Briggs & Stratton 13500 Assembly, Unpack Generator, Install Wheel Kit, Generator is supplied with

Page 7

Assembly

Your generator requires some assembly and is ready for use after it has been properly serviced with the recommended fuel and oil.

If you have any problems with the assembly of your generator, please call the generator helpline at (800) 743-4115. If calling for assistance, please have the model, revision, and serial number from the data tag available. See Controls and Features for data tag location.

Install the wheel kit as follows:

1.Tip generator so that generator rests on frame with engine end up.

2.Slide axle (A) through both mounting brackets.

3.Slide a wheel (B) over the axle.

NOTE: Be sure to install both wheels with the air pressure valve on the outboard side.

4.Place a washer (C) on axle and then place an e-ring (D) in axle groove.

Unpack Generator

1.Set the carton on a rigid, flat surface.

2.Remove everything from carton except generator and confirm all listed parts are present.

3.Open carton completely by cutting each corner from top to bottom.

4.Leave generator on carton to install wheel kit.

The generator is supplied with:

•Operator’s manual

•Battery float charger

•Oil bottles

•Wheel kit

Install Wheel Kit

NOTE: Wheel kit is not intended for over-the-road use.

You will need the following tools to install these components:

•7/16” and 13mm socket wrench

•7/16” and 13mm open end wrench

•Pliers

•Safety glasses

CAUTION

E-rings can cause eye injury.

E-rings can spring back and become airborne when installing or removing.

•Always wear eye protection when installing/removing e-rings.

5.Install e-ring with pliers, squeezing from top of e-ring to bottom of axle.

6.Repeat step 3 thru 5 to secure second wheel.

7.Tip generator so that generator rests on frame with engine side down.

8.Attach the vibration mounts (E) to the support leg (F) with 1/4-20 x 1” capscrews (G) and 1/4-20 lock nuts (H).

9.Attach support leg with M8 x 20 mm cap screws (J) and M8 lock nuts (K).

10.Return generator to normal operating position (resting on wheels and support leg).

11.Check each fastener to ensure it is secure and the tires are inflated between 15-40 PSI.

 

B

 

C

 

A

H

 

F

J

D

 

E

 

G

K

 

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operator’s Manual Date Purchased Where to Find UsGenerator EngineTable of Contents Hazard Symbols and Meanings Operator SafetySafety Rules Safety alert symbol is used with a signal wordBroken bones, fractures, bruises, or sprains could result Engine exhaust from this product containsUnintentional sparking can result in fire or electric shock Contact with muffler area can result in serious burnsUnpack Generator AssemblyInstall Wheel Kit Install the wheel kit as followsFuel must meet these requirements Add Engine OilAdd Fuel Replace oil fill cap and fully tightenSystem Ground Attach Negative Battery CableConnecting to a Building’s Electrical System To installClearances and Air Movement Generator LocationItems Not Shown Features and ControlsUsed to supply electrical power for the operation Volt AC, 20 Amp, Duplex Receptacles May beVolt AC, 20 Amp, Duplex Receptacles Cord Sets and ReceptaclesNema L14-30 120/240 Volt AC, 30 Amp, Locking ReceptacleBattery Float Charger Starting the Engine OperationCold Weather Operation Connecting Electrical LoadsOil Pressure Shutdown Stopping the EngineAn emergency, use the original shipping carton Creating a Temporary ShelterCreating a Permanent Shelter Wattage Reference Guide Don’t Overload GeneratorMaintenance Schedule MaintenanceGenerator Maintenance Engine Maintenance Battery MaintenanceOil Service Spark Plug Service Air CleanerTo service the air cleaner, follow these steps Wipe clean inside of base E and cover thoroughlyAir Cooling System Install spark plug and tighten firmlyService Spark Arrester Carburetor AdjustmentStorage Troubleshooting Owner’s Warranty Responsibilities Emissions Control System WarrantyWarranties Emission Information MaintenanceClaims and Coverage Exclusions Limited Warranty Page Common Service Parts Product Specifications800

13500 specifications

The Briggs & Stratton 13500 is a powerful generator designed to provide reliable mobile power for various applications. Known for its robust construction and innovative features, this generator is an excellent choice for both home use and outdoor activities such as camping or tailgating.

One of the standout features of the Briggs & Stratton 13500 is its 13,500 starting watts and 10,000 running watts capability. This impressive output makes it suitable for powering heavy-duty appliances, tools, and other electrical devices during power outages or when engaging in outdoor recreational activities. The generator’s ability to handle large loads provides peace of mind, especially in emergency situations.

This generator is equipped with a high-performance OHV engine that ensures durability and reliable operation. The engine features a cast iron sleeve that enhances longevity and reduces wear over time. Additionally, it has a low-oil shutdown system that automatically engages when the oil level is too low, protecting the engine from damage and prolonging its life.

The Briggs & Stratton 13500 also showcases a user-friendly control panel. This panel includes multiple outlets, such as heavy-duty 120V and 120/240V outlets, allowing users to connect various devices simultaneously. The presence of an easy-to-read Voltmeter and Circuit Breaker protection ensures safety and efficiency when connecting loads.

Another important aspect is the generator’s portability. It features durable wheels and a foldable handle, making transportation easy. Whether you need to relocate it around your property or take it on the go, the Briggs & Stratton 13500 is designed with user convenience in mind.

The generator operates quietly for its size, making it an excellent option for residential neighborhoods where noise pollution can be a concern. Additionally, it is built to be fuel-efficient, meaning users can run the generator for extended periods without frequent refueling.

Safety is a priority with the Briggs & Stratton 13500 as well. It includes features like a surge protector and advanced cooling systems which prevent overheating. This ensures that users can operate the generator confidently without worrying about unexpected failures.

In summary, the Briggs & Stratton 13500 generator stands out with its powerful performance, durable construction, portable design, user-friendly features, and safety mechanisms. Whether for emergency backup power or outdoor activities, this generator provides a reliable solution for a wide range of power needs.
Top Page Image Contents