Zenoah BC3401DL manual  21 , OPT9, How you can maintain the best control, Maintenance Blade

Page 21

Optional Blade Usage

OPT9

3.How you can maintain the best control:

a.Keep a good, firm grip on the unit with both hands. A firm grip can help neutralize bounce. Keep your right and left hands completely around the respective handles.

b.Keep both feet spread apart in a comfortable stance and yet braced for the possibility that the unit could bounce. Do not overreach. Keep firm footing and balance.

■MAINTENANCE BLADE

• Check the blade and the fasteners for looseness, cracking, or bending.

• Check the cutting edges and reform with a flat file.

Point (OPT9) :

1. Keep the end corner sharp.

2. Round the root of the edge, using round file.

3. Do not use water when using a grinder.

IMPORTANT

•It is recommended that filing should be done by professionals.

•Especially regarding filing the saw blade, Leave it to the professionals.

■TRANSPORTING THE UNIT

•When you finish cutting in one location and wish to continue work in another spot, turn off the engine, and lift up the unit and carry it paying attention fo the blade.

•Never forget to place the protective cover over the blades.

•When transporting the unit over long distances, detach the blade fix the unit by ropes.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 848-G6D-93A2 BC3401DL BC4401DWSafety First Contents  4  SpecificationsBC3401DL BC4401DW 5  Emission control label 6  Safety PrecautionsWork gear and clothing  7 Avoid Noise Problem Things to check before using your brushcutter 8  Things to check before starting up the engine 9  Things to be careful about when using your brushcutter 10   11  Set UpInstalling Cutting Head  12 Putting on Waist PAD BC4401DW only HOW to MIX Fuel When using RedMax/ZENOAH genuine oilFuel  13  14  Fueling the UnitFor Your Engine LIFE, Avoid Operation  15 Starting Engine  16   17  Optional Blade UsageOPT3 OPT4 For BC3401DL OPT5 OPT6  18 Bracket Handle Cutting Method 19  OPT7 OPT8Operation Controlling Blade Bounce  20 What causes blade thrust How you can reduce the chance of blade thrust 21  Maintenance BladeOPT9 How you can maintain the best control 22  MaintenanceRefilling Trimming Line AIR Filter 23  Storage Procedures to be Performed After Every 100 Hours of USEDisposal  24  25  Parts List 26  Drive Unit BC3401DL S/N 60200000 and up 27   28  Engine Unit BC3401DL S/N 60200000 and upDescription Part Number Qty  29  30  Drive Unit BC4401DW S/N 60200000 and up 31   32  Engine Unit BC4401DW S/N 60200000 and up 33  Limited Warranty Garantie limitée Zenoah AMERICA, INC
Top Page Image Contents