Zenoah G2500TS manual Releases the brake Activates the brake, Stopping Engine

7. Operation

OP10

OP11

WARNING

•When the brake operates, release the throttle lever to slow down the engine speed. Continuous operation with the brake engaged will generate heat from the clutch and may cause trouble.

•At machine inspection prior to each job, check the operating condition of the brake following the steps below.

1.Start the engine and grasp the handle securely with both hands.

2.Pulling the throttle lever to maintain the chain operation, push the brake lever (left-hand guard) down toward the front using the back of your left hand.

3.When the brake operates and the chain is stopped, release the throttle lever.

4.Release the brake.

(1)Releases the brake.

(2)Activates the brake.

■STOPPING ENGINE

1.Release the throttle lever to allow the engine idling for a few minutes

2.Put the switch to the "O" position. (OP11)

(1) Switch

15 