Clarke S20E manual Figure a b, Machine Controls and Features

Machine Controls and Features

Squeegee Lift Handle, See Figure 2

The squeegee lift handle is located below the control handles in the center. It is used to raise or lower the squeegee. The vac motor is turned on when the handle is lowered to either the first or last position.

NOTE: Squeegee must be raised to at least the first position when the machine is backed up.

Float Shut Off, See Figure 3

The shut-off switch for the vac motor is located in the recovery tank. It automatically turns off the vac motor when the recovery tank is full. NOTE: If excessive foaming in recovery tank, defoamer must be added. Damage to vacuum motor could result from foam.

Parking Brake, See Figures 4a and 4b (Optional) The parking brake prevents movement of the machine. It is located at the rear lower left side of the machine. To engage the brake, push the pedal down (Figure 4a). To release the brake, lift pedal up (Figure 4b).

CAUTION: Do not activate the brake while the

machine is moving.

Figure 2

Figure 3

Figure 4a

Figure 4b

CLARKE TECHNOLOGY Operator's Manual -Encore S20E Page -9-