remarkable example of modern technology in the realm of small engine equipment. Renowned for its high performance and efficiency, this versatile power tool has gained popularity among professionals and enthusiasts alike. One of the standout features of the SRTZ2401 is its lightweight design, making it easy to maneuver for extended periods without causing undue fatigue, which is a significant advantage for users who rely on mobility during their tasks.

At the heart of the SRTZ2401 is a robust 24cc two-stroke engine, designed for optimal power output while maintaining fuel efficiency. This engine configuration not only provides ample torque for demanding applications but also ensures quicker throttle response, allowing users to achieve precise control in various settings. The advanced combustion technology integrated into this model ensures cleaner emissions, highlighting Zenoah's commitment to environmental sustainability.

The SRTZ2401 is equipped with an easy-start system that minimizes the effort required to start the engine, thus enhancing the user experience, especially for those who might struggle with recoil starters. Additionally, the engine features a durable construction that promotes longevity and reliability. The combination of high-quality materials and innovative design means that users can depend on this tool for a variety of applications, from gardening to landscaping.

Another noteworthy characteristic of the SRTZ2401 is its anti-vibration technology, which significantly reduces user fatigue and enhances comfort during operation. This feature is particularly beneficial for professionals who spend long hours in the field, ensuring a smoother and more enjoyable experience. The ergonomic handle design further contributes to this comfort, providing a secure grip that allows for precision handling.

In terms of versatility, the Zenoah SRTZ2401 offers compatibility with various attachments, expanding its usability beyond a single function. This adaptability makes it a valuable asset for anyone in need of a multi-purpose tool. Whether users require a trimmer, edger, or blower, the SRTZ2401 can meet those needs with ease.

In summary, the Zenoah SRTZ2401 stands out for its lightweight and effective design, powerful engine, user-friendly features, and adaptability for multiple applications. This combination of characteristics makes it a top choice for those seeking quality and efficiency in their outdoor power tools. With its advanced technologies, it embodies both performance and innovation, making it a staple in the small engine market.
Top Page Image Contents