Zenoah G2500TS manual MA14 MA15, Inlet port of the cooling air

Page 23

9. Maintenance

MA14

MA15

Make sure every cutter has the same length and edge angles as illustrated. (MA14)

(4)Cutter length

(5)Filing angle

(6)Side plate angle

(7)Top plate cutting angle

8. Way of the cooling air

WARNING

•The engine metal parts can burn your skin. Never touch the cylinder, muffler or ignition plug etc. during operation or right after stopping the engine.

•Before starting the engine, check around the muffler and take off sawdust. If you do not, it will cause the overheating and a fire. For preventing the trouble, please keep clean around the muffler.

This engine is air-cooled. Dust clogging between the inlet port of the cooling air and cylinder fins will cause overheating of the engine. Periodically check and clean the cylinder fins after removing the air cleaner and the cylinder cover. (MA15)

(1) Inlet port of the cooling air

IMPORTANT

When installing the cylinder cover, make sure that switch wires and grommets are positioned correctly in place.

23 

Image 23

Contents T2040-93110010 G2500TSPage Contents Safety FirstParts location SpecificationsG2500TS Power unit Engine Family YKZXS.0254DEEM Symbols on the machineFor safe operation Kickback Safety Precautions for Chain SAW Users Hanger Installing guide bar and saw chainPower unit Guide bar Saw chain Plug wrench SE1 SE2 SE3 SE4SE5 SE6 Chain tension adjusting screw Loosen TightenRecommended Mixing Ratio Gasoline 32 OIL HOW to MIX FuelFuel and chain oil FuelChain OIL Starting Engine SwitchOperation OP1 OP2 OP3 OP4 OP5Checking OIL Supply Chain oil flow adjusting shaft Rich LeanOP6 OP7 OP8 Chain Brake OP10 Adjusting Carburetor OP9OP9 Stopping Engine Releases the brake Activates the brakeSA1 SawingCutting an unpillowed log SA2 SA3 Felling a Tree SA2Logging and Limbing Cutting a pillowed log SA4 SA5 SA6Daily Check Points MaintenanceMA1 MA2 MA3 MA4 Oregon Chain MA5 MA6 MA7Oregon BAR GB BARRuler Gap No gap Chain tilts MA8 MA9Chain type 91VG File size 5/32 in 4.0mm Inlet port of the cooling air MA14 MA15Gasket Spark arrester Spark arresterStorage Case 3. Oil does not come out Troubleshooting GuideCase 2. Lack of power/Poor acceleration/Rough idling Parts list G2500TS 29   30   31  Manufacturers Warranty Coverage RedMax Chainsaw Model G2500TS Year Limited WarrantyTelles sont les limites de la garantie RedMax Chainsaw Modèle G2500TS Garantie limitée à 1 ans