Husqvarna HUV 4213-GXP owner manual BED Latch and Prop ROD, Front Shock Absorbers

Bed Latch and Prop Rod

BED LATCH AND PROP ROD

See General Warnings on page 9.

DANGER

•Use caution when working under bed. Be sure prop rod is secure. Otherwise the bed will fall, resulting in severe personal injury or death.

WARNING

•For vehicles with cargo beds, remove all cargo before raising the bed or servicing the vehicle. If the vehicle is equipped with a prop rod, ensure that it is securely engaged. Do not close bed until all persons are clear of cargo bed area. Keep hands clear of all crush areas. Do not drop cargo bed; lower gently and keep entire body clear. Failure to heed this warning could result in severe personal injury or death.

The bed latch (Figure 12) has an automatically engaging prop rod and prop rod track (Figure 13) as standard features. To lift the bed, pull the bed latch handle toward the rear of the vehicle and lift the bed. The prop rod will come to rest in one of the notches in the prop rod track. To close the bed, lift the bed so that the prop rod is no longer supported in one of the track notches. Push the prop rod toward the front of the vehicle to free it from the track notch and gently lower the bed. DO NOT drop the bed. See preceding DANGER, WARNING, and following NOTE.

NOTE: The vehicle is equipped with an automatically engaging prop rod (Figure 13), unless equipped with the electric bed lift accessory.

83A 84

Figure 12 Bed Latch Figure 13 Prop Rod

FRONT SHOCK ABSORBERS

The vehicle arrives from the factory with the front coil-over shocks pre-adjusted for optimum vehicle performance. We do not recommend adjusting the shock absorbers unless the vehicle will be equipped with a cab enclosure. In that event, please refer to the cab installation instructions for the shock absorber adjustment procedure.

2008 HUV 4213-G and HUV 4213-GXP Owner’s Manual Page 21