Driving Instructions
7.Press and hold the brake pedal.
8.To start the vehicle
8.1.Gasoline vehicles: Turn the key to the START position and hold it there until the engine starts. Activate the choke as necessary. If the engine does not start after
8.2.Diesel vehicles: To preheat glow plugs in cold weather, turn the key to the PREHEAT position and hold it there for
9.Release the park brake.
10.Keep the brake pedal engaged, and select direction of travel by placing the shift handle in the desired position (Figure 6 or Figure 7). The engine must be at idle before the shift handle is moved. If equipped with a reverse buzzer, the reverse buzzer will sound as a warning when the Forward/Reverse handle is in the REVERSE position.
11.Release the brake pedal completely, and then slowly press the accelerator pedal. As the accelerator pedal is pressed, the vehicle will begin to move. Vehicle speed will increase as the accelerator is pressed until full speed is reached.
WARNING
•Operator must control vehicle speed when going downhill.
•Never shift the vehicle out of the FORWARD position while going downhill. If you do, you will not be able to shift into the REVERSE position or back into the FORWARD position until stopped.
•Press the brake pedal as necessary and press the accelerator pedal partially when descending a hill. With the accelerator pedal partially pressed, the governor will cause the engine to assist the brakes in controlling downhill speed.
ALL-WHEEL DRIVE (AWD) OPERATION
All HUV 4421 gas and diesel vehicles feature an
WARNING
•When servicing the vehicle with part of the vehicle on jack stands, do not operate the engine with the Forward/Reverse handle in either the FORWARD or REVERSE position. The
•The diameter of all tires on the vehicle must be equal, otherwise the
Under most circumstances the driver will not need to do anything to engage the AWD system; however, the front differential may become locked (rotate at the same speed regardless of the terrain) under certain conditions. If the front differential becomes locked, drive slowly in reverse for at least 10 feet (3 meters), then brake gently. See following WARNING.
HUV 4421 Owner’s Manual | Page 25 |