9. Maintenance
MA1
MA2
MA3
MA4
WARNING
Make sure the engine is stopped .
■DAILY CHECK POINTS
1. Air filter
Loosen the knob and remove the air cleaner cover. Take off the filter elements and tap off attached sawdust. When they are extremely dirty, shakewash with gasoline. Dry them completely before reinstalling. (MA1)
2. Oiling port
Dismount the guide bar and check the oiling port for clogging. (MA2)
(1) Oiling port
3. Guide bar
Remove sawdust in the bar groove and the oiling port. (MA3)
(1)Groove
(2)Oiling port
(Type: Sprocket nose)
Grease the nose sprocket from the feeding port on the tip of the bar. (MA4)
(1)Grease port
(2)Sprocket
4. Others
Check for fuel leakage and loose fastenings or damage to major parts, especially handle joints and guide bar mounting. If any defects are found, make sure to have them repaired before operating again
19