Set Up
■MOUNTING ENGINE
•Put the engine onto the clutch side end of the driveshaft assembly, making the fuel tank and the cutter head come to the same side. Attach the engine firmly with the 4 screw provided.
■INSTALLING HANDLE
•Mount the handle to the shaft tube and clamp it at your best operating position.
■INSTALLING DEBRIS GUARD
•Put the debris guard on the shaft tube near the gear box, attach it with the 2 screws and hardware provided.
■CONNECTING THROTTLE WIRE
1. Remove the air cleaner cover.
2.Connect the end of the throttle wire to the joint on the top of the carburetor.
NOTE
•When installing the cleaner cover, make sure to put the
■CONNECTING SWITCH WIRES
•Connect the switch wires between the engine and the main unit. Pair the wires of the same color.