5. Installing guide bar and saw chain
SE5
SE6
6.While holding up the tip of the bar,adjust the chain tension by turning the tensioner screw until the tie straps just touch the bottom side of the bar rail. (SE5)
(1)Chain tension adjusting screw
(a) Loosen
(b) Tighten
7.Tighten the mounting nut securely with the bar tip held up (TORQUE: 11.8~14.7 N.m./120~150
(1) Tighten
WARNING
It is very important to maintain the proper chain tension. Rapid wear of the guide bar or the chain coming off easily can be caused by improper tension. Especially when using a new chain, take good care of it since it should expand when first used.
9