|
| 6 INSPECTION, MAINTENANCE AND TROUBLESHOOTING |
|
|
|
SYMPTOMS | FAULTS | SOLUTION |
Height Adjustment (Model 6302GADH Only) |
| |
|
|
|
Tub will not raise or | Glide pads and rub panels not greased | Apply grease to glide pads and rub panels. Refer to Maintenance for |
lower |
| 6302GADH Adjustable Height Rub Panels and Glide Pads on page 30. |
|
|
|
| Bad electrical connections, no electrical | Unplug the tub. Check and reset GFCI. Check electrical cord, plug and |
| power to tub | outlet for damage. Replace damaged parts as necessary per local codes. |
|
|
|
| Actuator overload | Wait five minutes and try to adjust the height again. |
|
|
|
| Actuator burned out | Contact your Invacare Dealer. |
|
|
|
| Obstacle in UP/DOWN travel path | Inspect for and remove any obstacle. |
|
|
|
Maintenance Record
DATE
MAINTENANCE PERSON TYPE OF MAINTENANCE PERFORMED
NOTES
Part No. 1167456 | 31 | Invacare® TheraPure™Supine Whirlpool Tubs |