Husqvarna HUV 4213-GXP owner manual Vehicle Specifications, Specifications HUV4213-GXP

Vehicle Specifications

VEHICLE SPECIFICATIONS

SPECIFICATIONS

HUV4213-GXP

HUV4213-G

POWER SOURCE
Engine: 4-cycle OHV, 400 cc, 13.0 maximum HP @3600 RPM (per SAE J 1940/1349),			•
single-cylinder, air-cooled, with pressure lubrication system
Fuel system: Side-draft carburetor with float bowl, fixed jets, fuel filters, and impulse fuel			•
pump
Governor: Automatic ground-speed sensing, internally geared in unitized transaxle			•
Ignition: Transistor electronic ignition with electronic RPM limiter			•
Unitized transaxle: Fully synchronized forward and reverse with neutral (14.9:1 forward,			•
20.5:1 reverse) and differential lock feature
Electrical system: 12-volt, 500 cca at 0 °F (-17.8 °C), 650 at 32 °F (0 °C). 105-minute			•
reserve capacity and 35-amp charging capacity
Torque converter: Automatic, variable-speed, dry type			•
STEERING/SUSPENSION/BRAKES
Steering: Self-adjusting rack and pinion, Ackerman			•
Suspension:
Front: Independent A-arms with coil-over shocks			•
Rear: Semi-independent suspension with multi-leaf springs and dual hydraulic shocks
Brakes: Hydraulic brake system – self-adjusting drum brakes on each wheel with separate			•
hand-operated park brake
BODY/CHASSIS
Frame/Chassis: Twin I-Beam welded aluminum			•
Side and rear body: All aluminum			•
Cargo bed: Powder-coated steel			•
Front body: ABS/DR acrylic cap			•
Tires: 23 x 10.50 – 12 tubeless, 4-ply rated load range, front and rear			•
DIMENSIONS/WEIGHT
Overall length (box bed configuration)		123.4 in.	(313.4 cm)
Overall width		54 in.	(137 cm)
Overall height (at light bar)		75 in. (187.5 cm)
Wheelbase		80 in.	(203 cm)
Ground clearance:	6.6 in. (17 cm) 11.4 in. (29 cm)
under differential under foot platform
Front wheel tread		43 in.	(109 cm)
Rear wheel tread		44.5 in.		(111 cm)
Weight (dry):	1106 lb.	(493.4 kg)		1063.5 lb. (482.4 kg)
with all-terrain tread with turf tread	1066 lb.	(477.2 kg)		1027.8 lb. (466.2 kg)
Forward speed		17-19 mph (27-31 km/h)
Governed RPM: FE400 Engine		3850 (±30) RPM

Page 40 2008 HUV 4213-G and HUV 4213-GXP Owner’s Manual