Generac QT04524ANSX owner manual Activation Chart, Choose Language Troubleshooting

Control Panel

ACTIVATION CHART

CHOOSE LANGUAGE				TROUBLESHOOTING
Display Reads:			Use ARROW keys to scroll to desired lan-	If the wrong language is chosen, it can be
			guage. Press ENTER to select.	changed later using the “edit” menu.
Language
-	English	+
Escape		Enter
Display Reads:			Press ENTER to begin the activation pro-	If ESCAPE is pressed instead of ENTER,
			cess.	your generator will only run in manual mode
Activate me (ENT) or				(for test purposes) and NOT ACTIVATED will
ESC to run in manual				be displayed. You will need to reconnect the
				battery and begin with Step 1.
Escape		Enter
Display Reads:			If you do not have your activation code,
			go to www.activategen.com or call
To Activate go to			1-888-9ACTIVATE (922-8482).
www.activategen.com			If you already have your activation code,
			wait 3-5 seconds for the next display.
Escape		Enter

ENTER ACTIVATION CODE (Passcode)				TROUBLESHOOTING
Display Reads:			Use ARROW keys to scroll and find the first
			number of your Activation Code.
Serial 123456789			Press ENTER to select.
Passcode XXXXX +/-			Repeat this step until all digits have been
			entered.
Escape		Enter	Use ESCAPE to correct previous digits.
Display Reads:			Activation is complete when all digits are	What happens if “Wrong Passcode Try
			entered above and your screen shows this	Again” appears?
“SELECT HOUR (0-23)”			display.	Re-enter the activation code. If a second
“-	6	+”	Follow the controller prompts to continue	attempt is unsuccessful, check the number
			setting the time function. Refer to your	against the code given on activategen.com.
Escape		Enter	Owner’s Manual with questions.	If it is correct and the generator will not
				accept it, contact 1-888-9ACTIVATE (922-
				8482).

05/10 A .Rev CntrlNex001

8-2