Land Pride RTR0550 manual Important Safety Information, Be Aware Signal Words, For Your Protection

Page 3

Land Pride

Important Safety Information

Table of Contents

These are common practices that may or may not be applicable to the products described in this manual.

Safety at All Times

Thoroughly read and understand the instructions given in this manual before operation. Refer to the “Safety Label” section, read all instructions noted on them.

Do not allow anyone to operate this equipment who has not fully read and comprehended this manual and who has not been properly trained in the safe operation of the equipment.

Look For The Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a

!safety precaution must be taken. When you see this symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in

the operation, transport, maintenance and storage of equipment.potential hazard to personal safety involved and extra

▲ Operator should be familiar with

all functions of the unit.

▲ Operate implement from the

driver’s seat only.

▲ Make sure all guards and shields

are in place and secured before

operating implement.

▲ Do not leave tractor or implement

unattended with engine running.

▲ Dismounting from a moving

tractor could cause serious injury

or death.

▲ Do not allow anyone to stand

between the tractor and

implement while backing up to the

implement.

▲ Keep hands, feet, and clothing

away from power-driven parts.

▲ Wear snug fitting clothing to avoid

entanglement with moving parts.

▲ Watch out for wires, trees, etc.,

Be Aware of

Signal Words

A Signal word designates a degree or level of hazard seriousness. The signal words are:

!DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.

!WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.

!CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

when raising implement. Make

sure all persons are clear of

working area.

▲ Turning tractor too tight may

cause implement to ride up on

wheels. This could result in injury

or equipment damage.

▲ Do not carry passengers on

implement at any time.

For Your Protection

▲Thoroughly read and understand the “Safety Label” section, read all instructions noted on them.

Shutdown and Storage

▲Lower machine to ground, put tractor in park, turn off engine, and remove the key.

▲Detach and store implements in a area where children normally do not play. Secure implement by using blocks and supports.

OFF

8/27/08

RTR0542 and RTR0550 Rotary Tillers 311-464M

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Rotary Tillers Table of Contents Shutdown and Storage Important Safety InformationBe Aware Signal Words For Your ProtectionUse Safety Lights and Devices Practice Safe MaintenanceTransport Machinery Safely Prepare for Emergencies Wear Protective EquipmentAvoid High Pressure Fluids Hazard 818-171C Reference RTR0542 & RTR0550 ShownReference RTR0542 Shown & RTR0550 Reference RTR0550 818-142C818-284C Reference RTR0542818-552C 818-543C818-130C Reference RTR0542 & RTR0550 818-540CIntroduction Using This ManualApplication Owner AssistanceAssembly and Set-Up Dealer PreparationsTractor Requirements Hitch Assembly Support Stand AdjustmentTractor Hook-Up Point Category 0 HitchPoint Category I-Limited Hitch Point Category I Quick Hitch Point Category I HitchSupport Stand Storage Point Hitch ChecksRefer to -10& Figure Driveline InstallationDriveline Shortening Operator’s Responsibilities General Notes for Field OperationsOperating Operating Check List TransportingParking General Operating Instructions Skid Shoe Adjustment Point Hitch AdjustmentDrive Chain Tension Adjustment Rear Deflector AdjustmentClutch Run-In MaintenanceTine Replacement Maintenance and LubricationInspection Clutch DisassemblyClutch Assembly StorageHrs LubricationGearbox Bearing On Right End Of Rotor ShaftSpecifications & Capacities RTR05 SeriesModel RTR0542 RTR0550 Features Benefits Features and BenefitsProblem Cause Solution TroubleshootingTorque Values Chart for Common Bolt Sizes AppendixIn-tpi1 Ft-lb3 · m · m ft-lb Warranty Overall Unit and Driveline One year Parts and LaborTines and Driveline Friction Discs Considered wear items Corporate Office P.O. Box Salina, Kansas 67402-5060 USA

RTR0550, RTR0542 specifications

Land Pride RTR0542 and RTR0550 are leading models in the realm of rotary tillers, designed to cater to the needs of both agricultural professionals and avid gardeners. With their robust construction and advanced features, these tillers provide efficient soil preparation and cultivation for a variety of applications.

The RTR0542 and RTR0550 models come equipped with high-quality, heat-treated tines that enhance durability and longevity. These tines are engineered for maximum soil penetration and effective tilling, ensuring that the soil is thoroughly mixed and aerated. With a tilling width of 42 inches for the RTR0542 and 50 inches for the RTR0550, these tillers allow users to cover larger areas in less time, making them highly efficient for both large-scale farming and home gardening projects.

One of the standout features of both models is their adjustable side skids. These allow operators to customize the depth of the tilling process, adapting to different soil conditions or planting requirements. This flexibility is essential for optimal seedbed preparation, making the rotary tillers suitable for a wide range of crops, from vegetables to flowers.

The RTR0542 and RTR0550 are built with a sturdy, heavy-duty frame that ensures stability and alignment during operation. This robust construction not only enhances performance but also minimizes wear and tear, further extending the lifespan of the equipment. Additionally, the tillers come with a shielded chain drive system that reduces noise and maintenance needs, offering operators a quieter and more efficient working experience.

Both models feature a quick-hitch compatibility, allowing for easy and efficient attachment to a range of tractors. This convenient design enables users to switch between implements without the need for extensive equipment changes, enhancing productivity and versatility on the farm or in the garden.

Safety is also a priority in the design of RTR0542 and RTR0550. They are equipped with safety shields that protect operators from flying debris while working. The inclusion of durable bearings helps to reduce vibrations, ensuring a smoother operation and improved user comfort.

In summary, Land Pride RTR0542 and RTR0550 rotary tillers offer an impressive combination of durability, efficiency, and versatility. With their advanced features and technologies, these tillers are ideal for anyone looking to achieve superior soil preparation and cultivation for successful planting and gardening endeavors. Whether you are a commercial farmer or a backyard gardener, these models can meet diverse soil management needs effectively.
Top Page Image Contents