Land Pride RTR0550 manual Tractor Hook-Up, Point Category 0 Hitch, Point Category I-Limited Hitch

Page 13

Land Pride

Table of Contents

Section 1: Assembly and Set-Up

Tractor Hook-Up

Refer to Figure 1-4:

!DANGER

Tractor hook-up to equipment is dangerous and can result in serious injury or death. Do not allow anyone to stand between the tiller and tractor during hook-up operations. Do not operate the hydraulic 3-point lift controls while someone is directly behind the tractor or near the tiller.

13809

Tractor 3-Point Hitch

Figure 1-4

Refer to Figure 1-4:

For proper hitch configuration determine the hitch category for the tractor being used.

1.Category 0 tractors have 5/8” diameter hitch link holes in the center and lower hitch arms.

2.Category I-Limitedtractors have a 7/8” diameter lower hitch link holes and either 5/8” or 3/4” diameter top center link hole. The lower arms are spaced closer together than a Category I hitch.

3.Category I tractors have a 7/8” diameter lower hitch link holes and 3/4” diameter top center link hole.

The lower 3-point arms must be stabilized to prevent side-to-side movement. Most tractors have sway blocks or adjustable chains for this purpose.

3-Point Category 0 Hitch

Refer to Figure 1-5:

1.Remove the two inside 1/4” linch pins (#1) and hitch pins (#2). Remove hitch pin bushings (#3) and keep for future use with Category I-Limited and Category I tractor hook-ups.

2.Slowly back the tractor up to tiller until the lower 3-point arms are aligned with the inside hitch clevises on the tiller as shown.

3.Replace the lower hitch pins and replace the two 1/4” linch pins.

4.Attach the tractor’s top center ink to the tiller’s lower 5/8” hitch holes using a 5/8" diameter hitch pin. Properly secure hitch pin with a linch pin.(Center hitch pin and linch pin are supplied by the customer).

23792

Hitch Point For 3-Point Center Arm

Inside Hitch Clevises For Hitching to the Tractor’s Lower 3-Point

3-Point Category 0 Hitch

Figure 1-5

3-Point Category I-Limited Hitch

Refer to Figure 1-6:

1.Remove the two inside 1/4” linch pins (#1) and hitch pins (#2). Do not remove the hitch pin bushings (#3) from the hitch pins (#2).

2.Slowly back the tractor up to tiller until the lower 3-point arms are aligned with the inside hitch clevises on the tiller as shown.

 

Hitch Location For 5/8”

 

Hitch Location For 3/4”

 

3-Point Center Hitch Pin

 

3-Point Center Hitch Pin

 

 

 

 

Inside Hitch Clevises For Hitching to the Tractor’s Lower 3-Point Arms.

23775

3-Point Category I-Limited Hitch

Figure 1-6

8/27/08

RTR0542 and RTR0550 Rotary Tillers 311-464M

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Rotary Tillers Table of Contents Be Aware Signal Words Important Safety InformationFor Your Protection Shutdown and StoragePractice Safe Maintenance Use Safety Lights and DevicesTransport Machinery Safely Wear Protective Equipment Prepare for EmergenciesAvoid High Pressure Fluids Hazard Reference RTR0542 & RTR0550 Shown 818-171CReference RTR0542 Shown & RTR0550 818-284C 818-142CReference RTR0542 Reference RTR0550818-543C 818-552C818-130C Reference RTR0542 & RTR0550 818-540CApplication Using This ManualOwner Assistance IntroductionDealer Preparations Assembly and Set-UpTractor Requirements Hitch Assembly Support Stand AdjustmentPoint Category 0 Hitch Tractor Hook-UpPoint Category I-Limited Hitch Support Stand Storage Point Category I HitchPoint Hitch Checks Point Category I Quick HitchRefer to -10& Figure Driveline InstallationDriveline Shortening General Notes for Field Operations Operator’s ResponsibilitiesOperating Transporting Operating Check ListParking General Operating Instructions Drive Chain Tension Adjustment Point Hitch AdjustmentRear Deflector Adjustment Skid Shoe AdjustmentTine Replacement MaintenanceMaintenance and Lubrication Clutch Run-InClutch Assembly Clutch DisassemblyStorage InspectionHrs LubricationGearbox Bearing On Right End Of Rotor ShaftRTR05 Series Specifications & CapacitiesModel RTR0542 RTR0550 Features Benefits Features and BenefitsProblem Cause Solution TroubleshootingAppendix Torque Values Chart for Common Bolt SizesIn-tpi1 Ft-lb3 · m · m ft-lb Overall Unit and Driveline One year Parts and Labor WarrantyTines and Driveline Friction Discs Considered wear items Corporate Office P.O. Box Salina, Kansas 67402-5060 USA

RTR0550, RTR0542 specifications

Land Pride RTR0542 and RTR0550 are leading models in the realm of rotary tillers, designed to cater to the needs of both agricultural professionals and avid gardeners. With their robust construction and advanced features, these tillers provide efficient soil preparation and cultivation for a variety of applications.

The RTR0542 and RTR0550 models come equipped with high-quality, heat-treated tines that enhance durability and longevity. These tines are engineered for maximum soil penetration and effective tilling, ensuring that the soil is thoroughly mixed and aerated. With a tilling width of 42 inches for the RTR0542 and 50 inches for the RTR0550, these tillers allow users to cover larger areas in less time, making them highly efficient for both large-scale farming and home gardening projects.

One of the standout features of both models is their adjustable side skids. These allow operators to customize the depth of the tilling process, adapting to different soil conditions or planting requirements. This flexibility is essential for optimal seedbed preparation, making the rotary tillers suitable for a wide range of crops, from vegetables to flowers.

The RTR0542 and RTR0550 are built with a sturdy, heavy-duty frame that ensures stability and alignment during operation. This robust construction not only enhances performance but also minimizes wear and tear, further extending the lifespan of the equipment. Additionally, the tillers come with a shielded chain drive system that reduces noise and maintenance needs, offering operators a quieter and more efficient working experience.

Both models feature a quick-hitch compatibility, allowing for easy and efficient attachment to a range of tractors. This convenient design enables users to switch between implements without the need for extensive equipment changes, enhancing productivity and versatility on the farm or in the garden.

Safety is also a priority in the design of RTR0542 and RTR0550. They are equipped with safety shields that protect operators from flying debris while working. The inclusion of durable bearings helps to reduce vibrations, ensuring a smoother operation and improved user comfort.

In summary, Land Pride RTR0542 and RTR0550 rotary tillers offer an impressive combination of durability, efficiency, and versatility. With their advanced features and technologies, these tillers are ideal for anyone looking to achieve superior soil preparation and cultivation for successful planting and gardening endeavors. Whether you are a commercial farmer or a backyard gardener, these models can meet diverse soil management needs effectively.
Top Page Image Contents