MTD 31A-020-900 manual While Operating

Page 5

RULES FOR SAFE OPERATION

13.Wear rubber boots when operating the snow mover.

14.Cautionary statements regarding the use of proper clothing and footwea during operations to reduce the risk of injury that may be caused by flying debris.

15.Operation of the snow mover in the hand-held posi- tion is unsafe, except in accordance with the special instructions for such use provided in the operator’s manual.

16.WARNING - This snow mover should be grounded while in use to protect the operator form electric shock. To prevent electric shock use only with an extension cord suitable for outdoor use.

17.EXTENSION CORD - To prevent disconnection of snow mover cord from the extension cord during operation.

18.AVOID ACCIDENTAL STARING - Don’t carry plugged - in snow mover with finger on switch. Be sure switch is off when plugging in.

19.If cord is damaged in any manner while plugged in, pull extension cord from wall receptacle.

20.DON’T ABUSE CORD - Never carry snow mover by cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp edges.

21.Keep hands away from moving parts.

22.Keep guards in place and in working order.

23.DON’T FORCES SNOW MOVER - It will perform better and safer at the rate for which it was designed.

24.DON’T OVERREACH - Keep proper footing and balance at all times.

25.If the snow mover strikes a foreign object follow these steps:

i)Stop snow mover.

ii)Inspect for damage.

iii)Repair any damage before restarting and operat- ing the snow mover.

26.DISCONNECT SNOW MOVER - Disconnect the snow mover from the power supply when not in use, before servicing, when changing accessories, and the like.

27.STORE IDLE SNOW MOVERS INDOORS - When not in use, snow movers should be stored indoors in dry, locked-up place - out of reach of children.

28.MAINTAIN SNOW MOVERS WITH CARE - Follow instructions for lubricating and changing acces- sories.

29.Don’t use any other accessory or attachment might incrase the risk of injury.

WHILE OPERATING

1.Walk, never run.

2.Be sure the snow thrower is not in contact with any- thing before staring the unit.

3.Stay away from the discharge opening at all times. Keep face, hands, and feet away from concealed moving or rotating parts.

4.Be attentive when using the snow thrower, and stay alert for holes in the terrain and other hidden hazards or traffic.

5.Do not use on a gravel surface or crushed rock sur- faces. Use extreme caution when crossing gravel/crushed rock drives, walks, or roads.

6.Never clear snow from steep slopes.

7.Never attempt to use the snow thrower on a roof or any steep, inclined, slippery surfaces.

8.Never operate snow thrower without proper guards, plates or other safety protective devices in place.

9.Never operate the snow thrower near glass enclo- sures, automobiles, trucks, window wells, dropoffs, etc. without proper adjustment of the snow discharge angle. Keep children and pets away.

10.Don’t force or overload the snow thrower. The snow thrower will perform at its best and safest when it is run at the rate for which it was designed.

11.Never direct discharge towards people or allow any- one in front of the unit while operating.

12.Wear safety glasses or goggles that are marked as meeting ANSI Z87.1 standards, and ear/hearing pro- tection when operating this unit.

13.Use the unit only in daylight or good artificial light.

14.Avoid accidental starting. Remain in the starting posi- tion whenever starting the unit. The operator and unit must be in a stable position while starting.

15.Use the right tool. Only use this tool for the purpose intended.

16.Do not overreach. Always keep proper footing and balance.

17.Always hold the unit with both hands when operating. Keep a firm grip on handles or grips.

18.Keep hands, face, and feet at a distance from all moving parts. Do not touch or try to stop the rotor when it is rotating.

19.If the rotor will not rotate freely due to frozen ice, thaw the unit thoroughly before attempting to operate it under power.

20.Keep the rotor clear of debris.

21.Never attempt to clear the rotor with the motor run- ning. Turn the motor off first and unplug the extension cord.

4

Image 5
Contents Operator’s Manual Table of Contents Before Operating Rules for Safe OperationPlease Read Save These Instructions While Operating Other Safety Warnings Warranty SymbolSafety and International Symbols Rear Operating Instructions Adjust Shaft LengthConnect the Cord Positioning the Assist HandleTips for Best Snow Throwing Results Overload Protection SwitchOperating the Snow Thrower INSPECTING/REPLACING the Drive Belt Maintenance InstructionsServicing the Unit Replacing the Plate CleaningStorage TransportingSpecifications TroubleshootingParts No Description Parts ListPage MTD LLC Manuel de Utilisation Table DES Matières Consignes DE Sécurité Alerte DE SécuritéAvertissement Pendant Lutilisation Autres Avertissement DE Securite Conserver CES InstructionsSymbole Signification Symbole Alerte DE Sécurité Symboles DE Sécurité ET InternationauxConsignes DE Sécurité Branchez LE Cordon Instructions Pour MontageReglez LA Longueur DE Larbre Positionnement DE LA Poignee DAS- SistanceAstuces Pour UN Meilleur Deneigeage Resultats Interrupteur DE Protection Contre LES SurchargesUtilisation DE LA Deneigeuse Instructions DE Mantenimiento Maintenance DE LappareilINSPECTION/REMPLACEMENT DE LA COUR- Roie Emmagasinage Remplacement DE LA PlaqueNettoyage TransportCaractéristiques DépannagePièce Description Liste DES PiècesPage MTD LLC Manuel del Dueño/Operador Índice Antes DEL USO Reglas DE Funcionamiento SeguroSI Tiene PREGUNTAS, Llame AL Advertencia Durante EL USO Explicacion DE NOTA, Advertencia Y Simbolo DE Garantia Otras Advertencias DE SeguridadSeguridad Y Símbolos Internacionales ASA Conecte EL Cable Instrucciones DE EnsambleAjuste DE LA Longitud DEL EJE Colocación DEL ASA DE ApoyoSugerencias Para Conseguir LOS Mejores Resultados Interruptor DE Protección DE SobrecargaUSO DEL Quitanieves Inspeccionar / Reemplazar LA Cinta DE Transmisión Instrucciones DE MaintenimientoReparación DEL Equipo Almacenamiento Reemplazar LA PlacaLimpieza TransporteEspecificaciones Resolucion DE ProblemasComponente Descripción Lista DE PiezasNotas MTD LLC Page Stop

31A-020-900 specifications

The MTD 31A-020-900 is a standout model in the realm of outdoor power equipment, specifically designed for homeowners seeking effective lawn care solutions. Known for its robust construction and user-friendly features, this machine has gained favor among gardening enthusiasts.

One of the key attributes of the MTD 31A-020-900 is its powerful engine. Equipped with a reliable gas engine, the unit provides enough power to tackle a variety of tasks, from mowing to mulching. This engine is designed not only for efficiency but also for fuel economy, minimizing the need for frequent refueling and allowing users to cover larger areas in one go.

The cutting deck of the MTD 31A-020-900 is another highlight. It features a wide cutting path that allows for quick mowing, significantly reducing the time required to maintain your lawn. Additionally, the adjustable cutting height gives users the flexibility to choose their preferred grass length, catering to different lawn types and seasonal requirements.

In terms of maneuverability, the MTD 31A-020-900 is designed with user comfort in mind. Its ergonomic handles and lightweight design make it easy to navigate around obstacles and tight spaces in the garden. The inclusion of large wheels further enhances its stability and performance on uneven terrain, ensuring a smooth mowing experience.

The machine also boasts advanced safety features, including a blade brake that stops the blades quickly when the user releases the throttle. This feature is particularly important for preventing accidents and ensuring that the mowing process is as safe as possible.

Moreover, the MTD 31A-020-900 is equipped with a reliable start system, making it easy for users to get started right away without unnecessary hassle. With its reliable ignition and smooth operation, both novice and experienced users can enjoy a seamless lawn care experience.

In conclusion, the MTD 31A-020-900 stands out as a powerful, efficient, and user-friendly lawn mower. Its strong engine, versatile cutting options, and focus on safety and ease of use make it an excellent choice for anyone looking to maintain a beautiful lawn with minimal effort. This machine is well-suited for residential applications, providing the reliability and performance that today's homeowners desire.