Land Pride RTR0550 Operator’s Responsibilities, General Notes for Field Operations, Operating

Page 17

Land Pride

Section 2: Operating

Table of Contents

Operator’s Responsibilities

!WARNING

It is the operator’s responsibility not to allow anyone near the tiller during its operation.

•All nuts, bolts, screws, and fasteners should be checked periodically for tightness. Refer to the Torque Value Chart in the “Appendix” section on page 26.

•Do not alter the tiller in a way which will adversely affects its performance or reliability or use the tiller for a purpose for which it was not designed.

!WARNING

Do not till on inclines exceeding 15 degrees. The action of the tines being forced down into the ground can cause tractor roll-over on steep inclines.

!CAUTION

Be sure that you are not working over any underground wiring, pipes, or other obstructions. If there is any doubt, call your public service agency.

!DANGER

Make all hydraulic adjustments from the tractor seat. Never make adjustments while standing along side the tractor or behind the tractor.

!DANGER

Clear the area of debris before tilling. Blade impact on objects not seen can cause projectiles resulting in bodily injury or death.

•Follow all directions on the safety labels.

•Make sure all safety labels are in their proper location and in good condition before operation.

•Do not allow anyone to operate this tiller who has not been properly trained in its safe operation.

•Do not let anyone under the age of 16 operate the tiller.

•Use the tiller for its intended purpose only.

•Never carry passengers or use the tiller as a wagon to carry things.

•Never use the tiller to pull or tow other equipment or objects.

•Do not operate the tiller with the front rubber dirt deflector removed.

•Do not operate the tiller in the raised position.

•Never work under the unit without properly blocking the unit up.

•Clear the area of debris before tilling.

•Before working the soil contact your local utility services, so that they may mark the location of any under ground utility services in the area. Be sure to ask how close you can work to the marks or flags they positioned.

General Notes for Field Operations

!CAUTION

Do not over speed PTO or machine damage may result. This tiller is designed to be used with a tractor using a 540 rpm rear PTO.

Before beginning to till, the following inspection should be performed:

1.Check oil level in gearbox and chaincase. Refer to the Lubrication portion of the “Maintenance and Lubrication” section on page 21.

2.Check that all plugs have been replaced properly in the gearbox and chaincase.

3.Be sure all tiller tines, bolts and nuts are tight.

4.Be certain all guards, shields and dirt deflectors are in place and secure.

5.Grease PTO shaft and all other grease fittings. Refer to the Lubrication portion of the “Maintenance and Lubrication” section on page 21.

6.Clear the area to be tilled of rocks, branches and other foreign objects.

7.Tall grass and weeds should be mowed before tilling.

8.Operate with 540 rpm PTO tractor.

9.At first begin tilling at a slow forward speed and shift up as ground conditions warrant.

10.Tiller should be operated with the tiller deck level to the ground.

11.Tiller tines will cut better when operating the tractor at full 540 rpm PTO speed than at reduced throttle.

12.Do not engage PTO at full throttle.

13.Tilling should not be done in wet conditions as soil will stick to tines.

14.After tilling the first 50 feet, stop and check to see that the tiller is adjusted properly.

15.Do not make turns or attempt to back up while tiller is in the ground. See important note below.

IMPORTANT: Turning or backing up with rotary tines in the ground will damage the tiller.

16.Do not engage PTO with machine in the fully raised or lowered position.

17.Periodically check for foreign objects wrapped around the rotor shaft and remove them after disengaging PTO, turning off tractor engine and removing ignition key.

8/27/08

RTR0542 and RTR0550 Rotary Tillers 311-464M

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Rotary Tillers Table of Contents Be Aware Signal Words Important Safety InformationFor Your Protection Shutdown and StorageTransport Machinery Safely Use Safety Lights and DevicesPractice Safe Maintenance Avoid High Pressure Fluids Hazard Prepare for EmergenciesWear Protective Equipment Reference RTR0542 Shown & RTR0550 818-171CReference RTR0542 & RTR0550 Shown 818-284C 818-142CReference RTR0542 Reference RTR0550818-130C 818-552C818-543C Reference RTR0542 & RTR0550 818-540CApplication Using This ManualOwner Assistance IntroductionTractor Requirements Assembly and Set-UpDealer Preparations Hitch Assembly Support Stand AdjustmentPoint Category I-Limited Hitch Tractor Hook-UpPoint Category 0 Hitch Support Stand Storage Point Category I HitchPoint Hitch Checks Point Category I Quick HitchRefer to -10& Figure Driveline InstallationDriveline Shortening Operating Operator’s ResponsibilitiesGeneral Notes for Field Operations Parking Operating Check ListTransporting General Operating Instructions Drive Chain Tension Adjustment Point Hitch AdjustmentRear Deflector Adjustment Skid Shoe AdjustmentTine Replacement MaintenanceMaintenance and Lubrication Clutch Run-InClutch Assembly Clutch DisassemblyStorage InspectionHrs LubricationGearbox Bearing On Right End Of Rotor ShaftModel RTR0542 RTR0550 Specifications & CapacitiesRTR05 Series Features Benefits Features and BenefitsProblem Cause Solution TroubleshootingIn-tpi1 Ft-lb3 · m · m ft-lb Torque Values Chart for Common Bolt SizesAppendix Tines and Driveline Friction Discs Considered wear items WarrantyOverall Unit and Driveline One year Parts and Labor Corporate Office P.O. Box Salina, Kansas 67402-5060 USA

RTR0550, RTR0542 specifications

Land Pride RTR0542 and RTR0550 are leading models in the realm of rotary tillers, designed to cater to the needs of both agricultural professionals and avid gardeners. With their robust construction and advanced features, these tillers provide efficient soil preparation and cultivation for a variety of applications.

The RTR0542 and RTR0550 models come equipped with high-quality, heat-treated tines that enhance durability and longevity. These tines are engineered for maximum soil penetration and effective tilling, ensuring that the soil is thoroughly mixed and aerated. With a tilling width of 42 inches for the RTR0542 and 50 inches for the RTR0550, these tillers allow users to cover larger areas in less time, making them highly efficient for both large-scale farming and home gardening projects.

One of the standout features of both models is their adjustable side skids. These allow operators to customize the depth of the tilling process, adapting to different soil conditions or planting requirements. This flexibility is essential for optimal seedbed preparation, making the rotary tillers suitable for a wide range of crops, from vegetables to flowers.

The RTR0542 and RTR0550 are built with a sturdy, heavy-duty frame that ensures stability and alignment during operation. This robust construction not only enhances performance but also minimizes wear and tear, further extending the lifespan of the equipment. Additionally, the tillers come with a shielded chain drive system that reduces noise and maintenance needs, offering operators a quieter and more efficient working experience.

Both models feature a quick-hitch compatibility, allowing for easy and efficient attachment to a range of tractors. This convenient design enables users to switch between implements without the need for extensive equipment changes, enhancing productivity and versatility on the farm or in the garden.

Safety is also a priority in the design of RTR0542 and RTR0550. They are equipped with safety shields that protect operators from flying debris while working. The inclusion of durable bearings helps to reduce vibrations, ensuring a smoother operation and improved user comfort.

In summary, Land Pride RTR0542 and RTR0550 rotary tillers offer an impressive combination of durability, efficiency, and versatility. With their advanced features and technologies, these tillers are ideal for anyone looking to achieve superior soil preparation and cultivation for successful planting and gardening endeavors. Whether you are a commercial farmer or a backyard gardener, these models can meet diverse soil management needs effectively.
Top Page Image Contents