Zenoah SRTZ2401 manual Parts location, Specifications

Page 6

English

1.Parts location

1.Loop handle

2.Shoulder strap hanger

3.Ignition switch

4.Throttle cable

5.Throttle lever

6.Throttle set button

7.Drive shaft housing

8.Blade

9.Gear case

10.Spark arrester

11.Starter knob

12.Fuel tank

13.Primer pump

14.Choke lever

15.Air cleaner cover

2. Specifications

English

■SRTZ2401

Overall size ( L x W x H )····································································69.1 (1755) x 8.9 (225) x 10.0 (255) in. (mm) Dry Weight w/o acc. ······················································································································13.6 (6.2) lbs (kg)

Engine

Type ·············································································Air cooled 2-stroke gasoline engine

 

Model···································································································ZENOAH GZ23N10

 

Displacement ······················································································1.5 (23.6) cu-in (cm3)

 

Max. output ··································································1.1 Hp (0.8 kW) at 8000/min-1(rpm)

 

Idle speed····························································································3000±200/min-1(rpm)

 

Fuel ·························································································Mixture (Gasoline 50 : Oil 1)

 

(when using ZENOAH genuine oil)

 

Carburetor ······················································································Walbro Diaphragm type

 

Spark Plug ······································································································NGK CMR7H

Fuel tank capacity ·························································································································21.3 fl.oz (0.63 ) Transmission ··················································································Centrifugal clutch, spiral bevel gear, cam crank Reduction ratio ·····················································································································································4.0

Durability period·············································································································································300hrs. Standard operation speed················································································································6000~9000 rpm

Cutting head

Type ·························································································Reciprocating Double blade

 

Tooth ·······················································································································42 teeth

 

Pitch·········································································································1.18 (30) in. (mm)

 

Effective cut width··················································································23.2 (590) in. (mm)

 

Angle adjust range······················135° (+45°,-90° from cutting head position aligned shaft)

Standard Accessories

Shoulder strap ···············································································································1 pc

 

Goggle···························································································································1 pc

 

Tool Kit ··························································································································1 pc

 

Blade Cover···················································································································1 pc

 

Specifications are subject to change without notice.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents SRTZ2401 Information Informationinformación Contents Differents Types D’AVERTISSEMENT DE CE Mode D’EMPLOI Tables des matieres ContenidoAdvertencias Contenidas EN EL Manual Specifications Parts locationEmplacement des pieces Situación de las piezas Fiche techniqueEspecificaciohes Symbols on the machine PositionEmission Control Control DE Emisiones EmplacementPosición Information Importante Concernant LE MoteurFor safe operation Working ConditionWorking Circumstance Condiciones DE Trabajo Consignes de securite Instrucciones de seguridadConditions DE Travail PrecaucionesWorking Plan Before Starting the EngineAvant DE Mettre LE Moteur EN Marche Plan DE TravailPlan DE Trabajo Antes DE Arrancar EL MotorUsing the Product Starting the EngineArranque DEL Motor Demarrage DU MoteurUtilisation DE LA Machine USO DEL ProductoMaintenance If Someone ComesSI Alguien SE Aproxima SI QUELQU’UN S’APPROCHEEntretien MantenimientoHandling Fuel Refill after cooling the engineTransportation Llenar una vez que el motor se haya enfriado Manipulation DU CarburantManipulación DEL Combustible TransportAttaching the Trimming Mechanism SE2 Set upSE1 SE2 Installing Handle Balance UnitInstalación DEL Mango Assemblage MontajeMise EN Place DE LA Poignee Equilibrage DE LA MachineWhen using Zenoah genuine oil FuelRecommended Mixing Ratio Gasoline 50OIL Lors de l’utilisation de la véritable huile Zenoah Rapport DE Melange Recommande Essence 50 HuileCarburant Combustible Proporción DE LA Mezcla Recomendada Gasolina 50 AceiteHOW to MIX Fuel Fueling the UnitFor Your Engine LIFE, Avoid Eviter Pour Prolonger LA Duree DE VIE DU Moteur Comment Obtenir UN BON Melange Como Mezclar EL CombustibleRemplissage DU Reservoir Abastecimiento DE LA UnidadFuel Aceite Para USO EN Motores DE 4-TIEMPOS Operation OP1 OP2 OP3 OP4 Starting EngineCutting head will start rotating upon the engine starts Fonctionnement Uso Palanca del estrangulador 2 cerrarOP5 Adjusting Throttle CableAdjusting Idling Speed OP6 OP6 Stopping Engine OP3Reglage DU Ralenti OP6 Reglage Câble D’ACCÉLÉRATEURAjuste Cable DEL Acelerador Ajuste DE LA Velocidad DE Marcha EN Vacío OP6OP7 Adjusting the Angle of the Cutting Blades OP7 Clamp bolt Trimming mechanism Tighten LoosenAjuste DEL Ángulo DE LAS Cuchillas DE CORTE. OP7 Réglage DE Langle DES Lames Tranchantes OP7Boulon de serrage Mécanisme de coupe Serrer Desserrer Perno de sujeción Mecanismo de poda Ajustar AflojarMaintenance Maintenance ChartTableau D’ENTRETIEN EntretienMantenimiento Tabla DE MantenimientoQuick TIP MA1Blades MA1 MA2Entretien Mantenimiento AIR Filter Replacement Plug is a NGK CMR7HMA3 MA4 MA5 Fuel FilterFiltre a Carburant Filtro DE Combustible Filtre a AIRFiltro DE Aire Bougie D’ALLUMAGE BujíaSpark arrester Muffler MA6Spark Arrester Intake AIR Cooling VentParachispas PARE-ETINCELLESOuïe DU Refroidissement PAR AIR Toma DE Aire DE RefrigeraciónMA7 MA8 Procedures to be Performed After Every 100 Hours of USEStorage Cylinder Intake air cooling vent backCylindre Ouïe d’entrée d’air de refroidissement arrière Procedure a Effectuer Toutes LES 100 Heures D’UTILISATIONRangement Almacenamiento Cilindro Toma de aire de refrigeración posteriorTroubleshooting guide 11. Guía de localización y solución de problemasGuide de localisation des pannes SRTZ2401 NotaParts list Cutting Unit SRTZ2401 S/N Z000001 and up Engine Unit SRTZ2401 S/N 60100101 and up Qty Key# Part Number Description Manufacturer’s warranty coverage Owner’s warranty responsibilitiesCouverture de la garantie constructeur Obligations du propriétaire liées à la garantieCobertura de la garantía dada por el fabricante Responsabilidades del propietarioLimited Warranty RedMax Garantie limitée Garantía Limitada Komatsu Zenoah America INC

SRTZ2401 specifications

The Zenoah SRTZ2401 is a remarkable example of modern technology in the realm of small engine equipment. Renowned for its high performance and efficiency, this versatile power tool has gained popularity among professionals and enthusiasts alike. One of the standout features of the SRTZ2401 is its lightweight design, making it easy to maneuver for extended periods without causing undue fatigue, which is a significant advantage for users who rely on mobility during their tasks.

At the heart of the SRTZ2401 is a robust 24cc two-stroke engine, designed for optimal power output while maintaining fuel efficiency. This engine configuration not only provides ample torque for demanding applications but also ensures quicker throttle response, allowing users to achieve precise control in various settings. The advanced combustion technology integrated into this model ensures cleaner emissions, highlighting Zenoah's commitment to environmental sustainability.

The SRTZ2401 is equipped with an easy-start system that minimizes the effort required to start the engine, thus enhancing the user experience, especially for those who might struggle with recoil starters. Additionally, the engine features a durable construction that promotes longevity and reliability. The combination of high-quality materials and innovative design means that users can depend on this tool for a variety of applications, from gardening to landscaping.

Another noteworthy characteristic of the SRTZ2401 is its anti-vibration technology, which significantly reduces user fatigue and enhances comfort during operation. This feature is particularly beneficial for professionals who spend long hours in the field, ensuring a smoother and more enjoyable experience. The ergonomic handle design further contributes to this comfort, providing a secure grip that allows for precision handling.

In terms of versatility, the Zenoah SRTZ2401 offers compatibility with various attachments, expanding its usability beyond a single function. This adaptability makes it a valuable asset for anyone in need of a multi-purpose tool. Whether users require a trimmer, edger, or blower, the SRTZ2401 can meet those needs with ease.

In summary, the Zenoah SRTZ2401 stands out for its lightweight and effective design, powerful engine, user-friendly features, and adaptability for multiple applications. This combination of characteristics makes it a top choice for those seeking quality and efficiency in their outdoor power tools. With its advanced technologies, it embodies both performance and innovation, making it a staple in the small engine market.
Top Page Image Contents