Zenoah G2500TS manual MA5 MA6 MA7, Oregon BAR, Gb Bar, Oregon Chain, Periodical Check Points

9. Maintenance

MA5

MA6

MA7

WARNING

This saw is equipped with one of the following low kickback bar/chain combinations:

RedMax Part Number

Bar Size	Guide Bar	Saw Chain
12inch (30cm)	G2512	91VG45X

For replacement, use only above bar and chain, or the following;

OREGON BAR

12 inch S/N DOUBLE GUARD BAR, Mount code #A041. (120 SDEA 041)

GB BAR

12 inch MINI LAMINATED BAR (PO12-50CR)

OREGON CHAIN

91VG

■PERIODICAL CHECK POINTS

1. Cylinder fins

1.Remove the starter case.

2.Remove sawdust between the cylinder fins. (MA5)

(1) Cylinder fin

2.Fuel filter

1.Using a wire hook, take out the fuel filter from the feeding port. (MA6)

2.Wash the filter with gasoline.

Replace with new one if clogged with dirt completely.

WARNING

When returning the filter, use a pinch not to be folded the suction pipe.

3.Oil filter

1.With a wire hook, take out the oil filter from the feeding port. (MA7)

2.Wash the filter with gasoline.

20 