Troy-Bilt 682J, E686N, E682L Features and Controls, Wheel Speed Lever, Tines/PTO Clutch Lever

Page 12

Section 3: Features and Controls

Verify Position of Clutch Roller

When you shift between FORWARD, NEUTRAL and REVERSE, the clutch roller at the base of the Wheels/Tines/PTO Drive Lever should be positioned as shown in Figures 3-2, 3-3 and 3-4. Verify the position of the clutch roller as you shift the lever. If it is not positioned correctly, contact the Factory or see your local authorized dealer.

G

H

Figure 3-2: FORWARD position; roller

(G) rests under the adjustment block (H).

G

H

Figure 3-3: NEUTRAL position; roller

(G)rests against middle area of the ad- justment block (H).

G

H

Figure 3-4: REVERSE position; roller

(G)rests against upper area of the ad- justment block (H).

If both Forward Interlock Levers are released before first returning the Wheels/Tines/PTO Drive Lever to NEUTRAL, the engine will stop.

IMPORTANT: The Forward Interlock Levers are a safety control that stops the engine should you lose control while going forward and cannot shift into

NEUTRAL.

Wheel Speed Lever

Use the Wheel Speed Lever (C, Fig. 3-1) to select one of three operating positions: SLOW, FAST or FREEWHEEL.

•SLOW – Lever moved all the way down. Most effective for normal tilling or for low-speed transport.

•FAST – Lever moved all the way up. Most effective for cultivating or for fast- speed transport.

•FREEWHEEL – Lever in between SLOW and FAST (wheels will roll freely). Used when transporting the machine on level ground without engine power, and when using stationary PTO attachments.

IMPORTANT: To avoid transmission damage, always move Wheels/Tines/PTO Drive Lever into NEUTRAL before shifting the Wheel Speed Lever.

IMPORTANT: When shifting into SLOW or FAST, gently roll the machine forward or backward to help fully engage the wheel gears. When engaged, the wheels will not turn unless the engine is running and the Wheels/Tines/PTO Drive Lever is engaged in FORWARD or REVERSE.

Tines/PTO Clutch Lever

Use this lever (D, Figure 3-1) to engage or disengage power from the transmission PTO clutch to the tines or any PTO attach- ment. This control has two operating positions: ENGAGE and DISENGAGE.

•ENGAGE – Lever moved into detent slot farthest from engine. Use this position to operate tines or other PTO attachments. After shifting to ENGAGE, briefly operate machine in FORWARD to help fully engage the PTO clutch.

•DISENGAGE – Lever moved into detent slot nearest engine. Use this position to disengage power to tines or other PTO attachments before transporting, loading, turning, or operating in reverse.

IMPORTANT: To avoid transmission damage, always move the Wheels/Tines/ PTO Drive Lever into NEUTRAL before shifting the Tines/PTO Clutch Lever.

Depth Regulator Lever

Use this lever (E, Figure 3-1) to regulate the tilling depth of the tines. This control also has a TRAVEL position, which enables transport with the tines off the ground.

To operate the lever, lift up on the handle- bars, pull the Depth Regulator Lever straight back, and then slide it up or down to one of the eight detent height settings.

The eight detent positions offer a range of tine height settings. This enables you to select the height that is most effective for a particular condition. The top detent position is the TRAVEL setting. Use the second or third detent from the top for shallow tilling and cultivating. Use the other detents for deeper tilling and for power composting.

WARNING

To avoid personal injury, always place the tines in the TRAVEL position before starting the engine. This prevents the tines from touching the ground until you are ready to begin tilling.

Handlebar Height Adjustment Lever

Use this lever (F, Figure 3-1) to adjust the handlebars to one of two height settings.

1.To change the height, hold the handle- bars with one hand and loosen the lever in a counterclockwise direction.

2.Move the handlebars to one of the two preset height settings.

3.Retighten the lever.

NOTE: You can swap the positions of the inside handlebar ratchets to change the two preset settings by approximately four inches higher or lower. See Section 2, Step 2: Attach Handlebar for detailed assembly information.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Operator’s Manual Table of Contents Safety Safety Alert SymbolSafety Keep children and pets awayUse slower wheel, tine and engine speeds Maintenance and Storage Operating SymbolsTools/Materials Needed for Assembly IntroductionInspect Unit Attach HandlebarAssembly Move Tiller Off Shipping PlatformCheck Gear Oil Levels Remove the temporary screw J, FigureAdjust Air Pressure in Tires Attach Engine Throttle Lever and CableAdd Motor Oil to Engine Oil Level HoleInstall Battery Cables Connect the Wire Harness ReceptacleTo Avoid Personal Injury or Property Damage Never bring a gas can near the positivePTO Attachments Feature Wheels/Tines/PTO Drive LeverForward Interlock Levers EngineFeatures and Controls Handlebar Height Adjustment LeverWheel Speed Lever Tines/PTO Clutch LeverKeyswitch Starter Engine Controls Engine Throttle LeverMove the engine Throttle lever to Stop position Following steps describe how to start and stop the engine Pre-Start ChecklistBreak-In Operation Starting and Stopping the EngineOperation Move engine throttle lever -2 away from StopCold Weather Operation Operating the TillerStopping the Engine and Tiller Moving the Tiller Forward and TillingMoving the Tiller in Reverse Stopping Reverse MotionTo Stop the Engine Making TurnsTesting the Forward Interlock Safety System How to Check the Interlock SystemLoading and Unloading the Tiller Transporting The Tiller Around Your PropertyChanging Speed Belts Loading the TillerUnloading the Tiller Changing Belt From LOW Range to High RangeChoosing Wheel Tine Speeds Changing Belt From High Range to LOW RangeMove the Wheels/Tines/PTO Drive Lever into Neutral Go to right side of tiller and finish seating the beltLet the tiller do the work Tilling depthsAvoid tilling wet, soggy soil To help avoid personal injury, be awareAvoid making footprints Suggested tilling patternsTilling on slopes Tilling up and down slopesClearing the tines Terrace GardeningWide-Row Planting Tilling Under CornSoil Enrichment Idea Removing And Replacing The Tine Attachment Removing Tine AttachmentMove the tiller to level ground Place Wheel Speed Lever into Free Wheel FigureInstalling the Tine Attachment Setting Up Stationary AttachmentsGuide Pin Mounting Hole Move the two swing-bolts intoSetting Up Non-Powered Attach- ments Starting The EngineOperating Stationary Attachments Stopping the EngineEvery HoursMaintenance Tighten Bolts and NutsTiller Lubrication Transmission Gear Oil Maintenance Checking the Power Unit Oil LevelChecking for Oil Leaks Checking Gear Oil LevelsAdding or Changing Gear Oil Checking the Tine Attachment Oil LevelFor Dipsticks With Hot/Cold Markings If the level is incorrect, see Adding or Changing Gear OilAdding Gear Oil to PTO Power Unit Transmission Draining and Filling PTO Power Unit TransmissionAdding Gear Oil to the Tine Attachment Transmission Draining and Filling the Tine Attachment TransmissionDrive Belt Maintenance Measuring and Adjusting Drive Belt TensionHow to Measure Belt Tension Belt Adjustment ToolReplacing the Drive Belt Removing the BeltReplacing the Drive Belt Reverse Drive System Maintenance Reverse Disc InspectionChecking and Adjusting Reverse the Drive System Installing a New Reverse DiscChecking and Adjusting Reverse Disc Replacing the Reverse DiscBolo Tine Maintenance Adjusting Reverse DriveChecking Tines for Wear Single Tine Replacement Removing and Replacing a Tine Holder AssemblyRemoving Tine Holder Assembly Replacing Tines Holder AssemblyTine Shaft Maintenance Tire and Wheel MaintenanceAir Cleaner Maintenance Spark Plug MaintenanceInspecting Forward Interlock Wiring System Testing the Forward Interlock Wiring SystemStoring Your Tiller Appendix a Troubleshooting Troubleshooting ProceduresLinkage EccentricTiller Pulls To One Side Row Marker Attachment 290-258-081 290-257-081Dozer/Snow Blade Attachment Wrap-Around Bumper GuardPage TROY-BILT Tiller Lifetime Limited Warranty

682J, E686N, E682L specifications

The Troy-Bilt brand is widely recognized for its reliable outdoor power equipment, including a line of innovative lawn tractors. Among these, the Troy-Bilt 682J, E686N, and E682L stand out for their exceptional performance and user-friendly features, catering to various lawn care needs.

The Troy-Bilt 682J is a robust lawn tractor designed for efficiency and ease of use. Its 19 HP engine provides ample power for handling various landscaping tasks, while the 42-inch cutting deck allows for a wide cutting path, making quick work of mowing larger yards. The tractor boasts a six-speed transmission, enabling users to select the speed that best suits their mowing conditions. Additionally, the 682J features an ergonomic seat and steering for comfort during extended use, making it a solid choice for homeowners with medium to large properties.

The Troy-Bilt E686N takes things a step further with its advanced technology. This model integrates a 20 HP engine and a larger 46-inch cutting deck, enhancing productivity significantly. The E686N is equipped with a hydrostatic transmission, offering smooth operation and easier control, allowing users to maneuver around obstacles with precision. One of its standout features is the Easy Change Oil Kit, which simplifies maintenance, ensuring that the engine runs smoothly for longer periods. The inclusion of a washout port on the deck makes cleaning effortless, promoting better lawn health and equipment longevity.

For those seeking a more compact option, the Troy-Bilt E682L delivers reliable performance in a smaller package. This model features a 19 HP engine paired with a 38-inch cutting deck, perfect for navigating tighter spaces without compromising power. Its tight turning radius enhances maneuverability, making it ideal for suburban lawns with landscaping features and garden beds. The E682L is designed with user comfort in mind, featuring an adjustable seat and simple controls for intuitive operation.

In summary, the Troy-Bilt 682J, E686N, and E682L represent a dynamic trio of lawn tractors, each catering to various homeowner needs. With powerful engines, efficient cutting decks, and user-friendly features, these models are built to enhance the mowing experience. With their proven reliability and advanced technologies, Troy-Bilt tractors make maintaining a beautiful lawn a manageable task for anyone.
Top Page Image Contents