Cleaning the Vehicle
CLEANING THE VEHICLE
Each vehicle is equipped with an ABS/DR acrylic front body and an
Husqvarna does not recommend any type of pressure washing or steam cleaning. Such a process will expose electrical components to moisture. Moisture entering electrical components can result in water damage and subsequent component failure.
Use
The front body is made of an ABS/DR acrylic cap material similar to the material used to manufacture hot tubs and shower/tub units. Cleaning and repair techniques for the front body are the same as those used on conventional acrylic sheet. Use cleaning and polishing products available at any hardware store where ABS/DR acrylic (hot tubs and shower/tub units) are sold.
The seats of the vehicle will last longer with proper cleaning. Use a solution of 10% liquid soap and warm water applied with a soft cloth. For imbedded dirt, a soft bristle brush may be used. For heavy soiling, difficult stains, or scratches, blemishes, or other body damage, see the appropriate maintenance and service manual. See following NOTE.
NOTE: Dispose of waste water properly.
ACCESSORIES
There is a complete line of accessory equipment available from Husqvarna and our dealers/distributors. You can obtain the name and phone number of your closest Husqvarna contact by visiting our web site at www.usa.husqvarna.com.
Care should be taken that these accessories are properly installed by trained technicians, and that they are used in the manner for which they were designed. See following WARNING.
WARNING
•Custom cab assemblies, canopy tops, weatherproof enclosures, and windshields will not protect occupants from flying objects.
•If the vehicle is equipped with an electric powered bed lift, remove the bed before servicing the bed lift system.
ELECTRIC WINCH ACCESSORY
If your vehicle is equipped with an electric winch, read and follow all manufacturer safety warnings and instructions in the winch operator manual, as well as the following WARNING and CAUTION statements. Make sure a winch warning decal is affixed to the vehicle on the seat support panel next to the receptacle for the remote operation switch. See
Safety Decal and Feature Identification on page 4.
The winch kit available from Husqvarna includes a remote operation switch, which enables the operator to move away from the vehicle and cable. See following WARNING and CAUTION.
WARNING
•Before beginning a winch operation:
–Turn the key switch to the OFF position, put Forward/Reverse handle in the NEUTRAL position, and engage the park brake.
–Do not use winch while persons are seated on the vehicle.
•Stand to the side and away from the vehicle to operate winch.
Page 38 2008 HUV