Genie S-80, S-85, 43650 manual Check the Hydraulic Oil Level

Second Edition · Fifth Printing Operator's Manual

Deutz F4L 1011F Engine
Oil	capacity	(including filter)	8.5 quarts 8 liters
Oil	viscosity	requirements
below 60°F / 15.5°C (synthetic)			5W-30
-10°F to 90°F / -23°C to 32°C			10W-40
above -4°F / -34°C			15W-40

Engine oil should have properties of API classification CC/SE or CC/SF grades.

Units ship with 10-40 CC/SG.

Perkins 704-30 Engine
Oil	capacity	(including filter)	9.6 quarts 9 liters
Oil	viscosity	requirements
below 60°F / 15.5°C			15W-40
-10°F to 90°F / -23°C to 32°C			10W-30
above -4°F / -34°C			15W-40

Engine oil should have properties of API classification CF4 grade.

Units ship with 10-40 CC/SG.

MAINTENANCE

Check the Hydraulic Oil Level

Maintaining the hydraulic oil at the proper level is essential to machine operation. Improper hydraulic oil levels can damage hydraulic components. Daily checks allow the inspector to identify changes in oil level that might indicate the presence of hydraulic system problems.

1Be sure that the boom is in the stowed position, then visually inspect the sight gauge located on the side of the hydraulic oil tank. Add oil as needed.

Result: The hydraulic oil level should be within the top 2 inches (5 cm) of the sight gauge.

Hydraulic oil specifications

Hydraulic oil type	Dexron equivalent
Tank capacity	45	gallons
	170		liters
Hydraulic system	55	gallons
(including tank)	208		liters

Part No. 43650 Genie S-80 & Genie S-85 13