Zenoah BC3401DL manual  12 , Putting on Waist PAD BC4401DW only, Installing Cutting Head

Page 12

Set Up

■PUTTING ON WAIST PAD (BC4401DW only)

• Warp the waist pad around the shaft tube and the throttle wire.

■INSTALLING CUTTING HEAD

1.While locking the gear shaft by inserting the attached bar into the upper holder and the gear box, loosen and remove the hexagon bolt(left-handed)

2. Fit the spacer attached to the head assembly between the upper and lower holders. Then screw in the cutting head to the gear shaft over the holders. Hand- tighten it securely.

12 

Image 12

Contents BC3401DL BC4401DW 848-G6D-93A2Safety First Contents Specifications  4 BC3401DL BC4401DWEmission control label  5 Safety Precautions  6  7  Work gear and clothingThings to check before using your brushcutter Avoid Noise Problem 8  Things to check before starting up the engineThings to be careful about when using your brushcutter  9  10  Set Up  11 Installing Cutting Head  12 Putting on Waist PAD BC4401DW only When using RedMax/ZENOAH genuine oil HOW to MIX FuelFuel  13  14  Fueling the UnitFor Your Engine LIFE, Avoid Operation  15 Starting Engine  16  Optional Blade Usage  17  18  OPT3 OPT4 For BC3401DL OPT5 OPT6Bracket Handle Cutting Method 19  OPT7 OPT8Operation  20  Controlling Blade BounceWhat causes blade thrust How you can reduce the chance of blade thrustMaintenance Blade  21 OPT9 How you can maintain the best controlMaintenance  22 Refilling Trimming Line AIR Filter 23  Procedures to be Performed After Every 100 Hours of USE StorageDisposal  24 Parts List  25 Drive Unit BC3401DL S/N 60200000 and up  26  27  Engine Unit BC3401DL S/N 60200000 and up  28  29  Description Part Number QtyDrive Unit BC4401DW S/N 60200000 and up  30  31  Engine Unit BC4401DW S/N 60200000 and up  32  33  Limited Warranty Garantie limitée Zenoah AMERICA, INC