Zenoah HEZ2602S manual Limited Warranty

Page 53

RedMax

LIMITED WARRANTY

EMISSION-RELATED PARTS, FOR TWO (2) YEARS FROM THE DATE OF ORIGINAL DELIVERY OF THE UNIT,

RedMax / KOMATSU ZENOAH AMERICA, INC., THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL AND EACH SUBSEQUENT PURCHASER, ANY PART OR PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP.

EMISSION-RELATED PARTS ARE:

THE CARBURETOR ASSEMBLY, COIL ASSEMBLY, ROTOR, SPARKPLUG,

AIR FILTER, FUEL FILTER, INTAKE MANIFOLD, AND THE GASKETS

ALL OTHER PARTS EXCEPT ABOVE PARTS, FOR TWO (2) YEARS OF USE, 90 DAYS FOR RENTAL USE, FROM THE DATE OF ORIGINAL PURCHASE, THE COMPANY, THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL PURCHASER, ANY PART OF PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP. THIS IS THE EXCLUSIVE REMEDY.

THE PURCHASER SHALL BEAR COSTS OF TRANSPORTING THE UNIT TO AND FROM THE RedMax DEALER.

THE PURCHASER SHALL NOT BE CHARGED FOR DIAGNOSTIC LABOR WHICH LEADS TO THE DETERMINATION THAT A WARRANTED PART IS DEFECTIVE, IF THE DIAGNOSTIC WORK IS PERFORMED AT THE RedMax DEALER.

THE PURCHASER OR OWNER IS RESPONSIBLE FOR THE PERFORMANCE OF THE REQUIRED MAINTENANCE AS DEFINED BY THE MANUFACTURER IN THE OWNER/OPERATOR MANUAL.

ANY WARRANTED PART WHICH IS NOT SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE, OR WHICH IS SCHEDULED ONLY FOR REGULAR INSPECTION TO THE EFFECT OF "REPAIR OR REPLACE AS NECESSARY" SHALL BE WARRANTED FOR THE WARRANTY PERIOD. ANY WARRANTED PART WHICH IS SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE SHALL BE WARRANTED FOR THE PERIOD OF TIME UP TO THE FIRST SCHEDULED REPLACEMENT POINT FOR THE PART.

ANY REPLACEMENT PART THAT IS EQUIVALENT IN PERFORMANCE AND DURABILITY MAY BE USED IN NON- WARRANTY MAINTENANCE OR REPAIRS, AND SHALL NOT REDUCE THE WARRANTY OBLIGATION OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO OTHER ENGINE COMPONENTS CAUSED BY THE FAILURE OF A WARRANTED PART STILL UNDER WARRANTY.

THE WARRANTY DOES NOT APPLY TO THOSE UNITS WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF INSTRUCTION LISTED IN THE OWNER/OPERATOR MANUAL FOR PROPER USE AND MAINTENANCE OF THE UNITS, ACCIDENTAL MISHANDLING, ALTERATION, ABUSE, IMPROPER LUBRICATION, USE OF ANY PARTS OR ACCESSORIES OTHER THAN THOSE SPECIFIED BY THE COMPANY, OR OTHER CAUSES BEYOND THE COMPANY'S CONTROL.

THIS WARRANTY DOES NOT COVER THOSE PARTS REPLACED BY NORMAL WEAR OR HARMLESS CHANGES IN THEIR APPEARANCE.

THERE ARE NO OTHER EXPRESS WARRANTIES.

IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO TWO (2) YEARS OF USE FROM THE ORIGINAL DELIVERY DATE.

LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE UNDER ANY AND ALL WARRANTIES ARE EXCLUDED.

SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

IF YOU NEED TO OBTAIN INFORMATION ABOUT THE NEAREST SERVICE CENTER, PLEASE CALL RedMax / KOMATSU ZENOAH AMERICA, INC. AT (770)-381-5147.

IMPORTANT: YOU WILL RECEIVE A WARRANTY REGISTRATION CARD AT TIME OF PURCHASE.PLEASE FILL

OUT THE CARD AND SEND IT TO RedMax / KOMATSU ZENOAH AMERICA WITHIN SEVEN (7) DAYS. BE SURE TO KEEP A COPY FOR YOUR RECORDS.

KOMATSU ZENOAH AMERICA INC.

4344 Shackleford Road Suite 500

Norcross, Georgia 30093

Page 52 Page 54
Image 53
Page 52 Page 54
Contents HEZ2602S Contents Advertencias Contenidas EN EL Manual Differents Types D’AVERTISSEMENT DE CE Mode D’EMPLOITables des matieres Contenido Parts location SpecificationsFiche technique Emplacement des pieces Situación de las piezasEspecificaciohes HEZ2602SEmission Control Symbols on the machinePosition Control DE Emisiones EmplacementPosición Working Circumstance For safe operationWorking Condition Conditions DE Travail Consignes de securite Instrucciones de seguridadCondiciones DE Trabajo PrecaucionesBefore Starting the Engine Working PlanPlan DE Trabajo Plan DE TravailDE LA Machine Avant DE Mettre LE Moteur EN MarcheStarting the Engine Using the ProductUtilisation DE LA Machine USO DEL Producto Demarrage DU MoteurArranque DEL Motor If Someone Comes MaintenanceEntretien SI QUELQU’UN S’APPROCHESI Alguien SE Aproxima MantenimientoTransportation Handling FuelRefill after cooling the engine Transport Manipulation DU CarburantManipulación DEL Combustible Llenar una vez que el motor se haya enfriadoSE1 Mounting Other Parts Set upScrew Clamp bolt Tightning Torque 70~130 in-lb 8~15 N.m SE2Montage D’AUTRES Pieces Montaje DE Otras Partes Assemblage MontajeRecommended Mixing Ratio Gasoline 50OIL When using Zenoah genuine oilFuel Carburant Combustible Rapport DE Melange Recommande Essence 50 HuileLors de l’utilisation de la véritable huile Zenoah Proporción DE LA Mezcla Recomendada Gasolina 50 AceiteFor Your Engine LIFE, Avoid HOW to MIX FuelFueling the Unit Remplissage DU Reservoir Comment Obtenir UN BON Melange Como Mezclar EL CombustibleEviter Pour Prolonger LA Duree DE VIE DU Moteur Abastecimiento DE LA UnidadFuel Aceite Para USO EN Motores DE 4-TIEMPOS Operation Adjusting Wheel HeightOP1 OP2 OP3 OP4Couple de serrage 51~68 in-lbs 6~8 N.m Fonctionnement UsoPar de torsión de apriete 51~68 in-lbs 6~8 N.m Mise EN Marche DU MoteurAdjusting Idling Speed OP7 Adjusting Throttle CableOP5 OP6 OP7Reglage Câble D’ACCÉLÉRATEUR Arret DU Moteur OP4Reglage DU Ralenti OP7 Cómo Parar EL Motor OP4OP8 HOW to USEComment Utiliser LE COUPE-BORDURES Como Usar Remarque NotaBe Sure to Check the Following Before Using Your Stick Edger MaintenanceMantenimiento EntretienMaintenance Chart Tabla DE Mantenimiento MantenimientoTableau D’ENTRETIEN MA1 MA2 MA3 Replacement Plug is a NGK CMR7HAIR Filter Fuel FilterEntretien Mantenimiento Spark Arrester Muffler MA4 MA5Spark arrester Gear CasePARE-ETINCELLES Caja DE CambiosCarter D’ENGRENAGE ParachispasCylinder Intake air cooling vent back MA6 Blade MA6Intake AIR Cooling Vent MA7 Toma DE Aire DE Refrigeración Ouïe DU Refroidissement PAR AIRStorage MA9 Procedures to be Performed After Every 100 Hours of USEMA8 Protector Protector BoltEntretien Mantenimiento Procedure a Effectuer Toutes LES Heures D’UTILISATIONRangement Almacenamiento Protecteur ProtectorGuide de localisation des pannes Troubleshooting guide11. Guía de localización y solución de problemas Nota HEZ2602SParts list Pipe Comp Engine Unit HEZ2602S S/N 60800001 and up Cylinder Owner’s warranty responsibilities Manufacturer’s warranty coverageObligations du propriétaire liées à la garantie Couverture de la garantie constructeurResponsabilidades del propietario Cobertura de la garantía dada por el fabricanteLimited Warranty RedMax Garantie limitée Garantía Limitada Komatsu Zenoah America INC

HEZ2602S specifications

The Zenoah HEZ2602S is a versatile and high-performance handheld power tool that excels in various outdoor maintenance tasks. Designed for both professionals and homeowners, this robust machine stands out in the market for its advanced features, technology, and reliability.

One of the primary features of the Zenoah HEZ2602S is its powerful engine. Equipped with a 26cc two-stroke engine, it delivers impressive power while maintaining fuel efficiency. This engine is engineered to provide optimal torque and speed, allowing users to tackle tough jobs with ease. Additionally, the machine features a low-emission system that complies with environmental regulations, making it a responsible choice for eco-conscious users.

The HEZ2602S is known for its lightweight design, which enhances maneuverability and reduces user fatigue during prolonged use. Weighing in at just 5.5 kg, this tool is easy to handle, making it suitable for both detailed tasks and larger areas. The ergonomic handle design contributes to comfort, granting users better control and reducing vibrations.

Another significant characteristic of the Zenoah HEZ2602S is its technologically advanced starting system. The machine is equipped with an easy start feature that allows users to start the engine with minimal effort. This technology significantly reduces the amount of pull force required, ensuring that the tool is ready to go when you are.

The HEZ2602S is a multi-functional tool, compatible with various attachments, including grass trimmers, brush cutters, and hedge trimmers. This versatility allows users to switch between tasks seamlessly, making it an essential tool for gardening, landscaping, and maintenance work.

Durability is also a key characteristic of the Zenoah HEZ2602S. Built with high-quality materials and components, it is designed to withstand the rigors of outdoor use. The robust construction ensures a long service life, providing excellent value for investment.

In summary, the Zenoah HEZ2602S is a powerful, lightweight, and versatile handheld power tool that offers excellent performance for various outdoor tasks. With its advanced engine technology, easy starting system, and compatibility with multiple attachments, it is well-suited for both professional landscapers and DIY enthusiasts. Its durable build and ergonomic design further cement its status as a reliable choice for outdoor maintenance.
Top Page Image Contents